Reviews: Rubicon Express 3.5" Standard Coil Lift Kit with Monotube Shocks - RE7142M

I wasn't sure which lift to get so I went with what 4wheelparts (Portland) recommended, the 3.5" on 35's. They did the install and it turned out perfect!!!! I couldn't be happier. It looks great, perfect height, especially with the 35's. Not too tall, just perfect. It still works well as a daily driver, and is more that capable to handle most off road adventures. I've thoroughly tested it in mud, sand and rocks and it's great. Thanks Austin (Portland,OR shop).

I've had this lift for 18 months and I totally love it. Rides great very comfortable not stiff at all. I have an aftermarket bumpers front/rears/tire carrier with 35" tires and winch. The only thing I would suggest especially if you are going to have the set up like mine is to get the .50 leveling kit TER1954105 so the rear evens with the front. I'm about to put the leveling kit because I think my rear is sagging a bit from the tire.

The lift can easily be installed in a garage. The instructions were fairly detailed. There were a few times there could have been better pictures or instructions. The worst part of the installation was knocking out or cutting out the tabs in the control arm brackets. You will most likely need a really good carbide cutting bit for a die grinder. This will make the installation much easier and faster.

Really easy install and it rides great. It gave me almost 5" of lift without aftermarket bumpers.

I used this product to give my 14 jku a little extra clearance. If you own a 2012 or later jk you will need an exhaust mod. If you read the directions you will need 1.5 inch spacers to run your stock wheels.