Reviews: Pro Comp 89 Series Kore, 16x8 Wheel with 6 on 4.5 Bolt Pattern - Matte Black - 7089-6868

This wheel is by far the most bad *** looking wheel you can put on your 2005-2016 Xterra Mind you there might be some front fender trimming if you run 285s instead of 265s. and even then might have to check as these rims stick out just a little cause of their offset.. but anybody shop can fix that.

These wheels looks great on my Xterra with 265/70R16 KO2s. Very happy with the offset and more aggressive stance. Love them.

Wheels look awesome on my Xterra. They were the lowest cost that I found on Internet for these wheels. Could not believe how fast I received them. Ordered them on a Tues. am and got them by 11am the following day.

Good solid rims for a great price! Good looking and well made. Come with the matching center caps too.

Great fit and look for Nissan Xterra. Works well with BFG KO2s 285/75/r16. Needed to cut/bend a little of the front and rear fenders to avoid rubbing but totally worth it.

For the money you can't beat these wheels! They are well-built and look great on my 05 Xterra...shipping was quick, and they came packaged well with no damage. Make sure you get splined lug nuts because most likely the stock lugs may be too wide to fit into the narrower diameter holes common with aftermarket wheels (i got mine from tulip city wheels, which also has great customer service). You will not be disappointed with these wheels, and getting them from 4wheelparts is the cherry on top!

These wheels look great and fit perfectly on my 1998 Chevy 1500, with 35x12.50 LTB's with only a 3" suspension lift. The only minor problem could be the the nonstandard lug nuts; I would suggest buying an extra set as well as the socket, especially if you go out in the woods.

I looked for weeks to find any wheel available in my lug pattern and came across Pro Comp Extreams. I ordered the polished version of this wheel but it was on back order for a few months so I settled on the black ones. The wheels are decent, nothing special but not too costly until you add the lug nuts (and in my case shipping). The biggest issue I have with this wheel is the center cap, it only sticks 1/4" out of the opening unlike the picture which looks like it sticks about 3" out. Another issue with the center cap is it is the cheapest thing I've ever seen, cardboard would have been more durable. This wheel is truly ruined by the center caps! I'd send them back but I live in Europe so it'll cost as much to send them back as it will to keep them and they are going on an $800 mud truck so I'll just run them capless.

Put these rims on an '05 Nissan Frontier. Even with our terrible bolt pattern companies like Pro Comp still make excellent products for our trucks. Pros: Looks awesome, they have a good stance with the offset allowing the truck to really dig into turns, fits a hard to find bolt pattern. They are relatively light compared to the stock wheels and at 8 inches wide allows you to fit a wider tire than the stock wheels. If you have them, the TPMS sensors will fit these wheels! Cons: I have stock size BFG AT's and because of the harder cut on the edges of the tire, and the offset of the wheels, they rub. I had to cut the fender wells at stock height, should be fixed with a lift. They're hard to get balanced, the sticky weights don't stick to the finish so your only option is a clip on weight on the inside lip, it's ok but you can't really get a good balance and you will get a wobble, it's not too bad and this truck is my daily driver, really only notice it around 50mph+. Personally I like the offset, but some states have requirements about tires not sticking out past the fender so may not work for all people. More cons than pros just so you know at worst what you're getting, would definitely recommend these wheels. Only reason for the 4 star instead of 5 was the finish/powder coating. I wish the tape weights would stick for a better balance and it seems like they could scratch easy when mounting or dismounting a tire(although no problem with mine).