Reviews: FOX 2.0 Factory Series Smooth Body Stabilizers

Easy to install. A bit spendy, but noticeable improvement on front end stability. Maybe not a substitute for steering assist, but most likely the next best thing. Stock stabilizer was blown and factory track bar was binding. Developed the dreaded death wobble. Installed adjustable trackbar and this badboy. Death wobble be gone!

I have a 2020 Gladiator that already started getting the”death wobble” at highway speeds when I would hit a bump. This steering stabilizer completely took care of the wobble!

Love this! Wish I would have done this mod waaayyy earlier, completely eliminated any wobble in my steering. Worth the extra $$ to purchase the ATS vs the TS in my opinion.

I’ve only put a few hundred miles on since installing the Fox 2.0 ATS but it seems to have helped with the famous Jeep lane drift and help control death wobble amplification. Overly expensive but seems worthwhile so far.

My OEM stabilizer started leaking on JLUR and death wobble started happening, I installed this and it fixed it. Also nice having 24 settings and easy install.

Helps a Jeep with 1ton axle not feel as flighty in the front end after axle swap. Steering is 2.5 ton all in tune. Nice being able to adjust the stabilizer down for the trail and back up for the street.

After putting 37’s on my 19 Rubicon JLU the stock stabilizer wasn’t able to handle the load, especially in windy conditions. Installed this, set the adjustment to a firmer setting, drives like a Cadillac now. 100% recommend.

Awesome product. Only thing I had to do to make it fit my 1 3/4 in track bar was to make the mounting clamp hole bigger. Took some time with a sanding drum but it worked out perfect. They don’t make the mounts that big so that was my reasoning to custom fit my mount. I also loved the fox mount so I didn’t want to fabricate anything making it look like it was supposed to be there. Overall awesome!

Very solid unit with pretty straight forward installation. I had a regular Fox 2.0 unit installed prior and have noticed an immediate difference in the neutrality of the wheel. I had grown used to holding the wheel to overcome the slight push to one side that I had. Steering is smooth and push free. love it. Should have done it sooner considering all of the other nice parts I have on my Rubicon

I have a 2018 Rubicon 4-door with the Mopar lift and 35's front and rear. Almost from the beginning I have been dealing with the dreaded death wobble. I've tried multiple wheel balancing, tire rotations, special alignment settings, different tire pressures, aa Rough Country steering stabilizer, all to no avail. I was about to spend $3000 to get a new set of tires and wheels to see if that would finally help but one of the local off-road upfitters recommended I try this. They said 9 out of 10 times this would work. Well I am pleasantly shocked. I installed this part 3 weeks ago and not a single wobble since. I have tried to induce the wobble, which used to be fairly easy to do, and I have been unsuccessful. If you have Jeep death wobble you need this part. Thank you Fox!

Install was a little more difficult than video showed. Have noticed more tightness in steering when turned up to highest settings