Reviews: Body Armor 4x4 Front Skid Plates

This product makes any jeep look tough like a tank

Super easy to install and fantastic good looks. Completes my body armor front bumper perfectly.

I bought this to replace the plastic valance under the front bumper to actually protect the electronic sway bar disconnect on my Rubi and it does that perfectly. It has held up to hits & scrapes going forward and reversing off obstacles without much more than a few scratches. My only issue with it was I needed a second pair of hands to help install it, so I ended up using a hydraulic jack to hold it in place while I bolted it on. Beyond that I can't fault this item in any way so far.

I have their bumper on my '08 Wranger Rubicon. This fixed the freeway speed wind buffeting and hood rise due to wind. Doubles as a front air dam.

Excellent quality. Bolted right on to my 2012 jeep JKUR. took about 10 minutes. Only issue is that it has BODY ARMOR 4X4 cut out and that allows alot of mud to be pushed through.

Bought this to replace plastic wind dam. Saw three different ones. One was 1/16" too thin, one was a 1/4" which seemed way too heavy and this one at an 1/8". Weighs around 15 pounds I believe. I used jack stands to balance it up against the cross member. Took me a little while to figure that out. Once I did, install was easy.

I modified it to make it pop with a custom red plate behind lettering. Otherwise you can not see the Letters AT ALL! So if you buy have a plan for that, the white lettering does not exist. I did red and it looks AWESOME!

The JK comes with a flimsy plastic front "skid plate" that will not protect from any damage, except bugs. The Off Road 4x4 skid plate installed easy with only one bolt hole to drill, the passenger side had an elongated slot in place that allows adjustment, it looks good and protects well and came with all needed hardware.