Just put these Bump Stops on my ‘05 Rubicon . Replaced the old , rotten , rubber , stock bump stops . I cut them to the length I needed with my chop saw and reshaped the bottom edge with a grinder . Exactly what I needed .

4 Wheel parts has the best customer service . The part did not fit ,The manufacturer has numbers mixed up. 4 Wheel parts had me the right one by noon the next day.. Awesome

Great fit, can be trimmed for smaller lifts, so far they are standing up to some pretty good abuse. Installed in my 04 Rubicon with a three inch lift. Trimmed about 1 1/2 inches off with no adverse effects. Would purchase again.

Fit the stock, front bumpstop cups perfectly on my 2008 Dodge Ram 3500 4x4.

These are high quality pieces, look good, and work as intended. My only beef is that they are difficult to install, they are hard to press into the cups! I used a floor jack to bottom out the suspension and push them in. I suppose they have to be stiff so they won't squirm out of the cups. They work as intended, and could be cut if you wanted a little more travel.

Works great , need to use a little grease to install

Easy installation, correct fit and work as intended--all you can ask!