Synergy Manufacturing Heavy-Duty Drag Link - 8701-01

• Fitment: Direct Fit
• Ram 2500
• 13-Current Ram 3500
• Min collapsed length: 39.13 inches
• Max extended length: 41.50 inches
• CNC formed from 1.75 inch x .188 wall seamless chromoly tubing and heat treated after forming
• Improves strength and steering feel and eliminates any chance of bending
• Offers a more direct connection to the road compared to stock
• no more bent drag links and constantly having to align your vehicle
• Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
• Includes grease fittings/replaceable dust boots for ease of maintenance
• Synergy High Performance Grease recommended (4119)
• Eliminates unwanted drag link flop
• Drag Link length adjustable on the vehicle
• Compatible with stock wheels and tires
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Ram Adjustable Track Bar - 8550-11

• Fitment: Direct Fit
• 03-13 Dodge Ram 2500 4x4, 03-12 Dodge Ram 3500 4x4, 06-08 Dodge Ram 1500 Megacab 4x4
• Front track bar
• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts & hardware
• Made from high quality 1.5" x .250" wall DOM tubing
• Allows centering of front axle when running a suspension lift
• Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
• Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing 2013 + Ram 3500 Leveling System - 8750-11

• Fitment: Direct Fit
• 2013+ Ram 2300 diesel models
• Kit includes: pair of front coil springs
• Front and rear Synergy tuned Fox shocks
• Raises the front suspension to level the truck
• Increases ride comfort and control
• Increases small bump compliance and bottom out resistance
• Increases wheel travel
• No loss in towing capacity
• Will allow installation of 35 inch or 37 inch tires
• Affordable Quality, made in the USA
• Proprietary Synergy tuned Fox shocks matched to the Ram's spring rates and weight provide incredible ride quality and control
• Front wheel travel is increased 40 percent from 7 inches to 10 inches and rear wheel travel is increased from 6.5 inches to 10 inches on 3500 trucks
• Progressive wound linear coil springs are manufactured using the latest in CNC hot winding technology for optimized on and off road performance
• Coil springs are softer than stock and raise the front of the truck 2.25 inches based on the weight of a 2500 Diesel Crew Cab configuration
• Coil springs are cycled to set height and can compress to solid without overstressing
• Coil springs feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Front Radius Arm Drop Brackets - 8730-03

• Fitment: Direct Fit
• Designed to be used with 2.5 - 6 inch front lift springs
• Improved ride quality by maintaining factory suspension geometry at lifted ride heights
• Adjustable axle placement for oversized tires and taller lifts
• Drop brackets lower the front control arm mounting position 3 inches at the fRame side
• Maintains factory geometry on lifted vehicles. Bolt-on design allows installation with simple hand tools
• CAD designed from heavy duty 3/16 inch steel plate and includes an integrated, crush resistant, grade 50 A-572 steel skid plate
• Stainless steel flippable cam spacers allow the axle to be located 1/2 inch forward or 1-1/2 inches forward to allow clearance for larger tires and taller lifts
• Drop brackets do not need to be removed to service the drivetrain
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Jeep JK/WJ Heavy Duty Ball Joint Set - 8009-12

• Fitment: Direct Fit
• Factory Replacement for Most Dana 44 and Dana 30 Applications
• Fully Greasable
• Sintered Metal On Bushing Design
• Silicone Boot
• 2 Upper Ball Joints
• 2 Lower Ball Joints
• Fits Jeep JK and WJ Including Rubicon
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Dodge Truck Heavy Duty Drag Link Kit - 8567-11

• Fitment: Direct Fit
• 4WD models only
• Drag Link is bent to clear factory axle brackets and is compatible from stock to 4 inch lift. Vehicles over 4 inch of lift will require a drop pitman arm compatibility
• Made from 1-1/2 inch x .250 wall DOM tubing
• Synergy Double Adjuster Sleeve: allows adjustment of Drag Link length without removing it from the vehicle
• Drag Link comes with Synergy HD metal on metal tie rod ends, 03-13 Trucks: 4133-L and 4160-L (Pitman arm side is 4133-L)
• Suspension components feature an abrasive resistant Powdercoat finish maximum durability and corrosion resistance
• 100 percent bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Strongest Dodge Drag Link on the market!
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Front Track Bar Relocation Bracket Kit - 8855-11

• Fitment: Direct Fit
• Correctly re-centers front axle at 3" lift height without a track bar
• Raises vehicle roll center height for improved stability and reduced body roll
• Lessens track bar angle to improve geometry
• Raises front track bar 3.125" from stock location
• Laser cut and CNC formed from 3/16 and 1/4 inch steel for precision fit and maximum durability
• Securely indexes to the factory track bar bracket and reinforces with additional attachment points
• Raises axle side sway bar mounting holes to improve geometry for lifted Jeeps
• 100 percent bolt-on design assures an easy, trouble free installation with the use of basic hand tools
• No cutting or drilling required
• Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing HD Metal on Metal Tie Rod End (7/8-18 LH) - 4131-L

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Left hand thread
• 4131-L are designed specifically to be used in the following Synergy products: 8000-01 Drag Link (knuckle side only), 8001 Drag Link (knuckle side only), 8002 Tie Rod
• Fully greasable sintered metal-on-metal bushing design has high wear resistance
• Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
• Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
• Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface
• Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
• Single Plane tie rod ends offer misalignment in one direction of movement only. This eliminates drag link flop on the products they are designed for
• Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race
• Boots are made from tear/wear resistant black NBR and come with retaining springs
• Includes all necessary hardware for installation
• Synergy High Performance Grease (4119) is the recommended grease for this product
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Steering Stabilizer Clamp (1-1/2" OD Tube) - 4050-50

• Fitment: Direct Fit
• Fits factory Jeep JK tie rod
• Synergy Jeep JK tie rod
• Synergy Jeep TJ/XJ/ZJ/MJ drag link
• CNC machined from 1020 DOM material
• Zinc plated for maximum corrosion resistance
• Designed to mount factory and aftermarket style steering stabilizers utilizing a 1/2 inch mounting bolt and has a 5/8 inch mounting hole
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Note: Some late model Jeep JK (2011+) factory stabilizers will require the inner bushing sleeve to be drilled out to 1/2" for compatibility
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Front Track Bar Relocation Bracket - 8055

• Fitment: Direct Fit
• Compatible with 3.0 inch and taller lifts
• Laser cut from 3/16 inch steel
• 2 stage powdercoat finish
• Made in the U.S.A
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Hub Centric Wheel Spacers - 8810-02

• Fitment: Universal Fit
• Synergy wheel spacers
• Width: 1 3/4"
• Wheel Stud Size: M14 x 1.50
• Wheel hub centric for increased strength
• CNC machined from billet 6061-T6 aluminum
• Features corrosion resistant red anodizing
• High grade wheel studs and lug nuts
• Can be used with factory or after market wheels
• Includes Loctite
• Sold as a pair
• California Residents: WARNING
+ View More Specs - View Less Specs

Tow Ready Multi-Plug T-One(R) Connector Assembly - 20137

• Fitment: Direct Fit
• Multi-Plug T-One Connector Assembly
• 7-Way Flat Pin Connector/4-Flat Combo Adapter Harness For 7-Way OEM
• California Residents: WARNING

Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Synergy Jeep JK heavy duty front lower control arm frame bracket
• Replaces the weak factory front lower control arm mounts on the frame which often get destroyed from wheeling
• Laser cut & CNC formed from high strength 3/16" steel
• Designed to locate control arms in the factory location
• Built in lower skid plate helps to slide over obstacles
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Steering Stabilizer Clamp Adapter - 4051-01

• Fitment: Universal Fit
• Fits FOX TS and ATS Steering Stabilizers
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Zinc plated Hardware for maximum corrosion resistance
• Stepped washer is machined from 6061 billet aluminum
• Can be used with multiple sized clamps
• Flat head socket cap screw
• Machined aluminum washer
• To be used with Synergy 4050 clamps
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Front Upper Control Arm Bushing, Axle End - 4326-02

• Fitment: Universal Fit
• Front upper control arm bushing for Synergy axle truss' 8012-15, 8012-16
• 2 inch mounting width
• 12mm bolt size
• Synergy Dual Durometer Bushing (DDB) Series
• Feature a maintenance free, grease less design
• Outer "soft" durometer acts as bushing cushion and flex material
• Inner "hard" durometer lining acts as the bearing surface to allow free floating inner sleeve to rotate. Provides for a maintenance free "zero bind" bushing
• Internal bushing ring separates inner and outer materials to prevent inner sleeve gaping at extreme flex
• Direct replacement available for aftermarket control arms using OEM Clevite style lower control arm bushings
• Bushings available for all suspension components made by Synergy MFG as well as many other companies
• Bushings are sold complete with inner sleeve installed
• IMPORTANT: Dual Durometer Bushings (DDB) are not a replacement for Synergy products that originally came with Johnny Joints. These bushings are only replacements for Synergy products that came with Dual Durometer Bushings (DDB)
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Front Bump Stop Drops - 8734-20