Fab Fours Elite Ranch Front Bumpers

From $1,919.99

• Combination Pipe and Smooth Plate Construction
• Matte Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• OE Styles ELITE Badge Included
• Optional Bolt-on Winch Mount (Accepts up to 16,500 lb. winches or smaller)
• Optional Bolt-on 1 inch D-ring mounts
• Optional Bolt-on 2 inch Receiver
• 100% Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit

From $275.00

• Front Track Bar & Sector Shaft Brace Kit
• 2 and 4-door models
• Includes SYN8069-01 & SYN8069-02
• Steering Sector Brace
• Track bar brace
• Laser cut and CNC bent from 3/16" high strength steel
• Gray powder coat finish for maximum corrosion resistance
• Bolt on installation
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Grab Handles

From $100.00

• Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
• California Residents: WARNING

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Fab Fours Elite Hi-Flow Lower Guards

From $149.99

• Available in Bare steel or Powder coat
• Elite Hi-Flow Lower Guard
• For 3/4 And 1 Ton Trucks
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Fab Fours Replacement Rear Bumpers

From $1,049.99

• 3/16 inch Steel Construction
• D-Rings are cut with 3/4 inch steel and will accept up to a 7/8 inch Shackle
• Retain OEM Receiver Hitch and Wiring Location
• Fab Fours 2 Stage Black Powder Coat
• Weight: 115 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

Synergy Manufacturing Air Compressor Brackets

From $60.00

• Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
• Works with VIAIR 100, 400, & 450 series compressors
• California Residents: WARNING

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Fab Fours 2" Receiver Hitches

From $119.99

• Bolt-on application
• 2' receiver

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Fab Fours Hi-Lift Jack Mounts

From $109.99

• Securely carries a Hi-Lift jack on the rear bumper
• 3/16 inch steel construction
• 100% Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Lower Control Arm

From $575.00

Synergy Manufacturing Rear Stretch Bracket Kit

From $1,480.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Fab Fours Differential Cover Assembly

From $299.99

• Fabricated From 1/4in. Plate Steel With 3/8in. Mounting Ring
• Black Powder Coat
• Protects Ring Gear And Center Section
• Maintains Original ConTours And Ground Clearance
• Supplied With A Lube Locker Gasket
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING