RockJock Currectlync Heavy-Duty Tie Rod System - CE-9701

• Fitment: Direct Fit
• TJ Wrangler - All Models (with stock outer steering knuckles)
• TJ Wrangler Unlimited (LJ) - All Models (with stock outer steering knuckles)
• XJ Cherokee - All Models (with stock outer steering knuckles)
• MJ Comanche - All Models (with stock outer steering knuckles)
• ZJ Grand Cherokee - All Models (with stock outer steering knuckles)
• (1) Tie Rod Assembly
• (1) Drag Link Assembly
• (1) Steering Stabilizer Shock Bracket Kit
• Intended for use with 0–4 in. of lift out of the box
• Can be used with up to 5 in.–6 in. of lift, but requires the use of a 2 in. dropped pitman arm for any lift amount over 4 in
• Vehicles must be equipped with a 2 in. bump stop extension over stock – regardless of lift amount
• For use on factory Dana 30 and Dana 44 differentials – or aftermarket axles that retain the factory outer steering knuckles
• All 4 rod end tapers are designed to fit the vehicles stock, original taper for ease of installation. If your tapers have been enlarged or drilled out – this will no longer be a bolt-on kit
• Tie Rod = 1 1/4 in. dia. solid alloy steel
• Tie Rod Ends = 22mm x 1.5 RH/LH threads, forged steel
• Drag Link = 1 1/4 in. dia. forged steel
• Drag Link Ends = 1 1/8 in.-16 RH/LH threads, forged steel
• Steering Stabilizer Shock Bracket Plate = 1/4 in. laser cut steel
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Antirock Front Sway Bar Kit - CE-9900

• Fitment: Direct Fit
• 97-06 Wrangler TJ/LJ
• Front sway bar kit
• SAE 4130 heat treated steel
• Includes all necessary components
• Bushings and hardware included
• Step by step installation instructions
• CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Heavy-Duty Drag Link - CE-9701DLO

• Fitment: Direct Fit
• Link only, no rod ends
• Replacement unit
• California Residents: WARNING

RockJock Currectlync Heavy-Duty Tie Rod - Complete - CE-9701TR

• Fitment: Direct Fit
• 1-1/4 inch diameter solid alloy steel
• 7/8 inch thread tie rod ends
• 200% stronger than stock
• California Residents: WARNING

Fastway FLASH E Series Heavy-Duty Ball Mount (Aluminum) - 42-00-2625

• Fitment: Universal Fit
• Fits 2.5 inch receiver
• 6 inch drop
• 1,800 lb. max tongue wt.
• 18,000 lb. max trailer wt.
• Aluminum
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Drag Link End - CE-9701DLR

• Fitment: Direct Fit
• For RockJocks Currectlync tie rod
• Left hand thread
• 1-1/8 inch thread for added strength
• Includes grease fitting
• California Residents: WARNING
+ View More Specs - View Less Specs

Fastway Equal-i-zer Adjustable 2" Shank with 3" Drop or 7" Rise (Black) - 90-02-4100

• Fitment: Universal Fit
• Designed for use with No Shank Equal-i-zer hitch weight distribution systems
• Constructed of the highest quality American steel
• Hand dipped painted for corrosion resistance and lasting performance
• Provides both drop and rise
• Fits: 2-1/2" trailer hitch receivers
• Tongue weight: 600 lbs - 1,400 lbs
• Overall length: 12"
• Maximum rise: 7" from top of hitch receiver opening
• Maximum drop: 3" from top of hitch receiver opening
• Incremental adjustment: 1-1/4"
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Oversized Steering Stabilizer Bracket - CE-9701SB

• Fitment: Direct Fit
• 97-06 Wrangler TJ/LJ
• 84-01 Cherokee XJ
• 86-92 Comanche MJ
• Fits RockJock Currectlync heavy dutytie rod system but also fits 1-1/4 inch tie rod
• Includes the bracket plate, the two 3/8 inch-24 thread u-bolts, lock washers and nuts
• Sold as a kit
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Rear Sway Bar Extended Links - CE-9142

• Fitment: Direct Fit
• For vehicles with up to 4-1/2 inch of lift
• 4 inch longer than factory
• Sold As A Pair
• California Residents: WARNING

Fastway Flash E-Series HD Dual Lock Pack with 2 Keys - 86-00-3685

• Fitment: Universal Fit
• Specially designed to fit the Fastway Flash E series HD ball mount
• Securely locks both the ball holder to the drop bar and the drop bar in the receiver
• High strength ball interlock for simple, smooth and secure locking
• Drill resistant barrel lock is an extra level of protection
• Cannot be false locked
• 1/4 turn lock and unlock is fast and easy
• Water tight dust cap and o-ring extend lock life by protecting it from dirt and water
• California Residents: WARNING
+ View More Specs - View Less Specs

Fastway 4" Flip Jack Foot - 88-00-4500

• Fitment: Universal Fit
• 4,000 lb lift capacity
• 1,600 lbs. tongue weight
• Elimiantes extra gear to store
• California Residents: WARNING

Rock Jock Johnny Joint Kit - CE-9102K1

• Fitment: Direct Fit
• Dana 30 or 44 front axles
• Replace the front differential housing upper control arm bushings
• Includes a Johnny Joint insert for gear case ear and installation tool,
• 1" thick flame-cut steel upright for the tube side with the Johnny Joint® already installed
• Cut off the top of the stock bracket that is on the tube and install the new RockJock piece into the existing bracket base
• Requires cutting and welding equipment for installation
• This kit included larger than stock, 1/2" greasable hardware for use in performance applications
• Control arm holes will have to be drilled to accept the 1/2" bolts
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Narrow 2" Johnny Joint Forging (1" RH Thread) - CE-9112N

• Narrow 2" Forged Johnny Joint
• 1"-14 RH threaded stud - Forging only
• No internal parts
• California Residents: WARNING

RockJock Narrow 2" Forged Johnny Joint (1" LH Thread) - CE-9112N-L

• Narrow 2" Forged Johnny Joint
• 1" LH threaded stud
• Forging only
• Sold individually
• California Residents: WARNING

RockJock Currectlync Heavy-Duty Tie Rod - CE-9701TRN

• Fitment: Direct Fit
• 1-1/4 inch tie rod bar
• No tie rod ends
• Uses RockJocks 7/8 inch tie rod ends
• 200% stronger than stock
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock 4 Inch Johnny Joint Lift Kit - CE-9800H