DECKED Truck Bed Storage Systems

From $1,290.99

• Built from 100% recycled high density polyethylene co-molded to a steel sub frame (most of the steel is also recycled)
• No drilling needed
• system attaches to the existing tie-downs in your truck
• Precise fit ensures no gaps between the deck and sidewalls of your truck bed
• Drawers are engineered to hold 200 lbs. each while still rolling smoothly
• Oversized cast aluminum handles
• Full bed-length drawers roll smoothly on sealed bearing wheels
• Drawers are weatherproof
• Ammo cans provide four areas of additional storage on either side of the wheel wells
• flip the lids and you have eight beverage holders or a handy place to store nuts, bolts, or screws when working on or near your truck
• Stainless steel edge guard ruler and bottle opener
• DECKED can handle UV light, moisture, and extreme heat or cold
• System can be installed easily and can be removed in about 20 minutes
• Three year limited warranty.
• California Residents: WARNING

Artec Industries Axle Truss Mounts

From $1,099.99

• Made from 1/4 inch and .10 gauge thick mild steel
• Heavy-duty and lightweight
• California Residents: WARNING

Artec Industries Axle Brackets

From $109.99

• Bare steel
• Sold individually
• Universal application
• California Residents: WARNING

Artec Industries Skid Plates

From $1,199.99

• Artec Industries' NEW JK UNDER ARMOR is designed to give your Jeep Wrangler full protection underneath the vehicle. Designed using CAD files directly from the manufacturer, this belly pan skid plate ensures that you have a great fit with factory components. Made from 1/4 inch thick 6061 Aluminum and 3/16 inch Zinc-plated Steel, and CNC cut and formed, the Artec Under Armor Kit offers both a strong and lightweight solution for the heavy Jeep.
• California Residents: WARNING

Artec Industries High Steer Arms

From $296.99

• High steer arms
• Increase overall knuckle and steering strength
• Sold individually
• California Residents: WARNING

Artec Industries Axle Gussets

From $13.74

• Cut from 1/4 inch steel
• Bare steel
• California Residents: WARNING

Artec Industries Inner Fenders

From $274.99

• 2 and 4-door models
• No cutout
• Lightweight 1/16" aluminum construction
• No cutout for OEM shock/coil bracket
• Not compatible with OEM fenders
• Allows use of larger tires
• California Residents: WARNING

Artec Industries Heim Joint Kits and Accessories

From $1,099.99

• Made of 303 stainless steel
• California Residents: WARNING

Artec Nighthawk Rock Guards

From $1,299.99

• Jeep rocker panel provides maximum protection
• Bare steel finish
• Made from 3/16" and 1/8" CNC laser cut and formed steel
• Full Boatside protects down to the frame
• Internally gusseted
• Distributes load to body mounts, side body and pinch seam
• Angular design perfectly matches Artec NightHawk front and rear fenders
• Made in the USA
• California Residents: WARNING

Artec Industries Shock Mounts

From $13.19

• Universal application
• Designed for 2 inch tube
• Made from 3/16 inch steel plate
• 1/2 inch mounting holes
• Sold as a pair
• California Residents: WARNING

DECKED Drawer Dividers

From $20.00

• Our dividers come in a set of four and are made from polypropylene. They are light gray in color to make finding your stuff easier. The dividers are 8 inch tall and fit, into four mounting positions within the DECKED drawers, allowing you to customize the drawers for your gear. Each divider has cut-outs that allow you to secure your gear with handy tie-down points. The dividers can be taken out or re-positioned with ease.
• California Residents: WARNING

Artec Industries Quart Crates

From $175.99

Artec Industries Hydro Steering Mounting Kit

From $241.99

• Ram mounts
• Made from 1/4 inch mild steel
• Clearance to use rotated knuckles and pinions
• California Residents: WARNING

Artec Industries Battery Mounting Kits

From $104.49

• Battery Mounting Kits
• One piece design
• Engineered for lighter weight and added strength
• Battery fits snug, eliminating movement
• No welds to to fatigue and crack over time
• CNC Cut from 10GA. (.130) Cold Roll steel plate
• 1/4" bolts with nylock nuts included
• 1/4" countersunk holes in bottom or direct weld
• California Residents: WARNING

Artec Industries Nighthawk Front Bumpers

From $1,112.77

• Made in the USA from 1/8 inch CNC laser cut and formed steel
• Internally gusseted for ultimate strength
• High clearance design hugs factory frame for no loss of clearance or departure angle
• 3/4 inch thick high strength alloy steel frame brackets double as shackle mounts
• High Clearance ends ensure you don’t get hung up on rocks
• Available in bare steel to allow customizable color coordination
• Contoured to perfectly fit the subtle curves of your Jeep
• California Residents: WARNING

DECKED Truck Bed Organizers

From $30.00

• Built from 100% recycled high density polyethylene co-molded to a steel sub frame (most of the steel is also recycled)
• No drilling needed
• system attaches to the existing tie-downs in your truck
• Precise fit ensures no gaps between the deck and sidewalls of your truck bed
• Drawers are engineered to hold 200 lbs. each while still rolling smoothly
• Oversized cast aluminum handles
• Full bed-length drawers roll smoothly on sealed bearing wheels
• Drawers are weatherproof
• Ammo cans provide four areas of additional storage on either side of the wheel wells
• flip the lids and you have eight beverage holders or a handy place to store nuts, bolts, or screws when working on or near your truck
• Stainless steel edge guard ruler and bottle opener
• DECKED can handle UV light, moisture, and extreme heat or cold
• System can be installed easily and can be removed in about 20 minutes
• Three year limited warranty.
• California Residents: WARNING

DECKED Truck Bed Storage Accessories

From $1,181.99

Artec Industries Fender Flares

From $175.99

Artec Industries Steel Bumper Winch Plate

From $439.99

• The only winch plate compatible with Both the WARN Zeon and Superwinch EXP
• Thick 3/16 inch steel winch plate engineered better than competitors for ultimate strength and less weight
• 16 gauge aluminum front cover featuring stamped Artec A-blade logos
• Allows you to easily preinstall winch on plate prior to installing bumper unlike competitors
• Designed using original OEM 3D files from Jeep, Warn and Superwinch for maximum compatibility and best fitment
• CNC laser cut and CNC bent in-house for precise fit
• Includes hardware for mounting the front face plate
• Includes thick washers for offsetting the bumper forward for any winches that may require it - Not needed for most winches
• Black powder coat for durability
• Direct bolt-in installation
• California Residents: WARNING

Artec Industries 3-Link Kits

From $1,099.99

Artec Misalignment Spacers

From $20.89

Artec Industries Small Trick Tabs

From $21.63

Artec Industries Jig Table and Accessories

From $119.99

Artec Industries Swap Kits

From $571.99