Dana Spicer Dana 44 Front Axle Assemblies

From $1,485.99

• Genuine Spicers gears
• Thick axle tubes for improved strength
• Redesigned and thicker brackets
• Spicer chromoly axle shafts
• Performance differential cover and Spicer performance gasket
• Increased gross axle weight rating
• California Residents: WARNING

Dana Spicer Ball Joint Kits

From $34.99

• Sold In Pairs
• 1 Upper Ball Joint
• 1 Lower Ball Joint
• California Residents: WARNING

Dana Spicer Axle Seals

From $10.99

• Single Seal One Side Only
• California Residents: WARNING

Dana Spicer Ring and Pinion Kits

From $358.99

• Fits most 1996 and earlier standard rotation front and rear axles
• For use with 3.54 and down carrier
• Requires D/S706016X differential bearing kit to complete installation
• Includes pinion bearings
• Includes pinion seal
• Includes pinion shim pack
• Includes pinion preload shim pack or crush sleeve
• Includes pinion nut
• Includes differential shim pack
• Includes ring gear bolts
• Superior Metallurgy ensures more consistent, higher quality gears
• Hobbed and shaved gearing provides optimal mating to minimize stress and maximize life
• Precision heat-treating and shot-peening delivers consistent quality
• California Residents: WARNING

Dana Spicer Dana 30 Axle Shaft Assemblies

From $1,107.99

• Dana Spicer Dana 30 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
• Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
• Spicer Dana 30 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
• Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
• California Residents: WARNING

Dana Spicer Dana 44 Axle Shaft Assemblies

From $118.99

• Dana Spicer Dana 44 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
• Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
• Spicer Dana 44 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
• Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
• California Residents: WARNING

Dana Spicer Steering Knuckle Bearing and Seal Sets

From $63.99

• Kit Includes Lower King Pin Seal
• Lower Bearing Race
• Lower Bearing
• Bearing Cap
• Upper King Pin Seal
• Single Side
• California Residents: WARNING

Dana Spicer Dana 30 Open Differential Internal Kits

From $127.99

• The Dana Spicer Open Differential Internal Kits are forged to ensure greater strength and durability
• Spicer internal gear kits offer a phosphate coating on the cross shaft and a statistically controlled heat treating
• Dana Spicer open differential internal kits replace all of the internal components of your standard open differentials
• These kits will eliminate clunking caused by worn spider gears and tighten up those sloppy differentials
• California Residents: WARNING

Dana Spicer Outer Axle Dust Shields

From $3.99

• The Dana Spicer Outer Axle Dust Shield is for use with Dana Spicer front axles
• The Dana Spicer Outter Axle Dust Shield is used to help prevent dirt and debris from getting to the spindle seals and contaminating the grease which will cause damage to the bearings
• California Residents: WARNING

Dana Spicer Differential Crush Sleeves

From $3.99

• Crush Sleeves
• Maintains Proper Pinion Bearing Preload
• Direct replacement
• For most late model axles equipped with factory crush sleeves
• California Residents: WARNING

Dana Spicer Inner Spindle Nuts

From $17.99

• Dana 60 Spindle Nut
• Inner Nut With Pin
• Services One Side Only
• California Residents: WARNING

Dana Spicer Outer Spindle Nuts

From $12.99

• Dana 60 Spindle Nut
• Inner Nut With Out Pin
• Services One Side Only
• California Residents: WARNING

Dana Spicer Dana 30 Inner Pinion Bearing Baffle

From $1.99

• Dana Spicer Dana 30 Inner Pinion Bearing Baffle is for use in all high pinion Dana 30 Axles
• The Dana 30 Inner Pinion Bearing Baffle installs behind inner pinion bearing race with shim pack
• Inner Pinion Bearing Baffle allows oil to pool to insure lubrication for outer pinion bearing
• California Residents: WARNING

Dana Spicer Dana 60 Locking Ring

From $3.99

• Dana 60 Spindle Nut
• Locking Ring
• Services One Side Only
• California Residents: WARNING

Dana Spicer Dana 30 Stub Axle Slinger

From $3.99

• Dana Spicer Dana 30 Stub Axle Slinger fits all 30 and 35 spline factory and aftermarket stub axles
• The Dana 30 stub axle slinger prevents damage to spindle seals
• The Dana Spicer Dana 30 Stub Axle Slinger is designed to sling mud and muck away from the axle seals
• California Residents: WARNING

Dana Spicer V-Ring Seals

From $6.99

• Large V-Ring Seal
• Dana 30
• Outer
• Face Seal
• Rubber
• California Residents: WARNING

Dana Spicer Axle Disconnect Housing Gasket

From $1.99

• Dana 30 axle with disconnect
• California Residents: WARNING

Dana Spicer Axle Disconnect Shift Forks

From $18.99

• Axle disconnect shift fork
• Fits all Dana 30 and 44 front axles
• California Residents: WARNING

Dana Spicer Dana 30 4.10 Ratio Ring and Pinions

From $311.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications.
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears.
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing.
• California Residents: WARNING

Dana Spicer Dana 30 3.07 Ratio Ring and Pinions

From $911.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
• California Residents: WARNING

Dana Spicer Dana 30 4.56 Ratio Ring and Pinions

From $290.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
• California Residents: WARNING

Dana Spicer Differential Spider Gears

From $448.99