• Community
    • Team 4 Wheel PartsJoin the team and keep up with Greg Adler
    • FacebookAccess exclusive off-road news and giveaways
    • TwitterStay posted on 4 Wheel Parts events
    • YouTubeSee product, installation, and event videos
    • Google+Get the inside scoop on the latest off-roading trends
    • InstagramCheck out exclusive photos
    • Sign Up for Email Offers

Jeep Bumpers & Bumper Accessories

Adding custom bumpers to your Jeep is a great way to accessorize your rig for off-highway use. Aftermarket bumpers provide increased ground clearance and improved approach and departure angles, allowing you to tackle more aggressive terrain. They also provide you with attachment points for other accessories such as winches and auxiliary lighting. Bumpers are a worthwhile investment for any Jeep enthusiast.

  • Smittybilt XRC Armor

    The new line of XRC JK Front Fenders and Rear Corner Guards was specifically engineered to provide the maximum protection and clearance needed when you're pushing your rig through the toughest conditions. Each piece of XRC JK Armor is manufactured out of 3/16" cold rolled steel and then powder coated in Smittybilt's signature series two-stage finish. Each section of XRC JK Armor is designed to be a complete bolt-on installation with stainless steel fasteners and requires minimal modification to the vehicle. The XRC JK Armor comes with an inner fender liner to keep mud, snow, or any other debris out of the engine compartment and wheel wells.

    • Complete bolt-on design with no modifications required
    • 3/16" cold rolled steel - solid platform
    • Stainless steel fasteners - no rust
    • Replaceable slide plates - you'll need them
    • Complete inner liner - to keep mud, dirt, & snow away from engine compartment
    • Provides additional wheel well clearance
    • Cutting edge design
    • Removable side ducts to accommodate a snorkel
    • Two-stage matte black powder coat
  • Smittybilt XRC Front Bumpers

    The Smittybilt XRC Bumper line was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles and raised corners to maximize ground clearance, with 3/16" cold rolled steel bars robotically welded for exact specifications. A two-stage powder coat is then applied for the ultimate look.

    • Manufactured from 3/16" cold roll steel
    • 1.75" 120 wall over rider and kickers
    • Raised corners for better entry and exit under the most extreme conditions
    • Solid plate center section that wraps the frame horns and lower cross member
    • Built-in winch plate to accommodate up to a 10k winch
    • One-piece welded design
    • Two-stage matte black powder coated finish - 5 year limited warranty
  • Smittybilt XRC Stinger Front Bumpers

    Smittybilt is proud to introduce a complete line of front and rear stingers developed and thoroughly tested in the most extreme conditions. The Smittybilt stingers are hand crafted to exacting specifications using DOM 1020 2" tubing, which is one of the strongest materials available. Each stinger base is manufactured out of 3/16" cold rolled steel with reinforced gussets and solid d-ring mounts that are welded on the inside and out for maximum strength. All of the stinger products come in the signature series textured matte black finish and are accompanied with a 5-year limited warranty. When you're looking for the most ground clearance and want a stinger that can withstand the most hostile environments, look to Smittybilt to provide you the very best in stinger technology!

    • Manufactured from 3/16" cold rolled steel
    • 1.75" 120 wall over rider and kickers
    • Raised corners for better entry and exit under the most extreme conditions
    • Solid mount d-rings - welds on the inside and out!
    • Solid plate center section that wraps the frame horns and lower cross member
    • Built-in winch plate to accommodate up to a 10k winch
    • One-piece welded design
    • Two-stage matte black powder coated finish - 5-year limited warranty
  • Smittybilt SRC Front Bumpers

    For the toughest and most durable bumper system ever created, Smittybilt Rock Crawler Series Bumpers deliver heavy-duty equipment designed to withstand off-road use and abuse. Powder coat painted 2" x 0.120" wall tubing protects your front end, and sloping ends allow for greater tire travel with enhanced entry and exit. Available in textured black finish to match the SRC bumper mount tire carrier.

    • The wings and over-rider are manufactured from 2” x .120” tubing
    • Two-point d-rings are one of the strongest mounts in the industry
    • Features two light tabs to hold up to a pair of 9" lights
    • Integrated winch mount holds up to a 10,000 lb. rated line pull winch
    • Two-stage matte black powder coated finish – 5-year limited warranty
  • Smittybilt SRC Classic Front Bumper

    Built from heavy-duty 3/16" steel plating and powder coated for the utmost longevity, the Smittybilt SRC Classic Front Bumper upholds the standard of performance that Smittybilt has long been known for.

    • Center section is manufactured from 3/16" cold rolled steel plating to protect the frame horns and lower cross member
    • Optional two point d-rings are one of the strongest mounts in the industry
    • One-piece welded design
    • Two-stage matte black powder coat finish - 5-year limited warranty
  • Smittybilt XRC Rear Bumper

    Smittybilt XRC Rear Bumpers implement the same technology and advanced engineering as XRC front bumpers, but they also add a tow hitch mount and optional spare tire carrier. For rugged, heavy-duty equipment designed to prepare you for off-road terrain, Smittybilt XRC rear bumpers are the answer you're looking for.

    • Manufactured from 3/16" cold rolled steel
    • 1.75" 120 wall over rider and kickers
    • Raised corners for better entry and exit under the most extreme conditions
    • Solid mount d-rings - welds on the inside and out!
    • Solid plate center section that wraps the frame horns and lower cross member
    • One-piece welded design
    • Two-stage matte black powder coated finish - 5-year limited warranty
  • Smittybilt SRC Rear Bumper

    Smittybilt SRC Rear Bumpers feature a 3/16" solid plate center section to contour around an oversized tire and give you maximum tire clearance when opening and closing your tailgate. Each SRC rear bumper also features a 2" receiver that is incorporated in the bumper and two d-ring mounts. Plus, it bolts directly to your OE points.

    • 3/16" solid plate center section designed to contour around an oversized tire to give you the maximum tire clearance when opening and closing your tailgate
    • Each rear bumper features a 2" receiver hitch that is incorporated into the bumper and bolts directly up to your OE Points, plus the two d-ring mounts!
  • Smittybilt SRC Classic Rear Bumper

    The Smittybilt Classic SRC Rear Bumper is as tough as it is practical, as seen in the 1/4" steel plate design and intuitive mounting system to carry an oversized spare tire. The SRC classic rear bumper is powder coated in our signature textured finish.

    • Zinc undercoated, dual stage textured powder coat for long life
    • Heavy-duty 1/4" steel plate design
    • Heavy-duty latch mechanism keeps your tire secure
    • Custom grease fitting keeps hinge clean and smooth after years of use
    • 3-point tire mounting system supports oversized tires
    • Available with or with out d-rings
    • Class III tow rated
  • OR-FAB Stinger Bumper

    OR-Fab Front Bumpers are built with rock crawling in mind and provide a rugged off-road look to your vehicle. Designed for steep approach angles and protection, you get the best of both worlds. Want to run a winch? OR-Fab has a bumper for your winching needs as well.

    • Wrinkle black finish
    • Offered with centered and offset winch mounts
    • Reinforced 3/4" d-ring brackets
    • Manufactured for 3/16" steel w/ 1/4" steel winch wount plate
    • Stinger hoop is manufactured from .120” walled tubing
  • OR-FAB Sheetmetal Rear Bumper

    OR-Fab Sheet Metal Rear Bumpers are designed to enhance your off road experience by protecting the rear and lower quarter panels of your Jeep from obstacles you will encounter off road. They feature a stylish and rugged sheet metal design with bumper mounting brackets, manufactured from ½" plate and 3/16" plate on outer bumper shell, giving you the quality you expect from OR-Fab. Its tapered sides and bottom slide easily off obstacles, giving you added confidence to tackle the trail.

    • No drilling required
    • Welded on d-ring mounts – includes two d-ring shackles
    • Wrinkle black or optional gloss black powder coated finish for added durability
    • All mounting hardware provided with detailed instructions
  • Fab Fours Jeep JK Stubby Bumper

    The new Fab Fours JK Stubby Bumper has an ultra narrow design to provide maximum tire clearance. This bumper has tapered edges and the Fab Fours "knife edge" design, but is no wider than the grille. The bumper is manufactured out of all 3/16" steel and is fully welded inside and out for superior strength and durability.

    • Stubby design for maximum tire clearance
    • Hi-Lift jack points
    • 3/4" d-ring mounts
    • Winch mount for a 10,000 lb winch or smaller, including the WARN PowerPlant
    • Light cut outs for factory fog lights
    • OPTIONAL - 90mm Fab Fours fog light kit
  • ARB Bull Bar

    Offering increased protection, ARB's traditional style, deluxe front bumpers are air bag compatible and incorporate a sculptured wing design for the best possible fit and appearance. With press formed provision for factory fog lights, the bar also incorporates Hi-Lift jacking points, 2 CB brackets on the center tube, and winch provision.

    • Gloss black powder coat
    • Will accept all full size winches
    • Includes mounting hardware
    • Mounting points for off-road lights and clevis/d-rings
    • Amber driving lights
    • 1 7/8" diameter tubing for fender and grille protection
  • Body Armor Front Bumper

    Body Armor front bumpers feature 2" x 5"enclosed steel tube construction with 3/16" wall thickness designed to stand up to the toughest conditions. Tack on the steering box skid plate, fully welded shackles with d-rings, and a run under bar with 2" receiver and you’ve got a bumper that’s ready to handle just about anything you can throw at it.

    • 2" x 5" 3/16" enclosed steel tube construction
    • Durable textured black powder coat finish
    • Available in different hoop designs and widths
    • Bolt-on installation with no drilling required
    • CJ, TJ, and YJ bumpers come with a steering box skid plate
    • Fully welded shackles with d-rings for dependable recovery points
  • GenRight Stubby Front Bumper

    This is the GenRight Off Road Heavy-Duty Stubby Front Bumper for Jeep Wranglers. It's high quality and high clearance, making it perfect for your favorite trail since it will not get caught on any obstacles while on the tight trails. The low profile winch mount design keeps the winch lower than most other bumpers to allow for better air flow into the radiator.

    • Improves approach angle
    • Compact design fits tight to the frame and wraps around each side
    • Works with Anti Rock-type front sway bars (factory sway bar too)
    • Re-uses the 6 factory mounting bolts (4 on top and 2 on bottom)
    • Formed from heavy-duty 3/16" thick steel plating
    • Includes two 1" thick tow points
  • Warn Rock Crawler Bumpers

    WARN bumpers are designed to accommodate the winches they make. They are engineered specifically for use with WARN winches and are made to withstand the stresses encountered during winching. Plus, WARN bumpers are designed to look great on your vehicle. WARN Rock Crawler Front Bumpers have tapered ends for increased approach angles, welded eyelets to mount d-shackles, and pre-drilled holes to mount lights. WARN Rock Crawler bumpers are laser cut from 3/16 inch steel, then CNC formed and robotically welded for precise fit. These bumpers wear a black powder coated finish for durability and good looks.

    • Tough and durable
    • Tapered ends for increased approach angles
    • Welded eyelets for d-ring shackles
    • Pre-drilled holes for light mounting
  • Bestop Highrock Bumpers

    Developed specifically for the hard core rock crawler, Bestop HighRock 4X4™ Jeep Bumpers feature a high-access design for greater off road clearance. Sturdy winch plate on front bumper accommodates most standard-sized winches. Optional approach roller mounts to front bumper to get over the toughest obstacles.

    Front Bumper | Rear Bumper

    • E-coat undercoating and textured black powder coat finish
    • No-drill installation
    • Rear bumper d-ring attachment points
    • Integrated class 2.5 receiver in rear bumper
    • Built-in winch plate
  • Now Hiring

    4 Wheel Parts is Hiring

    To see all of our current job openings

    Apply Now

  • Email Offers

    Sign up now to receive our latest promotions and exclusive offers.

  • Store Locator

    4 Wheel Parts Store Locator

    91 Stores in North America.
    Locate a store near you.

    Store Locator