Pro Comp Lug Nut Socket Keys

From $8.99

• Pro Comp Replacement Key for Locking Lug Nuts
• California Residents: WARNING

Synergy Manufacturing Skid Plates

From $1,335.00

• Jeep skid plates manufactured from 3/16" crush resistant Grade A-572 Steel plate
• Flush mounted hardware provides a 100% smooth skid surface
• Premium powdercoat finish for maximum corrosion resistance
• Allows access to drain plug without removal
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Jeep Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit

From $275.00

• Front Track Bar & Sector Shaft Brace Kit
• 2 and 4-door models
• Includes SYN8069-01 & SYN8069-02
• Steering Sector Brace
• Track bar brace
• Laser cut and CNC bent from 3/16" high strength steel
• Gray powder coat finish for maximum corrosion resistance
• Bolt on installation
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Heavy-Duty Steering Kit

From $1,050.00

• Requires a minimum of 2 inch front bump stop spacers
• 100% bolt-on
• Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing HD Metal on Metal Tie Rod End Boot

From $10.00

• Tie Rod End Boots
• Made of tear/wear resistant black NBR and come with retaining springs
• Sold Individually
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Weld-On Front Track Bar Brackets

From $175.00

• Weld on design for strength and reliability
• Bracket raises the vehicles suspension roll center
• Bracket moves track bar closer to the axle centerline to clear aftermarket highsteer knuckles/tie rod at full steering lock
• Raising the roll center reduces vehicle body roll and dramatically improves overall handling
• Weld on tab included for mounting factory or aftermarket steering stabilizer up and out of harms way
• Laser cut from 3/16" steel
• California Residents: WARNING

Synergy Manufacturing Front Axle Assurance Kits

From $310.00

• Designed to strengthen the front axle
• Provides a 59% increase in strength over the stock axle tubes
• Inner C Gussets are laser cut and CNC bent in a heavy duty 3-sided construction
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Dana 30/44 Inner C Gusset Kit 2.5 Inch Axle Housing

From $85.00

• CNC Bent For Precision Fit
• Laser cut for tight clearances
• Heavy Duty Three Side Construction
• Requires Welding: Fits All Jeep JK Dana 30/44 Fronts With 2.5 inch Axle Tubes
• Made in the U.S.A
• California Residents: WARNING

Synergy Grab Handles

From $100.00

• Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
• California Residents: WARNING

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Steering Box Brace

From $10.00

• Steering Box Brace
• Laser cut
• CNC bent
• precision welded
• 1/4" Steel
• Black powder coat finish for maximum corrosion resistance
• 100% Bolt-on installation
• No cutting or drilling required
• Make in the USA
• Note: When using an upgraded 09+ Steering Box, 8559-04 is the steering box brace needed, BUT, modifications will need to be made to the upgraded steering box mounts for proper fitment of the brace.
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

Synergy Manufacturing Jeep JK Stabilizer Relocation Kit

From $60.00

• Designed to relocate a Fox/Synergy Suspension steering stabilizer up and out of harms way on a JK
• Includes grade 8 hardware
• Manufactured from high strength 3/16 inch steel
• Powdercoated for corrosion resistance
• Factory clamp cannot be flipped, it will interfere with the diff cover
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Air Compressor Brackets

From $60.00

• Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
• Works with VIAIR 100, 400, & 450 series compressors
• California Residents: WARNING

Synergy Manufacturing Front Upper Control Arms

From $320.00

Synergy Manufacturing 2.0 Inch Air Bump Cans

From $60.00

• Air Bump Mounting Can
• Fits Bilstein, Fox, and SAW 2.0 Air Bumps
• 1026 DOM tubing
• California Residents: WARNING

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Upper Control Arms

From $490.00

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Control Arm Mounts

From $125.00

• Synergy Manufacturing Weld-On HD Front Lower Control Arm Mounts heavy duty 3 sided construction and laser cut/CNC bent from 3/16" high strength steel to provide maximum rigidity
• Brackets comes with additional mounting holes so that the control arms can be mounted 1" higher than stock for additional clearance
• Synergy Manufacturing Weld-On HD Front Lower Control Arm Mounts hole size is 9/16" and a mounting width of 2-5/8
• California Residents: WARNING