A: Yes they’ll work with tire pressure sensors .Genuine packages lug nuts work great on mine, just don’t lose the key.

A: Factory TPMS will work. You will need a narrow spline type lug nuts.

A: Ford F 150 is 6X135 Ram 2500 is 8x165 so no that size won’t fit but check and see if they have your size . Speak to a 4wheel parts associate.

A: Please verify your bolt pattern. Without knowing your submodel, I am showing your truck has 6 lugs? If that is correct, this wheel would not fit. Please call our sales team for further assistance Toll Free: 1-877-474-4821

A: As long as your lug pattern is 8x6.5 should be since it’s 2500

A: If the Chevy center cap is - Center Bore: 5.15 | Push Thru

A: Yes these wheels are the correct bolt pattern for you C20.

A: We're not sure - you will have to verify the center bore and offset. The center bore is 5.150" or 130.81mm. Offset is -6.00mm.

A: 35’s at standard height is a bit too much tire and you will rub your bumper. I have a 4 inch lift, 35 inch tire with these rims on a 1995 f-350 OBS which fits perfectly. At full lock left or right there is a very slight rub on the leaf springs bit it is not enough to cause any wear or issues. 

A: The center caps fit the front but not the rear. The one’s that come with the rims can’t be modified to fit the rear. I’m not sure if 4wheelparts sell one’s that fit. My installer had 2 spares that matched the rims for the rear. 

A: This is not the correct bolt pattern for your Tundra. You need 5 on 150.

A: If you find a wheel with the correct bolt pattern for your vehicle you can go up in wheel size. You will also need to make sure that the new tire size that accommodates your new wheels will also fit on your truck without rubbing.

A: No unfortunately the bolt pattern is not the same. Bolt pattern for a 2005 Ford Excursion looks like it is 8 on 170, this is an 8 on 6.5 wheel.

A: Hello CRO, Yes, this wheel will fit your vehicle application. Thank you for the question.

A: Hello Devin and thank you for your question! Pro Comp Alloy Wheels Series 1069, 18x9 with 8 on 6.5 Bolt Pattern - Polished does come with the center caps. Lug nuts are extra and start at $49.99 depending on the application.

A: Hello Just, Yes, this wheel will fit your vehicle application. It also has the correct backspace. Thank you

A: Hello, the Pro Comp Alloy Wheels Series 1069, 18x9 with 8 on 6.5 Bolt Pattern - Polished are not currently available to fit your Tundra. You will need a wheel with a 5/150 bolt pattern. Thank you for your question.

A: They are just polished raw aluminum. So yes cleaning and polishing them by hand is how you would take care of them.