G2 Axle & Gear Internal Gear Set Kits

From $69.00

• G2 Axle and Gear offers premium replacement internal kits for your differential. These high quality components are a direct fit, and allow you to replace damaged or worn gears without having to replace your entire differential carrier.
• California Residents: WARNING

G2 Wheel Bearing Kits

From $41.99

• G2 Axle and Gear Wheel Bearing Kits provide you with the necessary items to replace your front or rear wheel bearings.
• California Residents: WARNING

G2 Axle & Gear Dana 44 Rear Coil Buckets

From $89.99

• Rear coil buckets for 68-2052-1
• Heavy-duty steel construction
• Unpainted
• Welding-required
• California Residents: WARNING

G2 Axle & Gear U-Joint Full Circle Snap Rings

From $0.80

• Fur Use With 5-760x Series U-Joint
• For Use With Aftermarket Axle Shafts
• Factory Shafts Will Require Machining
• Will WorkWith GM 10 Bolt Axles
• Single Snap Ring Only Qty 4 Required To Install 1 U Joint
• California Residents: WARNING

G2 Axle & Gear Wheel Studs

From $2.99

• These G/2 replacement studs are the same high qualits wheel studs that come in our axle kits.
• California Residents: WARNING

G2 Axle and Gear Retro T-Shirts

From $13.29

• Available in sizes Medium through 3XL
• Gray
• 100% cotton
• Retro design
• California Residents: WARNING

SPOD 8 Circuit Special Edition (SE) Systems

From $190.30

SPOD 6 Switch sPOD Systems

From $191.30

SPOD Switch Panel

From $15.95

G2 Axle & Gear Emergency Brake Cables

From $31.99

• Designed and constructed using quality materials
• Moderate bolt on installation
• Designed to fit left or right side for easy application
• Emergency Brake Cable Kit is the final piece you'll need to complete a G2 Disc Brake Kit
• California Residents: WARNING

G2 Axle & Gear Differential Crush Sleeves

From $5.99

• A Crush Sleeve is designed to maintain pinion preload to keep from burning out your pinion bearings.
• California Residents: WARNING

G2 Ring and Pinions

From $100.00

• G2 Axle & Gear Ring and Pinion
• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

G2 Axle Berfield CV Clip

From $1.79

• For Use With Factory And After Market Axle Shafts
• Retaines Axle Shaft To Berfiels Style CV Joint
• One Clip Only
• California Residents: WARNING

SPOD Adapter Harness for ARB Compressor

From $19.15

• Universal application
• For use with ARB compressor
• Utilizes sPOD switches and source
• Controls the compressor and front and rear lockers
• California Residents: WARNING

SPOD Rocker Switches

From $11.99

• Multiple uses
• This replacement switch will let you know exactly what you are turning on
• It features not only the description but also an image of it functionality
• California Residents: WARNING

G2 Axle and Gear Mini Air Compressor

From $69.00

• Compact size
• Sealed to ensure long service life
• Four ports for solenoid valves
• Multi position mounting bracket with built in cooling fins
• Pressure switch regulated system suited to operate pneumatic lockers
• Complete wiring harness
• California Residents: WARNING

G2 Axle & Gear Tork Inner Front Axles

From $104.00

G2 Axle & Gear Tork Outer Front Axles

From $107.24

G2 Ring Gear Bolts

From $1.50

G2 Axle & Gear Ford 10.5" Ring and Pinion Sets

From $389.99

G2 Axle and Gear 4WD Disconnect Block Off Kits

From $8.40

SPOD Bantam Power Distribution System with Switch Panel

From $940.83

• 8-circuit (expandable) control system
• High current capabilities (30 amps per circuit) with a maximum 100 amp capacity
• Operates on 12VDC or 24VDC
• Small footprint: 4.0”W x 4.0”L x 1.125”T
• Programmable functions for: Dimming, Strobe, Flash and Momentary
• Switch linking (create a master switch to control other switches within the same panel)
• Flexibility to add multiple controller types such as: Touchscreen, HD smart controller, hard rocker switches
• Use the Bantam™ app on a smart phone, tablet or any Bluetooth LE enabled device
• Expandable up to 32 circuits that can be controlled with single touchscreen, or infinite number of circuits
• Ethernet cable interconnect with a 25’ foot distance limitation
• Fully programmable via free Bantam™ app
• Current monitoring (via touchscreen and app)
• Ignition control for two circuits (switches 1 and 2)
• Safety lock-out for two circuits (switches 1 and 2)
• California Residents: WARNING

SPOD BantamX 8-Switch Control Panels

From $1,155.99

• Available with amber, blue, green or red LEDs
• Fully programmable, digital controlled system
• 8 circuits rated at 30 amps at 12.5 VDC per circuit
• 16-position terminal block (easily attach accessories)
• 2 controller ports (RJ45) for Ethernet cables
• Integrated low voltage cutoff (LVCO) battery protection with optional override
• One ATM mini-style fuse for LVCO protection and reset
• Failsafe self-healing fault protection system (from 1.5 to 30amps)
• Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)
• 50amp auto-resetting circuit breaker
• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
• Operates on 12VDC or 24VDC
• 8-position input terminal block for controlling outputs
• Built-in Bluetooth capabilities for remote control
• Protection against: overheating, over-current, shorts, reverse polarity and field collapse
• Ignition control and safety lock-out for switches 1 and 2 (optional)
• Up to 4 BantamX units can be daisy chained and controlled by one Touchscreen
• On-demand wireless software updates/upgrades
• 1-year limited warranty

SPOD SourceLT 6-Switch Control Panels

From $681.99

• Available in amber, blue, red or green LEDs
• 6 circuits rated at 30 amps at 12.5 VDC per circuit
• 12-position terminal block (easily attach accessories)
• Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller
• Integrated low voltage cutoff (LVCO) battery protection with optional override
• Self-healing fault protection circuits (from 1.5 to 30amps)
• Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays)
• 50amp auto-resetting circuit breaker
• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
• Operates on 12VDC
• Built-in Bluetooth capabilities for remote control
• Protection against: overheating, over-current, shorts, reverse polarity and field collapse
• On-demand wireless software updates/upgrades
• 1-year limited warranty