G2 Axle & Gear AMC 20 Ring and Pinion Sets

From $146.99

• AMC 20 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Internal Gear Set Kits

From $69.00

• G2 Axle and Gear offers premium replacement internal kits for your differential. These high quality components are a direct fit, and allow you to replace damaged or worn gears without having to replace your entire differential carrier.
• California Residents: WARNING

G2 Wheel Bearing Kits

From $41.99

• G2 Axle and Gear Wheel Bearing Kits provide you with the necessary items to replace your front or rear wheel bearings.
• California Residents: WARNING

G2 Axle & Gear Dana 44 Rear Coil Buckets

From $89.99

• Rear coil buckets for 68-2052-1
• Heavy-duty steel construction
• Unpainted
• Welding-required
• California Residents: WARNING

G2 Axle & Gear U-Joint Full Circle Snap Rings

From $0.80

• Fur Use With 5-760x Series U-Joint
• For Use With Aftermarket Axle Shafts
• Factory Shafts Will Require Machining
• Will WorkWith GM 10 Bolt Axles
• Single Snap Ring Only Qty 4 Required To Install 1 U Joint
• California Residents: WARNING

G2 Axle & Gear Wheel Studs

From $2.99

• These G/2 replacement studs are the same high qualits wheel studs that come in our axle kits.
• California Residents: WARNING

G2 Axle and Gear Retro T-Shirts

From $13.29

• Available in sizes Medium through 3XL
• Gray
• 100% cotton
• Retro design
• California Residents: WARNING

G2 Axle & Gear Emergency Brake Cables

From $31.99

• Designed and constructed using quality materials
• Moderate bolt on installation
• Designed to fit left or right side for easy application
• Emergency Brake Cable Kit is the final piece you'll need to complete a G2 Disc Brake Kit
• California Residents: WARNING

Extang Solid Fold 2.0 Tool Box Tonneau Covers

From $1,149.99

• Extangs all new folding hard lid tonneau cover. Installs in seconds!! No tools required. Fastest installation and removal of any hard tonneau on the market. Tonneau is completely assembled, no spare parts or tools required. Ultra strong, yet lightweight!
• California Residents: WARNING

G2 Axle & Gear Differential Crush Sleeves

From $5.99

• A Crush Sleeve is designed to maintain pinion preload to keep from burning out your pinion bearings.
• California Residents: WARNING

Extang MaxSeal Tailgate Seal

From $28.99

• MaxSeal Tailgate Seal
• Universal length
• Easy, do-it-yourself installation
• Just peel, cut and stick
• Keeps dust, rain and snow out of your truck bed
• California Residents: WARNING

G2 Ring and Pinions

From $100.00

• G2 Axle & Gear Ring and Pinion
• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

Extang Trifecta Tonneau Cover

From $439.00

• The Trifecta fabric is a traditional heavy-duty commercial grade vinyl. Maximum Strength Warranty. Extang engineered tri-fold style tonneau cover. Fast, easy, no assembly required. No tools. Extang engineered with precision. 45?? steel corner brackets, commercial grade rails and I-Beam style Monster Bows provide unparalleled strength. SafetyKlamps: Extremely strong glass-filled nylon construction, will never break. Secure cab section by hand tightening thread clamps with built-in heavy-duty handle. SpeedKlamps: Rear tail section clamps operate with spring action handle for instant fasten and release. Clamp conveniently stows away inside rail when not in use MaxHinges: Ultra-strong, rugged, double pivot design made of durable glass-filled nylon and feature protective padding. Heavy-duty luggage style Hold-Tite fasteners secure the tonneau in the open position at the cab. Provide quick and easy storage when hauling large cargo.
• California Residents: WARNING

G2 Axle Berfield CV Clip

From $1.79

• For Use With Factory And After Market Axle Shafts
• Retaines Axle Shaft To Berfiels Style CV Joint
• One Clip Only
• California Residents: WARNING

Extang Trifecta Signature Tonneau Cover

From $479.99

• The Trifecta Signature Series with rich looking vinyl-backed black canvas. Maximum Strength Warranty. Extang engineered tri-fold style tonneau cover. Fast, easy, no assembly required. No tools. Extang engineered with precision. 45?? steel corner brackets, commercial grade rails and I-Beam style Monster Bows provide unparalleled strength. SafetyKlamps: Extremely strong glass-filled nylon construction, will never break. Secure cab section by hand tightening thread clamps with built-in heavy-duty handle. SpeedKlamps: Rear tail section clamps operate with spring action handle for instant fasten and release. Clamp conveniently stows away inside rail when not in use MaxHinges: Ultra-strong, rugged, double pivot design made of durable glass-filled nylon and feature protective padding. Heavy-duty luggage style Hold-Tite fasteners secure the tonneau in the open position at the cab. Provide quick and easy storage when hauling large cargo.
• California Residents: WARNING

Extang Tonno Tonic

From $131.94

Extang Cargo Cleats Truck Bed Tie Downs

From $38.99

• Extang Cargo Cleats quickly clamp to most any location on the side of your truck bed
• The Cargo Cleats clamp on for he optimal tie down locations
• No drilling of your truck bed required
• California Residents: WARNING

Extang Trifecta Tool Box Tonneau Cover

From $499.99

• If you sacrifice precious bed space for the security of a truck toolbox, you really care about security. But what about the rest of your gear, the stuff that doesn't fit into that diamond-plate bank vault? In the past, you had to gamble on a bargain-bin blue tarp or one of the few tonneaus made for toolboxes, which weren't much better. But now, you can keep your toolbox, and cover your bed, with the best bet in tonneaus the Extang Trifecta Toolbox Tonneau Cover. Featuring everything that makes the original Trifecta a sure bet, your Trifecta Toolbox cover is assembled and ready to rock right out of the box. With the straightforward design, all you need to do is put it on your bed, tighten the clamps and hit the road - go from uncovered to covered in 3 minutes flat. And, that's with no tools, cutting or drilling needed at all. Along with the easy installation and made-for-toolbox design, your Trifecta tonneau features the legendary look that sets Extang apart. And, that sleek style is for more than just looks, it can also improve your fuel mileage. Ease, style and economy, now that's a Trifecta worth betting on! Best yet, Extang backs your Trifecta Toolbox Tonneau with a Lifetime Warranty on the frame and 10 years on the tarp.
• California Residents: WARNING

Extang Endure ALX Tonneau Covers

From $1,299.99

G2 Axle and Gear Mini Air Compressor

From $69.00

• Compact size
• Sealed to ensure long service life
• Four ports for solenoid valves
• Multi position mounting bracket with built in cooling fins
• Pressure switch regulated system suited to operate pneumatic lockers
• Complete wiring harness
• California Residents: WARNING

G2 Axle & Gear Tork Inner Front Axles

From $104.00

Extang Trifecta 2.0 Tonneau Covers

From $479.99

• Heavy duty leather grain fabric provides clean lines and a low profile appearance
• Extang's clamping system attaches to your truck in seconds for easy installation
• Our Extang Engineered cab clamps attach directly to your bed flanges without damage/alteration to your bed caps
• EZ-Lock Clamps requires minimal effort to operate and self-locks in position when attached to the bed flange for added security

G2 Axle & Gear Tork Outer Front Axles

From $107.24

G2 Ring Gear Bolts

From $1.50