Fab Fours Winch Front Bumper with Full Guard (Black) - TT16-B3650-1

• Fitment: Direct Fit
• Toyota Tacoma
• Provides far more tire clearence
• Winch Ready-Accepts up to 10,000 lb small frame winch
• 7/8" D-Ring mounts
• 2-Piece mounting system with adjustability to allow a "custom" fit
• Fab Fours' signature injection molded light housings
• Fab Fours' 90mm fog and 60mm turn inicator lights are included Free with the Bumper
• 2 Stage Black Powder Coat
• 3/16" Steel Construction
• 220-250 lbs
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Rear Bumper (Black) - TT16-W3651-1

• Fitment: Direct Fit
• Toyota Tacoma
• For bumpers with rear back-up sensors
• 3/16" Steel Construction
• D-Rings are cut with 3/4" steel and will accept up to a 7/8" Shackle
• Retain OEM Receiver Hitch and Wiring Location
• Fab Fours 2 Stage Black Powder Coat
• Weight: 115 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Rear Black Steel Elite Bumper (Black) - FS17-U4150-1

• Fitment: Direct Fit
• Black powder coat
• Combination Pipe and Smooth Plate Construction
• Matte Black Powdercoat or Bare Steel (-B instead of -1)
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the U.S.A.
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Full Guard (Black) - DR19-X4450-1

• Fitment: Direct Fit
• 2 stage black powder coat finish
• 3/16 inch plate steel construction
• With full guard
• Aggressive design
• Provides far more tire clearance
• Lower cutout for increased airflow
• Winch ready for Warn Zeon 12 or lower
• Center mount accommodates a 30 inch light bar (Light bar not included)
• Side mounting slots and tabs for various light options (lights not included)
• Removable light inserts can be painted
• Integrated sensor holes
• Integrated D-ring mounts
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Pre-Runner Guard (Black) - GS19-X3952-1

• Fitment: Direct Fit
• 2 stage black powder coat finish
• 3/16 inch plate steel construction
• Front bumper with pre-runner guard
• Aggressive design
• Winch ready for Warn Zeon 12 or lower
• Center mount accommodates a 30 inch light bar (not included)
• Removable inserts that can be painted
• Provides far more tire clearance
• Lower cutout for increased airflow
• Integrated sensor holes
• Warn Zeon Control Box Relocation is required
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Pre-Runner Guard (Black) - FF18-X4552-1

• Fitment: Direct Fit
• Matrix Series with pre-runner guard
• 2 stage black powder coat finish
• 3/16 inch steel construction
• Provides far more tire clearance
• Slim "High and Tight design
• Perfectly follows the body lines
• Winch ready - accepts up to 12,000 lb or lower winch (recommend Warn ZEON winch)
• Required winch relocation brackets (sold separately)
• Integrated D-ring mounts
• Center mount accommodates a 30 inch light bar (not included)
• Mounting options on each side for (2) 3x3 inch cube lights to give you maximum LED coverage (lights not included)
• Removable light inserts for different color options
• Side mounting slots and tabs for various light options
• Lower cutout for increased airflow
• Accommodates factory 360 camera (minor camera interference with Pre-runner guard)
• Complete bolt-on front bumper with provided brackets that tie directly to the frame
• Weight: 130-180 lbs
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Stubby Front Bumper with Pre-Runner Guard (Black) - JL18-B4752-1

• Fitment: Direct Fit
• 2 Stage black powder coat finish
• 3/16 inch steel construction
• Comes with pre-runner guard
• Narrow stubby design
• Integrated D-rings
• Integrated tow hooks
• Winch ready with included winch tray
• Integrated fog light housing using 3x3 Pod lights or factory fog lights (Not compatible with OE Steel bumper fog lights)
• Easy installation
• Weight 75lbs
• Height 22 inches
• Width 23 inches
• Length 47 inches
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper (Black) - TT22-X5451-1

• Fitment: Direct Fit
• 2 Stage black powder coat
• 3/16" steel plate construction
• Aggressive design
• Winch ready for Warn Zeon 12 or lower
• Control box relocation required to run 30" single row light bar
• Slim "High and Tight" Design
• Perfectly follows the body lines
• Center mount accommodates a 30" light bar (not included) Single row required when running a winch
• Customizable Removable light inserts for different color options
• Side mounting slots and tabs for various light options (lights not included)
• Provides far more tire clearance
• Lower cutout for increased airflow
• Integrated sensor holes
• Integrated D-Ring mounts
• Weight: 165 lbs
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Overland Rack (Black) - JTOR-01-1

• Fitment: Direct Fit
• 2-stage matte black powder coat finish
• Expandable design
• Multiple tie down points
• Multiple mounting points
• 10 integrated pod mounts
• Up to 500lb capacity with the 2 included cross-members
• Ability to create solid floor by purchasing extra cross members
• Integrated roof access step
• Superior strength
• Stainless steel mounting hardware included
• 12 gauge steel construction
• Weight 220 lbs
• Height 27"
• Width 61"
• Length 60"
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Daystar Body Mount Bushings - KF04058BK

• Fitment: Direct Fit
• Black
• Replaces worn factory rubber bushings
• Includes replacement bushings, sleeves and hardware
• Zinc plated steel sleeves and hardware
• Bushings are fluid and road grime resistant
• Made of high quality, durable Polyurethane
• Improves handling and performance
• Lasts up to 3 times longer than rubber
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Series Front Bumper with Pre-Runner Guard (Black) - FB21-X5252-1

• Fitment: Direct Fit
• 21-Current Ford Bronco, 2 & 4 Door
• Matrix Series front bumper with pre-runner guard
• 2 stage matte black powder coat with epoxy primer
• Winch ready for the WARN VR EVO 10 or lower
• Center mount for integrated 20" single row light bar
• Mounting options on each side for (2) 3x3 LED cube lights
• Integrated D-ring mounts: customizable / removable light inserts for different color options
• Provides far greater tire clearance
• Lower cutout to provide increased airflow
• Made from 3/16th steel construction
• Weight: 140 lbs.
• Height: 20"
• Width: 73"
• Depth: 19"
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Front Ranch Bumper in Black Blacked Tread Plate with Tow Hooks (Black) - DR10-S2960-1

• Fitment: Direct Fit
• Black powder coat
• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• Optional Bolt-on Winch Mount (Accepts up to 16,500 lb. winches or smaller)
• Optional Bolt-on 1" D-ring mounts
• Optional Bolt-on 2" Receiver
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Black Steel Replacement Front Bumper with Full Guard (Black) - DR13-K2960-1

• Fitment: Direct Fit
• Black Powder coat
• 14 Gauge Steel Construction
• Optional - Bolt on Winch Mount (12,000 lb. Winches)
• Optional - Bolt on D-Ring Mounts
• Optional - Bolt on 2" Receiver
• Tow Hooks
• Accepts Factory Fog Lights
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Hybrid Front Winch Bumper with High Pre-Runner Guard (Black) - TB16-03-1

• Fitment: Direct Fit
• With high pre-runner guard
• 2 stage matte black powder coat with epoxy primer
• Made from 3/16" steel construction
• Winch ready for the WARN Zeon 10 (Winch not included)
• Center mount for integrated 30inch light bar
• Mounting options on each side for (3) 3X3 LED cube lights
• Light not included
• Integrated D-ring mounts: provides far greater tire clearance
• Weight: 125 lbs.
• Height: 29"
• Width: 75.5"
• Depth: 25"
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Daystar Body Mount Kit - KF04060BK

• Fitment: Direct Fit
• Superior to factory and aftermarket replacement body bushings
• Plated steel bushing sleeves with grade 8 bolts
• Hardware included for standard, extra, and super crew cabs
• Vehicle fluid and road grime resistant
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Stubby Front Bumper with Pre-Runner Guard (Bare) - JL18-B4752-B