Daystars Body Lift Kits are more than just spacer blocks placed on top of factory mounts! Instead, these are complete replacement body mounts with an additional 1 inch of height, which raises the body 1 inch. Daystars body lift kits use a special blend of Polyurethane that is resistant to vehicle fluids and road grime while keeping the body isolated from chassis noise and vibration. These mounts keep the body properly aligned with the frame and include all the necessary hardware for installation. Daystar Body Lifts are perfect for modifications such as high-clearance skid plates (belly-up kits), engine conversions, and applications that need a little more room for larger tires and wheels. Since the body is relocated 1 inch, no other modifications are needed to items such as fuel filler necks, wiring, and the steering sector shaft. Transfer case linkage brackets are included on some applications. Depending on vehicle age it is a good idea to inspect these and other components and replace any items that show evidence of wear or cracking.
The product is self explanatory... I have noticed a smoother ride with the aftermarket bushings.
By Josh from Littleton, CO
I am so far very satisfied with the product. Gave the needed clearance i was looking for and looks great. I did however have a lot of trouble with my filler on the fuel. I had to extend it to fit properly and had to cut the bottom half of the fan shroud. Some of the mounts didn't fit into the stock locations correctly so i had to make them bigger but this was easily accomplished with a file.But overall I'd say it is well worth it.
By its a jeep thing from College Station, TX
Daystar 1" BL
Awesome bl. Rides smooth. Easy install
By Merle from Wilmington, NC
Easy Installation, quality product.
This lift kit took less than 2 hours to install. One warning should be added to the instructions; when you lift the drivers side watch carefully for contact between the power steering reservoir and the windshield washer fluid container. The kit contains everything you need and the parts are well made.
By havasued from Lake Havasu City
great product just what i wanted
By Ross from Waldoboro , Me.
Extremly satisfied with the install and difference in ride.
By Otm Tex from San Antonio, TX
I bought this body lift to clear bigger tires. I like the material supplied. It is softer than nylon blocks. The kit had everything, but the installation instructions did not show the front body mount and did not instruct me to remove the gas filler trim. I think it is much easier to install with this information and a few more photos of which blocks go where and what hardware to use. We figured it out though and I am happy with the product.
By Catamount Recreation Management from Colchester, Vermont
Good product to replace worn out OEM mounts. Gives just enough clearance to stop tire rubbing on the trail with 33 X 12.50 with a 3.5 inch Rubicon lift on a TJ.
By wr450 from Yakima Wa
Great lift replaced busted body mounts.
I used this along with the motor mount lift to install a belly up skid plate. This was the first time I had ever installed a lift and completed it by myself in one afternoon.
By Rubber Ducky from Jacksonville, Fl
I would buy this product again.
Use body lift to make room for 35in tires on my Jeep. Instructions where easy to follow. Very easy install.
Does this lift come in RED?
2004 Jeep TJ Rubicon - 6
Bruce from El Paso, Tx on
The Daystar 1 Inch Body Lift DAYKJ04508BK only comes in black. Thank you.
from El Paso, Tx on
Do I need to use the stock steel inserts with this installation?
John from Ohio on
No, Daystar provides all new insets with this kit. Please click on the installation tab on product page for more details. Thank you.
from Ohio on
Does this product replace the stock body mounts?
Thank You for you time
Mike from on
Yes they are 1 inch taller body mounts. This way you are not sticking a spacer on the stock body mount. They hold up very well I put the same kit on my son's 2003 TJ worked great.
Driven by design, Daystar has been designing and producing premium 4x4 components for nearly 40 years. Primary products for Jeeps include lift and leveling kits, dash panels and hood accessories and Daystar manufactures parts and accessories for Wranglers, Cherokees and Liberties. When factory parts are not up to par, upgrade to Daystar's line of unrivaled, ISO-certified plastic products for a variety of applications. We carry switches, isolators, bump stops and more so improve performance on the trail and for your everyday driving. When you've got the guts to go off-road, Daystar products help make your ride a revelation with unrivaled products. Shop Daystar Now