Bilstein 9100 Series Shocks

From $1,028.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Rock Crawler Series

From $398.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein B4 OE Replacement Air Springs

From $1,057.00

• Air Spring with Monotube Shock Absorber
• California Residents: WARNING

Bilstein OE Replacement DampTronic Series Shock Absorber

From $216.00

• Electronic adjustment system developed specifically for each application
• Adjustable setting levels for the most dynamic driving experience
• Ability to switch instantly between settings to suit driving conditions
• Threaded body adjustable range of 20mm at both axles, while installed
• Lowering of approx. 30-50 mm at front and rear
• Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
• Spring plates and lock nuts made from a special aluminium alloy
• Surface coating using Triple-C-Technology® for long-lasting corrosion resistance
• Round threads for easy adjustment
• Quality sport springs made from highly durable material
• Gas pressure technology
• BILSTEIN monotube technology, made in Germany
• California Residents: WARNING

Bilstein B4 OE Replacement Strut Assembly

From $103.00

Bilstein Monotube Strut Inserts

From $69.00

• Heavy Duty Strut Cartridge
• Bilstein 4600 series
• Body Diameter:2 in
• Type:strut cartridge
• Finish:white
• Reservoir:no
• Boots included: no
• California Residents: WARNING

Bilstein 9300 Series Shocks

From $880.99

• For coilover:
• Comes with ¾” teflon uniball with machined aluminum eye ring
• Hose length and fittings options: straight, 90 degree, 45 degree
• Completely owner tunable and rebuildable
• Widest range of tuning combinations within the industry
• Included spring hardware for dual-rate 3” ID springs
• Hi-flow independent rebound and compression bypass adjusters For Black Hawk
• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 ½ inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable
• California Residents: WARNING

Bilstein 9200 Series Bypass Shock Absorbers

From $1,037.00

Bilstein B8 5112 Suspension Leveling Kits

From $446.00

• Provides 2"-2.75" of lift depending on application
• Kit includes (2) front B8 5100 shocks and (2) custom tuned springs
• 46mm monotube shock design for consistent fade-free performance
• Patented digressive shock valving instantly reacts to changing surface conditions for maximum comfort, and control on and off-road
• Vehicle specific tuning optimizes performance for ride and handling
• OEM certified shock mounting hardware allows for easy installation
• Zinc plated shocks for resistance to harsh elements
• Made in the USA
• Limited Lifetime Warranty
• California Residents: WARNING

Bilstein B8 6112 Suspension Leveling Kits

From $495.00

Bilstein B6 Series HD Suspension Strut Assembly

From $105.00

• Monotube gas pressure construction
• Improved safety and sportiness
• Added traction and enhanced stability
• Increased durability and performance while maintaining ride comfort
• Road-tested and fine-tuned by BILSTEIN for each vehicle specific application
• California Residents: WARNING

Bilstein B8 5162 Suspension Leveling Kits

From $644.00

• Bilsteins 46mm monotube design ensures consistent, fade-free performance in all conditions
• Kit includes (2) B8 5160 shocks and (2) matched springs
• Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
• OEM certified mounting hardware allows for easy installation
• Zinc plated for resistance against harsh elements
• Made in the USA
• Limited lifetime warranty
• California Residents: WARNING

Weigh Safe Replacement Drawbars

From $110.00

• Weigh Safe replacement drawbars
• Available with 4, 6, 8 and 10 inch drop lengths
• Available in 2, 2.5 and 3 inch shaft sizes
• California Residents: WARNING

Bilstein B6 Performance Shock Absorber

From $105.00

• B6 Performance Shock Absorber Monotube Gas Pressure Construction
• Improved Ride And Handling
• Added Traction And Enhanced Stability
• Increased Performance
• California Residents: WARNING

Weigh Safe Weight Distribution Bracket and Hardware Sets

From $191.99

• Brackets & Hardware needed for True Tow Weight Distribution Hitch
• Read desription as sets in future may come complete with brackets and hardware, only brackets, only hardware
• California Residents: WARNING

Weigh Safe Weight Distribution Spring Arms

From $160.00

• For different sized shafts
• These often come as 1 (single) bar, or set of 2
• For Weigh Safe True Tow Weight Distribution Hitches
• California Residents: WARNING

Bilstein B1 OE Replacement Strut Mounts

From $124.00

Weigh Safe Slider Racks

From $109.99

Weigh Safe Adjustable Ball Mounts with Lock Sets

From $289.00

• Includes 4 piece keyed-alike master lock set: Keyed Alike Dual Pin Adjustor Lock, Stainless Steel Receiver Pin Lock, Stainless Steel Anti-Theft Coupler Lock & PadLock
• This adjustable trailer ball mount has everything you need
• Drawbar which function both in the drop and rise position
• Heavy Duty Billet Adjustable Slider
• 2-5/16"x2" stainless steel Combo Ball
• Ball retaining pin
• Dust lock cover
• 1 Year limited ball mount warranty

Weigh Safe Coupler Latch Locks

From $20.00

• Premium materials
• Proven durability
• California Residents: WARNING

Weigh Safe Padlocks

From $10.00

• Made from strong and durable materials
• Make sure items are safe and secure with Weigh Safe padlocks
• California Residents: WARNING

Weigh Safe Hitches Multi Lock Sets

From $50.00

• Multiple lock styles and combos to make sure you secure your hitch/trailer
• Durable designs
• California Residents: WARNING

Bilstein 7100 Classic Coilover Series Shock Absorber

From $134.00

• Monotube gas pressure construction
• Threaded body lengths to 10 inchs of travel
• Self-adjusting deflecting disc valving
• 2 inch diameter shock body
• High-flow piston reduces harshness
• Factory rebuildable
• Spherical bearing end loops, which accept 1/2 inch and 12mm mounting bolts
• Available for standard and coilover applications, this series is primarily designed for vehicles with modified shock mounts and Type I VW suspension
• California Residents: WARNING

Bilstein M Series Shock Absorbers

From $99.99

• Sealed Unit Consistent Fade-Free Performance
• California Residents: WARNING