RockJock 4x4 JL/JT Currectlync Steering System - RJ-442100-101

• Fitment: Direct Fit
• Jeep Wrangler JL 2 & 4-door
• Jeep Gladiator JT
• 45mm (1.65") alloy steel tie rod
• 1.3" diameter solid forged steel drag link
• Heavy duty greasable rod ends for increased strength and long service life
• Double adjusters on both rods simplifies alignment (eliminates the need to remove ends of the rods to adjust, or stabilizer or ram to adjust tie rod)
• Includes relocation solutions for both ends of factory stabilizer shock
• Compatible with ram assist steering
• Designed for stock height or up to 6" lifted vehicles
• Works with any size tire
• 2-year warranty
• Includes all required hardware & step-by-step instructions
• Notes: requires 2" bump stops over stock
• When using ram assist, be mindful of tube size when purchasing ram assist bracket
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Steering System - JK-9704

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• 1.5" diameter heavy-wall tie rod tube with indexed ends for superior strength
• 1-ton greaseable rod ends for increased strength and long service life
• Double toe adjuster simplifies alignment (eliminates the need to remove stabilizer or ram)
• Designed for stock height or lifted vehicles
• Compatible with standard or ram assist steering
• Works with any size tire
• 1-year unconditional warranty
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock 4x4 Antirock Rear Sway Bar Kit - RJ-256200-103

• 20-Current Gladiator JT
• Sway Bar Torsion Bar (1 1/8 in. diameter)
• Fabricated steel frame brackets (pair)
• Fabricated steel axle brackets (pair)
• Forged chromoly sway bar arms (pair)
• Double sheer end link bracket kit
• Adjustable Sway Bar End Links (pair)
• (2) Delrin sway bar bushings (large ID for 28 spline bar)
• All Required Hardware and step-by-step instructions
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock 4" Lift Kit Front Coil Springs - CE-9132FP

• Fitment: Direct Fit
• 4" front coil springs
• Dual rate springs
• Combined rate of 70lbs. and a free length of 22.6"
• Gloss black powder coated finish
• Sold as a pair
• California Residents: WARNING
+ View More Specs - View Less Specs

Dynomax Cat Back Exhaust System - 17340

• Fitment: Direct Fit
• 4.0L 6 cylinder engine
• Aluminized tubing and muffler
• Limited lifetime warranty
• California Residents: WARNING

Dynomax Exhaust Systems - 17363

• Fitment: Direct Fit
• Type Of System: Cat-Back Exhaust System
• Retains Catalytic Converter: Yes
• Type Of Material: Aluminized Steel
• Outlet Type: Dual
• Exit Location: Split Rear
• Exhaust Tip: Stainless Steel
• Muffler Included: Yes
• Muffler Type: Turbo Style
• Muffler Material: Aluminized Steel
• State Legal: 50 State CARB Approved
• Mounting: Includes New Hangers
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud - CE-9114

• Fitment: Universal Fit
• 2 1/2 inch Forged Johnny Joint W/ 1 1/4 inch Rh Threaded Stud
• Universal Fit
• 2 1/2 inch Outside Diameter Joint
• 2.625 inch Mounting Width
• 9/16 inch Thru-Bolt Hole Size
• Urethane Bushings
• Forged Steel Construction
• Features 1 1/4 inch-12 Rh Threads
• Externally Greased Via Zerk Fitting
• Fully Rebuildable
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Heavy-Duty Steering System with Flipped Drag Link - JK-9704P

• Fitment: Direct Fit
• 42mm (1.65") diameter alloy steel tie rod tube with indexed ends for superior strength
• 1.3" diameter solid forged steel “flipped configuration” drag link
• Heavy duty greaseable rod ends for increased strength and long service life
• Double toe adjuster simplifies alignment (eliminates the need to remove stabilizer or ram to adjust)
• Includes stabilizer shock relocation bracket kit
• Compatible with ram assist steering
• Designed for stock height or up to 6" lifted vehicles
• Works with any size tire
• 2-year warranty
• When using with ram assist, be mindful of tube size when purchasing ram bracket
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Antirock Front Sway Bar System - CE-9900JKF

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Steel arms
• Aluminum frame mount bracket
• Front sway bar
• Increases traction and balance
• SAE 4130 heat treated steel
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Tie Rod Kit - JK-9704TR

• Fitment: Direct Fit
• Tie Rod Kit
• California Residents: WARNING

RockJock 2 Inch Forged Johnny Joint with 3/4 Inch RH Threaded Stud - CE-9112SP

• Fitment: Universal Fit
• 2 inch Forged Johnny Joint W/ 3/4 inch RH Threaded Stud
• Universal Fit
• Urethane Bushings
• Forged Steel Construction
• Externally Greased Via Zerk Fi
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock 4 Inch Lift Kit Rear Coil Springs - CE-9131RH3P

• Fitment: Direct Fit
• Gloss black powder coat finish
• Sold as a pair
• California Residents: WARNING

RockJock 4x4 Steering Stabilizer Shock Bracket Kit - RJ-441108-101

• Fitment: Direct Fit
• Jeep Wrangler JL & Gladiator JT
• Fits RockJock Currectlync tie rods
• Also fits other 40 & 42mm tie rods
• Factory stabilizer shock only
• Laser cut and formed 1/4" steel bracket
• Clear zinc plate finish
• Includes necessary hardware and instructions
• Notes: In JL & JT applications, usage of this bracket will require you to relocate the other end of the stabilizer shock as well
• This bracket accepts stock JL & JT shocks (1.5" wide mounting width)
• Other styles of shocks will require a spacer
• For use with traditional style stabilizer shocks only not for use with ram assist!
• This is the bracket that is included in our RJ-442100-101 JL/JT Currectlync Steering System
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Machined Johnny Joint - CE-9112M2

• Fitment: Universal Fit
• Body Type: OEM fitment
• Body Series: 2.0 inch OD, standard body
• Mount Width: 2.000 inches
• Hole Diameter: .500 inch (1/2)
• Misalignment: 22° Total
• Lubrication Method: Internal, through ball center
• Greasable Bolt: 1/2 x 3 1/2 inch, 20 TPI
• California Residents: WARNING
+ View More Specs - View Less Specs

Dynomax Cat Back Exhaust System - 17403

• Fitment: Direct Fit
• 4.0L 6 cylinder and 5.2L 8 cylinder engine
• Aluminized tubing and muffler
• Limited lifetime warranty
• California Residents: WARNING

RockJock Antirock Sway Bar End Links with Heims (14" Rods) - CE-99002RD2