Weld on spring pad for 2 inch wide springs. Includes one individual spring perch. Our spring perches have unique features like 1/4 inch steel construction, 6 inch contact area with spring, and multiple center pin holes for easy wheelbase adjustments. These are not the cheapest pads on the market but they are definitely the best. Unique offset pads make welding against the front differential a snap. Taller profile helps to create clearance for steering under spring but not suitable for spring-under applications.
Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
Synergy Manufacturing Radius Axle Link Bracket For 3.0 inch Dia. Tube
Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
The link brackets are laser cut and CNC bent from 1/4" carbon steel
The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
When installing lifted rear leaf springs, it's best to rotate the pinion so it points directly at the rear transfer case output flange and use a CV style drive shaft. The best way to rotate the pinion is to cut off the old perches and weld in a new set at the proper angle. Normally the spring pin is installed in the center hole but you can also move the rear axle forward or backward 1 inch by using the optional holes. Made from 1/4 plate steel. Unpainted finish.
Trail Gear Trail-Link Three 3-Link Parts Axle Bracket
Built out of 3/16 inch Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brakets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system.
The BTF Trick Tab with 1/4 Hole was designed to mount objects to round tube. They can be used to mount body panels, radiator catch cans, and much more. The trick tabs measure 1 inch from the mounting base to the center of the bolt hole and are approximately 2 inch wide. They are stamped from 1/8 inch steel plate. Look around in our projects section for examples of their use.