Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure Forged from 8620 tool steel, these arms are incredibly strong. All mounting surfaces are machined including the split washer surface and the tie rod tapered holes, ensuring correct and positive contact between parts, preventing knuckle studs and tie rod ends from coming loose. Arms are angle compensated so that the rod ends ride at the factory designed 90 degree angle.
Trail-Gear Magnum knuckle studs are stronger than any other stock replacement Toyota knuckle stud on the market. These heavy-duty studs are manufactured to our specifications by world-renowned bolt manufacturer ARP (Automotive Race Products). Each stud is made from super tough, ARP 2000 material and is hardened to 220,000 PSI. Magnum studs are .250in. longer than stock to accommodate all aftermarket steering arms. Each stud features an integrated 8mm hex head for easy removal with common tools you probably already carry in your tool bag. Don?t let knuckle stud failure ruin your day, get the best, Trail-Gear Magnum knuckle studs
These replacement boots are made to fit Trail-Gear FJ 80 TRE, and many other popular tie rod ends. These boots are made from a special compound of UV resistant NBR (Naturally Blended Rubber) and are a direct replacement for our hi-steer TRE?s. Installation is a snap, all that is required is some grease and a pair of snap ring pliers.
Trail Gear's Steering Ram Clevis End Kit is one of the most complete kits on the market. All necessary hardware is included along with the necessary spacers. The Clevis ends are clear zinc-plated for a sharp look and long lasting finish. This kit will fit most large double endedsteering rams and 3/4in. single ended rams. This design works best with Heim-style rod ends with a 3/4in. bolt hole
If you're running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing a oil cooler in front of the radiator is the best way to prevent this over heating. Our cooler features a fin area of 9 inch X 8 inch and does a great job of keeping the steering fluid temps under control in all conditions. Mounting kit is included with the oil cooler.
Our Rock Assault? Reservoir Bracket bolts right to the back of our Rock Assault? Reservoir and allows you to either weld the other side of the bracket to your cage (coped for 1 1/2? tubing) or simply butt weld it to a piece of flat stock. This kit makes mounting our Rock Assault? Reservoir easy and efficient. The Rock Assault? Reservoir Bracket is made from 1/8? steel plate that is CNC laser cut and then CNC precision bent.
Trail-Gear offers TC style power steering pump pulleys for both serpentine and v-belt style belts. All pulleys are precision CNC machined from 6061 T6 Aluminum and anodized red for a sharp look that will last for years to come. The center hole bore diameter is .660 inch and the total outside diameter of the pulley is 4 3/4 inch.
When assembling your spindles gaskets does it feel like your all thumbs? This kit contains 16 studs and flanged nuts. With the studs installed it's easier to install the spindle gaskets. Gaskets are placed on the studs one at a time, then nuts are installed on the assembly