Power Running Boards | Dual Electric Motor | 4 Door | Ford Bronco 4WD (21-24) (PSR51330)

Was quoted ridiculous prices from multiple sources for a provide and install for power running boards for our 2023 4Dr Bronco. I decided that my best option would be to take a chance and install myself as I consider myself fairly handy, but by no means am I a mechanic or overly familiar with vehicle components. Because these boards had decent reviews, and the price overall was too good to pass, I took a chance on these. So glad I did. I would agree with others that the instructions are not great, especially when you get to the wiring harness install and routing. The boards mounted extremely easily with the bolts supplied. The wiring harness needs to be routed above the frame so as to avoid having anything exposed on the underside., but by looking at a few you-tube videos and google, I was able to get everything routed and installed with the quick connects. Just plan to have more zip ties to tuck everything up nice and neat. Connection to the battery was fairly strait forward once you get the power leads routed up to the battery area. The most difficult part and where I stumbled was with the magnet locations as they trigger the door sensors to raise and lower the boards. One thing to know as nothing was working for me at the start. After a quick call to customer care.....open all the doors, close all the doors once everything is installed and powered. Let the system recognize everything and within a 15 - 20 seconds, and then after opening a door, the sensors started working properly. I guess it just takes a second for the system to configure. So far I've had this installed for 3 months with no issues. Looks great, and can't be more pleased with this purchase.

As many reviews have stated , the instructions need a little help.I installed these on my 2-door Bronco in about 4 hrs. This was casually working along with a couple""beverage"" breaks here and there. I'm happy I reviewed the instructions about 4 times. Between that and a couple of on-line vids , I was able to get a pretty good understanding of how to install everything. I'd say the wiring harness was the most time consuming component to install. I knew what needed to go where but the routing was the time consumer. From there , everything went very smooth , with no issues. The sensors were the easiest thing to do. Just use blue tape on the door sensor when trying to align the magnet location. You can easily move it around while trying to align it. It took me about 5 mins per door. Some reviews say it took ""hours"" ??All components seem to be built really well.Looks and works amazing!So much easier getting in and out .I've had other brands of these and would consider these to be very comparable to some of the more popular brands...would recommend these for sure.Again...reading the instructions multiple times and understanding them , was a huge time saver for me.Most reviews say its taking them 6 hrs plus. I can easily see how it would take someone that long if they just cracked the box open and started installing.

I am very happy with the steps. The mechanical installation is simple and straight forward. The wiring could be that way too, but... the instructions leave a lot to be desired.All they needed to tell you is that only 3 of the ""wires"" from the wiring harness need to go inside the vehicle. The brown, white and on off switch. Also, there are 2 nuts that hold the driver's kick panel (under the dead pedal) that must be removed to get it out. The door magnet connections essentially go under the entry kick plates and connect to the brown and white wires.Overall GREAT PRODUCT!

These look great, are the perfect height to help my kids get into and out of my Bronco, and they really tuck in tight when the doors close. I'm only giving them 4 stars because the wiring portion and the door sensors were a pain. Took me and my dad about 5 hours total to install them.