Need help finding parts? Question on fitment? We can help!

Give us a call 877-474-4821 or send us a message

399.99399.991
Hydraulic 12v Ind (101255)
Vehicle Mounted Industrial Winch Hydraulic 12 Volt 12000 Pound Line Pull Capacity Without Wire Without Fairlead Planetary Gear Drive Requires Winch Carrier or Winch Mount Additional Information Warn Industries is the world's most recognized brand in off-road products such as hub locks and vehicle recovery winches. The company designs, ...
Warn4.6258Indust Winch Hydraulic 12v 12k Lb Cap

Warn

Hydraulic 12v Ind (101255)

$399.99

Select Your Vehicle
true
Specifications
Color
Black
Compatibility
Zeon/ Zeon Platinum/ VR/ M8/ XD9 Winches
Dimensions (L/W/H)
36 / 12 / 9
Weight
38 lbs
Description

Vehicle Mounted Industrial Winch Hydraulic 12 Volt 12000 Pound Line Pull Capacity Without Wire Without Fairlead Planetary Gear Drive Requires Winch Carrier or Winch Mount

Additional Information
Warn Industries is the world's most recognized brand in off-road products such as hub locks and vehicle recovery winches. The company designs, manufactures and markets a full line of off-road equipment and accessories that enhance the performance of four-wheel-drive and powersports vehicles.
DONATE $1 TO KEEP TRAILS OPEN
Customer Reviews
Share your thoughts with other customers
Login to leave a review
Top Reviews
Good product
by Valued Customer on December 02, 2022
 
 
 
 
 
Verified Purchase

I ended up getting it right on the third purchase as I misread descriptions one more than one instance. That what I get for being an old fart!

Was this review helpful to you? yes no
Easy installation - impressed with the quality
by Valued Customer on March 17, 2022
 
 
 
 
 
Verified Purchase

Easy install

Was this review helpful to you? yes no
Extremely satisfied with the durability and fit
by Valued Customer on July 07, 2022
 
 
 
 
 
Verified Purchase

This is so strong, I would say that it reinforces the Jeep ladder frame - in the front! It's going to take a lot more than winching a Jeep to bend this thing; it's at least 1/4"" thick. To my delight, I mounted a HF Badlands 12,000 pound winch with a good 1/4"" clearance to the Warn mounting plate (in the front); it fit PERFECTLY! ... yielding on 'happy camper' !

Was this review helpful to you? yes no
Great solution for mounting a winch!
by Valued Customer on January 19, 2023
 
 
 
 
 
Verified Purchase

Exactly what I needed to mount a winch on my Rubicon with factory bumper.

Was this review helpful to you? yes no
Installation issues and inadequate hardware for kit
by Valued Customer on August 13, 2023
 
 
 
 
 
Verified Purchase

This kit had a few problems that required a few trips to the hardware store to fully install. The bolts that held my skid plate brackets to the frame were too short too catch any threads with the provided L brackets stacked on them and Warn did not provide any longer ones. Also, since the fairlead needs to go through a plate in front of the bumper, the bumper and also the mounting bracket the standard supplied fairlead bolts provided with my Warn EVO 12 did no fit either as they were too short.

Was this review helpful to you? yes no
Positive experience with exceptional customer service!
by Valued Customer on April 14, 2022
 
 
 
 
 
Verified Purchase

Great product and backed by fantastic customer service!

Was this review helpful to you? yes no
Slight Issues but Overall Satisfied with Purchase
by Valued Customer on April 24, 2022
 
 
 
 
 
Verified Purchase

Everything fit well with a WARN VS EVO 12-S winch. Only two things gave me slight pause:1) One bracket's mounting bolt heads came very close to the sway bar release mechanism but I think it'll work, 2) The bolts which hold the fairlead in place were a bit too short to get the nut started. I made a trip to get longer (hardened & black instead of gray/silver) bolts. If you can draw up the layers of brackets and fairlead the bolts provided are plenty long enough. In my situation I couldn't draw them up.Pay attention to the mounting instructions in special regard to the fog light wiring harness and drop the wire down out of the way. (It could have been the reason I couldn't get the bolts started. :)It took 4 hours at a no hurry pace and that includes wiring, a half hour trip to get the bolts and taking the bumper back off to get the fog light wire out of the way.

Was this review helpful to you? yes no
Smooth installation process with helpful tips
by Valued Customer on June 17, 2023
 
 
 
 
 
Verified Purchase

This is a sturdy mount, well built and packagedl. With this winch plate, I mounted a HF Badlands Apex 12k winch on my Gladiator, with no problems. For my application, I had to buy longer bolts for the fairlead, I went with a 55mm length from Fastenal.Installation Tips for a Jeep Gladiator:- You will need to lengthen the two holes at the rear of the skid plate. Slot these two holes going towards the rear of the vehicle by approximately 3/8"". Do this first.- Do the ""Jeep grill mod"" once you have the bumper off, before installing anything. Consists of removing the grill (very easy, check YouTube), removing the 4 bottom inner retainer clips, but leaving the two outer clips on the bottom of the grill. This allows you to remove the grill in the future without removing the winch. Pop each side out, pull up to remove after the mod.- Leave the grill off until the winch is installed, this prevents scratching it up and allows easier routing of the wiring. It's easy to install once the winch is mounted.- For the Badlands Apex winch, move the positive winch wire that comes out the side of the winch towards the grill. Drill a 3/4"" hole in the ""electrical box"" on the left-hand side, above the motor connections. Re-route the positive lead to come straight out the left-hand side of the winch. Google Apex winch wiring mod. It's not hard to do. The positive cable will press up against the grill if you don't do this. The electrical box is not waterproof anyway.- There are two brackets on the winch plate that get installed to the Gladiator frame, leave all the bolts loose until after the bumper is fully tightened, before the winch is bolted to the Warn plate.- Use a piece of tape to hold the (4) mounting nuts at the bottom of the winch, these are the winch to Warn plate bolts. Do not bolt the winch down to the Warn plate until the bumper retaining buts are ALL completely tightened. This allows you to move the winch from side to side so you can access the hard to reach inner bumper mounting nuts.- Once the bumper is properly fastened, then you can tighten down the fairlead bolts, and then the winch plate bracket bolts.- There is a spot next to the battery that you can mount the switch that comes with the Apex winch. A sturdy piece of aluminum works well. Remove the factory bolt for the fender on the edge, there is another threaded hole approximately 3-4"" towards the front of the vehicle. Obtain a bolt to use, mount your bracket for the switch here.Overall, the installation took me 3 hours, it was not bad at all. Everything lined up nicely. Since I did the above steps before starting it went quickly. Concerning mounting the winch to the Warn plate, The tape holds the nuts, but they will move a little, use a small piece of stiff wire to ""align"" the nuts with the holes in the winch plate.

Was this review helpful to you? yes no
See more reviews
Return Policy

RETURNS & EXCHANGES

All returns must be accompanied by an original or copy of the receipt within 30 days. There are no refunds/credits after 30 days. Electrical items, tools, installed parts, and some special order items are non-refundable/non-returnable.

All items returned are subject to a minimum 15% restock fee unless other arrangements were made at the time of purchase.

Shipping charges will not be refunded unless item was received damaged or defective, or an error was made on our part when processing your order. Please contact us for any further questions on non-returnable items.

In order to return any products you must contact our customer service at 1-800-341-7757 and obtain an RGA number and write it large and clear on the box being returned. Also care must be taken by you the customer to pack the returned merchandise carefully so that it does not get damaged when sent back to us. Off Road Warehouse is not responsible for any damage that occurs during shipment back to us and the product will become non-returnable if it becomes damaged during the return shipment.

DAMAGED OR DEFECTIVE MERCHANDISE

Any customer that receives damaged or defective merchandise should contact Off Road Warehouse immediately and at the latest within 30 days of the Invoice/Purchase date.

Please contact the Customer Service line at 1-800-341-7757 for more information on returning the merchandise to us and how long it will take to receive a replacement.

Off Road Warehouse does its best to make sure that all merchandise is free of defects and is shipped safely but accidents in shipping and transportation as well as manufacturing defects do happen. We will be happy to help you out and get you new merchandise as quickly as possible.

Order Cancelations

Order Cancelations are not guaranteed. Orders are processed once they are received, In some cases these are with third party vendors and manufactors. We will do everything in our power to stop an Order already in motion but sometimes we are unable to do so.

If you request a cancellation, we will confirm the order is canceled prior to issuing a refund. If your order is not able to be canceled, you must follow the Return Policy Guidelines outlined above.

Application List
ImageApplicationDetailStockPriceAdd to Cart
 Jeep Gladiator (2020-2021)3.6 V6 GAS FI 3604ccIn Stock$399.99BUY
+ -
 Jeep Gladiator (2021)3.0 V6 DIESEL FI 2987ccIn Stock$399.99BUY
+ -
 Jeep Wrangler (2018-2020)2.0 L4 MILD HYBRID EV-GAS (MHEV) FI 1997ccIn Stock$399.99BUY
+ -
 Jeep Wrangler (2018-2021)3.6 V6 GAS FI 3604ccIn Stock$399.99BUY
+ -
 Jeep Wrangler (2019-2021)2.0 L4 GAS FI 1997ccIn Stock$399.99BUY
+ -
 Jeep Wrangler (2020-2021)3.6 V6 MILD HYBRID EV-GAS (MHEV) FI 3604ccIn Stock$399.99BUY
+ -
 Jeep Wrangler (2020-2021)3.0 V6 DIESEL FI 2987ccIn Stock$399.99BUY
+ -
 Jeep Wrangler (2021)6.4 V8 GAS FI 6424ccIn Stock$399.99BUY
+ -
 Jeep Wrangler (2021)2.0 L4 PLUG-IN HYBRID EV-GAS (PHEV) FI 1997ccIn Stock$399.99BUY
+ -
Where To Buy
Questions & Answers
Be first to ask a question

​​​​​​​
SALES
PHONE SALES (PT)
  • Monday - Friday: 6 a.m. - 5 p.m.
  • Saturday: 7 a.m. - 12 p.m.
  • Sunday: Closed
Customer Service (PT)
  • Monday - Friday: 7 a.m. - 3 p.m.
  • Saturday: Closed
  • Sunday: Closed
FOLLOW US