Warn Semi-Hidden Winch Kits

A: I put both of them on my 2016 tundra and they fit just fine so I’m assuming they will fit a 2021 tundra 

A: 1. Yes, the Warn VR EVO 10-S Winch with Synthetic Rope - PN: WAR103253 will fit in the Warn No-Tube Semi-Hidden Winch Kit (Black) - PN: WAR106674. 2. Yes, both of these will fit the 2021 Toyota Tundra Platinum.

A: No this will not fit a 2024. Go check the website for Warn... they have no bumpers that fit that truck currently.

A: Fits sixth-generation (20-22) Subaru Outback. Not compatible with 2021 XT models or Wilderness Edition. Fully tested and compatible with AXON 45, AXON 55, VRX 45, and other powersports winches up to 6,000 lbs. in capacity (with mounting bolt pattern: 3.0” x 6.59” or 76.2mm x 167.4mm)

A: No, unfortunately there is no cutout or light bar mount with this bumper.

A: Yes, Jake it will fit the 2019 Chevrolet Colorado Z71

A: It is, just remember to purchase the bumper without the hoop if your vehicle has the safety sensor in the front.

A: I had already switched to CBI skid plates

A: It's fully assembled, you just trim away part of your plastic bumper cover and then bolt it on. Looks great on my truck!

A: The Warn Semi Hidden Winch Mount Kit - PN: WAR100022 weighs 50#

A: No mention of the block heater plug. Just that this product may interfere with driver assist systems such as adaptive cruise control and parking assist systems that have sensors or cameras installed in the bumpers or front grill area. If your vehicle is equipped with any of these systems or features, consult your vehicle owner’s manual before installing this product. These systems may need to be disabled as a result of installing this product.

A: Can mount 20” light bar in place of the winch | Grille guard tube offered as a bolt-on option and includes provisions to mount lights (sold separately)

A: Grille Guard sold separately - PN 106236 (Can mount 20” light bar in place of the winch) Grille guard tube offered as a bolt-on option and includes provisions to mount lights (sold separately)

A: Look on YouTube, there’s a guy who does a video installing it. There’s two small section like 2-4 inches wide and about 1/2-1” deep where the mounting slides in and bolts to frame.  Other say it’s not true, but this guy did it so, they are idiots or can’t follow instructions nor videos worth dog pooh 

A: Fits sixth-generation (20-22) Subaru Outback. Not compatible with 2021 XT models. Shown with optional PN: WAR106398 grille guard tube, sold separately.

A: Not sure the year, but if your truck has its sensors in the corner you should be fine. The SEMI HIDDEN KIT will fit: 2014-2020 TOYOTA TUNDRA - PN: WAR103209

A: Designed for fifth-generation (2019-2021) Subaru Forester Semi-Hidden Kit. Looks like they haven't tested it on a 2022 yet.

A: The Warn Semi-Hidden Winch Kit with No Grill Guard (Black) - WAR106254 | Weighs # 98.00

A: 2014-2022 TOYOTA 4RUNNER | Mid-Frame Winches Up To 12000 Pounds Except PowerPlant/ 9.0RC/ M8274-50 | The WARN Semi Hidden Kit is ideal for fifth-generation Toyota 4Runner and third-generation Toyota Tacoma owners looking to have a hidden winch mount, but also a level of protection to the front of the vehicle.*Provides Two Recovery Points For Shackles | *Low-Profile 2 Inch Grille Guard Tube Adds Frontend Protection | *Constructed Of Heavy-Gauge Steel With A Durable Black Textured Powder Coated Finish To Protect Against Corrosion | *Built-In Port For Clutch Lever Access Or Lighting (4Runner Only) | *Easy Install - No Need To Relocate The Winch Control Pack | *Limited 1 Year Warranty.

A: Our site says it does fit the 2021 Tundra TRD PRO. Warn Semi Hidden Mounting Kit - PN: WAR103209

A: Warn does not have fitment info on the 2022 models yet however it looks like Subaru made a change to the frontend for 2022 so I doubt that the 106396 will work.

A: Should, works with my Trd Offroad with Rci skid plates.

A: Currently Fits: 2015-2020 CHEVROLET COLORADO | Hidden winch mount and front-end protection in one package. Note: Not compatible with ZR2 and Bison front bumpers.

A: Drop metal skid plate down to allow access to install. The 7/16 bolt goes through the rear of the bracket and through the frame. https://www.4wheelparts.com/sku/Warn/standard/100028A0.pdf

A: Warn does not have any fitment info on the Sequoia’s unfortunately, we can only state that these fit the Tundra from 2014-2021 without the TSS (Toyota Safety Sense).

A: Hidden winch mount and front-end protection in one package. Winch sold separately.

A: If it is less than 12k lbs. Supports mid-frame winches up to 12,000 lbs.

A: Hi Andrea, the Warn Semi-Hidden Winch Kit (Black) - 103210 does not include a winch. The Warn semi-hidden winch kit fits all current WARN mid-frame winches (excluding M8274-50 and PowerPlant)

A: Yes you can.

A: Unfortunately both of those will only fit through 2020. Looks like the Colorado was refreshed for 21 and so far Warn doesn't have anything for it.

A: Part # 106672 will not fit the XD9000i. This bumper will only fit the Zeon’s, VR Evo’s, 9.5xp, XD9 and the M8.

A: We're not familiar with that brand. Warn only has fitment info for our own products.

A: It is compatible with mid-frame winches up to 12,000 pounds. We're not familiar with that brand of winch but most of the winch mounts have the standard winch mount footprint for mounting. It will not accept winches with the tall solenoids, like the PowerPlant/ 9.0RC/ M8274-50.

A: Around 100#

A: Part # 106252 fits 2016-2020 Tacomas.

A: No it does not.

A: According to Warn, this only fits 2018-2020 Subaru Crosstrek

A: No it will not fit.

A: This fits 19-Current Subaru Forester, not the older models.

A: Optional bolt-on grille guard and skid plates are sold separately.

A: Not sure what year you have but the if your truck has its sensors in the corner you should be fine, Feel free to call into the sales line to place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: Can mount 20" light bar in place of the winch. Winch and lights not included.

A: The front end plastic, where the winch would mount.

A: Hello Allan R, I just spoke with Warn. Yes the WAR103210 will fit the 2020 Z71 model. We also carry the WAR106672 (same without bull bar). Thanks for checking us out.

A: 100022 is not compatible with the DRCC/TSS Toyota systems. However we do have part # 106254 without the grille guard that will work.

A: This fits all current WARN mid-frame winches (excluding M8274-50 and PowerPlant). Any of those will work for you.

A: No, the grill guard will interfere with the TSS sensor.

A: Yes it will fit.

A: This Semi Hidden Winch front bumper will not work with your Rav4, it is for 14-18 Toyota 4Runner.