Warn Premium Manual Locking Hubs (Chrome ) - 9062

Specifications

  • Warn | Part Number: WAR9062
  • Spline:27 Splines
  • Finish:Chrome
  • Knob Material:Metal
  • Fitment:Direct Fit

PRODUCT OVERVIEW

The WARN Premium Hub is a no-compromise hub designed for the hardcore off-roader or truck owner who will accept nothing less than the industry standard in performance. The all metal construction and ZA Alloy dial ensure years of reliable functioning. This dial requires a full 9/10ths of a turn to ensure positive engagement of the inner drive gear to the clutch ring. To make sure they stay engaged, WARN premium hubs use a thick internal wave spring and heavy dial detents. We know our premium hubs will be used hard, so we build them to last. We're so confident, that all WARN hubs are covered by a lifetime limited warranty.

Related

Reviews

4.5
4.0
Easy going on - a good value overall

I purchased the hub kit as replacements for damaged units during a complete axle rebuild on my Jeep. The hub kit came right out of the box and bolted on cleanly with no trouble. Can't wait to put them to use!


from Irvine, CA |
5.0
New Warn Hubs

Should have replaced those old Selectro hubs a long time ago!


from mesa, az |

Question & Answers

8 Answered questions

Will these new hubs come with all hardware for installation, gasket etc ? ... Instructions ...

Asked by Dean from New Hampshire on

Hello Dean Yes they come with the gaskets and screws for holding the cap to the body. You will have to use the 3/8th bolts over again to hold the hub on. Thanks

Answered by Rody from New Hampshire on

what is covered under a lifetime warranty?

Asked by Ken from Camino Ca on

hello anything that is found to be defective in workmanship.

Answered by Rody from Camino Ca on

I own a Toyota Prado 1996 (kzj95) and would like to know if these or any other manual locking hubs are available for my vehicle.

Asked by Nick from on

Hello Nick The 9062 hub is for early Jeeps. We don't list the Prado but if it has the IFS front end you use the 28761 if it is an straight axle you would use 28771. Hope this helps.

Answered by Rody from on

See all questions & answers

Manufacturer

In 1948, Arthur Warn founded Warn Industries to construct locking hubs for surplus World War II Jeeps. Ten years later, the Warn winch was manufactured to fill the need for a reliable recovery tool to aid off-roaders stuck in challenging situations. Since then, Warn has grown to offer a wide range of gear with the hallmarks of durability and affordability. 1988 spawned the aftermarket industry's first ATV winch and today their PowerSports line of winches ranks among the most esteemed in the industry and jeepers call on Warn for electric, hydraulic and severe duty components that get the job done. Shop Warn Now

Promotions

New Everyday Low Price!