This compact, robust unit is not only powerful, but its an outstanding value. The M8000 has a powerful 4.8 hp. Series-Wound motor, 3-stage planetary geartrain, and can pull up to 8,000 lbs. - perfect for most trucks and SUVs, including Jeeps.M8000 Specs/Part Numbers [*]Part Number: PN 26502 CE (12V DC) 100' wire rope and roller fairlead[*]Rated Line Pull: 8000 lbs. (3630 kgs.) single-line[*]Motor: 12V 4.8 hp Series WoundTM[*]Remote Control: Remote, 12' (3.7m) lead[*]Geartrain: 3-Stage Planetary[*]Gear Ratio: 216:1[*]Lubrication: Aeroshell #17[*]Clutch (freespooling): Sliding Ring Gear[*]Brake: Automatic Direct Drive Cone[*]Drum Diameter/Length: 2.5/9.0 (6.4cm/23cm)[*]Weight: 74 lbs. (34 kgs.)[*]Wire Rope: 100', 5/16 diam. (30m, 8mm diam.)[*]Fairlead for PN 26502: Roller[*]Recommended Battery: 650 CCA minimum for winching[*]Battery Leads: 2 gauge, 72 (1.83m)[*]Finish: Argent Gray Powder Coat[*]Nuts/Bolts: PN 39625
The perfect winch for a Jeep if you aren't looking for something too flashy but want a quality, dependable unit made in N.America. Line speed is awesome, power is solid, seems like this will stand up to years of use.
By Finn Jeeper from Calgary, AB
Warn winch M8000
Can't wait to try it out!
By Flyguy from Middle TN
I Would Purchase this it again!
Great item to get you out of a sticky situation, when you are out in the trails,with your buddy.
By Fabian from Lake Isabella, CA
The winch works awesome the 1st time I used it was to pull a 20' Uhaul from getting stuck in snow (it was only yp to the rim but still) single line 2nd time was my fault i was showing off and got stuck in snow up to the axles and single line pulled my self out... So far so good :D
By Frenchy from Maine
Used & Abused
This thing's pulled me out & up a lot of nasty terrain, It's recovered a lot of other stuck rigs I plan to buy another one for my second vehicle.
By HurtTaco from Wa.
I rolled my 2005 TJ Unliimited. Actually, it only tipped onto the driver's side. We were in the middle of nowhere, and after making sure everyone was unhurt, I realized we were miles from the closest road where I could summon help. I started to smell gasoline, leaking from the filler, as well as lube oil coming from the diff vents. I attached the winch cable to a tree about 60' to the right of the Jeep at an almost 90 degree angle. The winch pulled it onto the tires in about a minute. We were able to drive out and got home safely. The insurance company totaled the Jeep due to the damage and because it "rolled". I installed another M8000 on my new 2013 JK. Don't leave home without a Warn on your rig!
By Steve-o from Arizona
Used to pull out my jeep.Line speed,pulling power.
By johnny from orlando,fl
Winches like no other
Winches like you expect a Warn winch to work. Haven't had to rely on it as my sole recovery tool, but I like knowing I have it incase I need it!
By Slim Jim from Aurora, CO
"I would buy this product again and again"
By Rhall from Alabama
Best Winch out there!!!
This is by far the best deal you will ever see for a winch [$] for a WARN!!! It doesn't get any better. I have used and abused my M8000 and every single time it works flawlessly no matter how much mud, snow or how many rocks it been under. Don't wast your money on a cheep 400 knock off that only works a couple of times. By warn and it will always have your back. Either mount the solenoid to the grill or purchase a brackett! Don't forget the brackett though if that how you want to mount it. It tells you that in the product description but alot of people forget to read that part and then they whine. Awesome Awesome Winch!!!!!
I have a 2007 4Runner with a Shrockworks Front Bumper. Their literature states "Hidden winch mount accommodates most non-integrated solenoid winches up to 9500 lbs." Does this model have a "non-integrated solenoid"? If not, which Warn models do?
Dan from Centennial, CO on
Thanks for the inquiry Dan, the Warn M8000 Self-Recovery Winch part # WAR26502 this winch has a non integrated solenoid and should work just fine.
from Centennial, CO on
Hi I was wondering if i can put a wireless remote on this winch and if so which one do I need
Timnicho from Des Moines IA on
Yes, you can install the WARN Wireless Winch Control System Part Number: WAR90287. Thank you.
from Des Moines IA on
I have a tow truck which i operate, and i would like to know if this winch would be able to pull an inoperable S.u.v for eg. a Nissan Pathfinder or Toyota Highlander Or Ford Pickup. onto the flatbed of my truck.
Please look into it and respond.
Apogee Motors from on
Thanks for the question.
It should not have any problem pulling the truck/ car on a trailer, but this winch is not designed to be used for loading and unloading trucks/ cars.
You will want to look into an industrial winch for this use.
In 1948, Arthur Warn founded Warn Industries to construct locking hubs for surplus World War II Jeeps. Ten years later, the Warn winch was manufactured to fill the need for a reliable recovery tool to aid off-roaders stuck in challenging situations. Since then, Warn has grown to offer a wide range of gear with the hallmarks of durability and affordability. 1988 spawned the aftermarket industry's first ATV winch and today their PowerSports line of winches ranks among the most esteemed in the industry and jeepers call on Warn for electric, hydraulic and severe duty components that get the job done. Shop Warn Now