Whether you're planning an overland expedition or just out exploring, these bumpers are designed for life off road. Features include a low, recessed winch mount for the ultimate winch protection, and a wrap-around design that offers strength and style. There are recessed ports and mounts for auxiliary lights, and a welded-on CNC-formed grille tube for increased protection (optional). There are recessed jack points for increased recovery options, and eyelets for D-shackles. Mounting fasteners are hidden inside the bumper for a clean finish and reduced corrosion. This is the ultimate bumper for those who are looking for versatility, capability, and protection.
The main (4) each side mounting fasterners have (3) with weld-on tension head nuts for bolts and one a slot (I guess to handle fab tolerances) with a bolt and nut. The bolt that goes thru this slot was put on the upper, outboard fastener location. TOTALLY LAME! It is hard to get to and could have just as easily been the top, inboard faster that is REALLY EASY TO GET AT!! A case of the desiner either looking at the mirror image or never installed this himself. And the kit should have come with a wireing harness with factory male/female ends so all you had to do is connect them for the OEM fog lights in lieu of cutting and splicing which is totally a backyard hack give the poor crip type connectors which always fail given time. And overall it is not a good feeling to be cutting off brackets on your Jeep. And I can't stand a mix of imperial and metric fastners in an add-on kit. Why not just make them one or the other for crying out load.
But once you get over that it's a pretty clean looking bumper for someone who does other things besides rock crawling with their rig.
By Mike from WA
installation manuel is sub-par
The installtion manuel is not detailed enough. very poorly written. Same goes for the rear bumper. Something was lost in the Chinese translation.
Front bumper was supposed to have 8 nuts welded to the bumper where you attach it to the frame of the jeep. 6 were welded in palce a the two most difficult to bolt to where missing...poor quality control. I would not recommend Warn bumpers to anyone unless they really like to be challenged
By mammoth1 from capo beach, CA
Solid and Nice Looking
This is a heavy bumper. YOU WILL need help installing this in the form of a couple friends or in my case an ATV lift was the perfect helper. Take you time and be patient. I think Warn could learn a few things about technical instructions. The fog lights "wiring extension kit" is a complete joke. It contained two wires that are about 8 inches long, 4 crimp connectors and some plastic wire shielding. The only thing that was useful was the wire shielding. I took apart the existing wire harness and adjusted the locations that the wires Y'd apart and I was able to get the extra length I needed and the wires are still slack. I used the provided wire shielding to protect the newly exposed wiring. The bracket for relocating the vacuum canister barely fits in place with ZERO room to spare! I think they changed the relocation bracket at some point.
I would have given a 5 if it were not for the poor instructions.
Will the elite series fit a 201( JK Wranbler Sport. Also, is there cutting involved?
Tank from Dallas on
The WAR87750 will fit a 2007 through 2014 JK Wrangler Sport. On a 2012 or newer
the vacuum canister is relocated and the mounting bracket trimmed. Also on some winches the Jeep bumper mount may need the corner trimmed. Thank you for your question. Jon Snyder 4Wheelparts
from Dallas on
I used the fitment guide and it said that the bumper will fit on a 2014 2 door wrangler sport but not a 2015 wrangler 2 door sport. Is this a glitch in the system or is there an actual difference between the 2014 and the 2015?
Joseph from Half Moon Bay, CA on
The Warn Elite Series Winch Mount Front Bumper with Grille Guard WAR87750 will fit the 2015 Jeep Wranglers. Thank you.
from Half Moon Bay, CA on
I just purchased a 2015 Jeep Rubicon Unlimited. The description says it will fit 2007 to 2015 Wranglers but when I select the specific "will it fit my vehicle" it says it will not fit. So.... will it fit? And does the vacuum pump need to be relocated on this model?
DP from on
sir, nothing available for the 2015 JK. Thank you for your question.
In 1948, Arthur Warn founded Warn Industries to construct locking hubs for surplus World War II Jeeps. Ten years later, the Warn winch was manufactured to fill the need for a reliable recovery tool to aid off-roaders stuck in challenging situations. Since then, Warn has grown to offer a wide range of gear with the hallmarks of durability and affordability. 1988 spawned the aftermarket industry's first ATV winch and today their PowerSports line of winches ranks among the most esteemed in the industry and jeepers call on Warn for electric, hydraulic and severe duty components that get the job done. Shop Warn Now