TrailFX Bedliner

Great bed liner! Fits perfectly! Can't beat that price!

Your tailgate is one of the most used and abused parts of your truck. Protect it from scratches and dents with this heavy duty tailgate liner! It's a simple ten minute installation for lifetime tailgate protection.

The tailgate liner is a perfect fit for a 2023 Ford Maverick XLT. Excellent craftsmanship at an unbelievably affordable price.

This custom fit 2019 Ford Ranger tailgate liner fit great. The screw holes aligned with the screws in the tailgate so I didn't have to drill any new holes. It is made of sturdy material and will protect the tailgate from scrapes and scratches, especially when I slide my kayaks into the bed.

Due to the recesses in the tailgate surface, eight (8) spacers are required to properly snug up the fasteners. Each spacer should be about 3/4" diameter and 1/4" thick, with a 3/16" hole. I cut mine from some 6 mm (0.236") sheet plastic and the thickness seemed about right. Whether the manufacturer should provide these or not depends on how much DIY you prefer, but for the cost of this liner I cannot complain. The OEM screws are just barely long enough to install this part, so you should not need to get longer ones. This is a blessing because they're coarse thread sheet metal screws, harder to source than metric machine screws like those used elsewhere in the bed. You will need a Torx T-25 driver for them. Ford actually uses Torx Plus fasteners, so ideally a TP-25 is the correct driver. For a low-torque application like this, a standard T-25 works just fine. The liner hole pattern was not quite perfectly centered or parallel with the top edge, although the holes are large enough to allow some adjustment. In my case, the side-to-side offset required that I enlarge the latch relief area on the passenger's side, but tin snips made short work of this. All in all, the shortcomings are all normal for aftermarket products, so I'm satisfied with this liner and would buy it again.