Trail Gear Rock Defense Front Bumper (Bare) - 120061-1-KIT


  • Trail Gear | Part Number: TGI120061-1-KIT
  • Width:Full
  • Light Mounts Included:Light Mounts Not Included
  • Winch Mount Included:Winch Mount Included
  • Finish:Bare
  • Material:Steel
  • D-Ring Mount Included:D-Ring Mount Not Included
  • Fitment:Direct Fit


HREW bumpers are strong, but Trail-Gear had to take things to the next level by making our bumpers out of 1020 DOM (1.75" X .120" wall).1020 DOM is more dent resistant than HREW tubing and it will not split down the seam as we have all seen the cheaper HREW tubing do. We can confidently say that our Rock Defense bumpers are one of the strongest on the market. Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches. For larger winches some minor trimming of the grille may be required. Bumper also features a shackle receiver that will make a great anchor point for winch or strap recoveries. Note: Turn signal mounting tabs are not included. Unpainted steel finish. Will not work with roller type fairlead, requires hawse type fairlead. Not intended for use with a body lift. Bumper not rated for towing.



Great bumber but

Ok so it's a great product. But I bought it for my 92 toyota 4x4 and I also bought the frame reinforcement bumper plate. Well the bumper only lined up with the four outside holes. That was before I installed the frame reinforcement bumper plate. When I did install it none of the holes lined up. So if you are ordering it for the 92 toyota 4x4. Hope you have tools to weld and enlarge bolt holes. Also the gram bolts it comes with also don't fit. They are to small you need 2 inch long bolts not 1/2 inch. But other then that it look sick especially painted black

from Watsonville ca |

Question & Answers

3 Answered questions

What max load will the receiver hitch handle?

Asked by John from on

Hello John, You will need to contact Trail Gear direct for exact specs. The only state this is a recovery point.

Answered by from on

Will this for a 2000 Toyota 4runner

Asked by Austin carrigan from Mooresvile nc on

Hello Austin, the Trail Gear Rock Defense(TM) Front Bumper part# TGI120061-1-KIT will only fit the 90-95 4 runner. Thank you for your inquiry.

Answered by mikey from Mooresvile nc on

What size is the hitch?

Asked by Jtsmith0108 from Houston, Tx on

Thanks for the inquiry Jtsmith0108, the Trail Gear Rock Defense(TM) Front Bumper part # TGI120061-1-KIT this has a 2 inch reciever.

Answered by from Houston, Tx on


With over a decade of experience, Trail-Gear has been developing, designing and distributing products for adventurous off-roaders and especially wheelers into rockcrawling. Located in Fresno, California, the company specializes in suspension-related parts and accessories including bumpers, armor, axles and drivetrains. The company's employees live and breathe the off-roading lifestyle and Trail-Gear strives to keep their products affordable without cutting corners on design and quality. When you need suspension systems, recovery and towing accessories or lighting solutions, Trail-Gear can outfit you for the trail and beyond. Shop Trail Gear Now

This Product Fits the Following:

  • 1995 Toyota 4Runner SR5  
  • 1995 Toyota Pickup Base  
  • 1995 Toyota Pickup DLX  
  • 1995 Toyota Pickup SR5  
  • 1994 Toyota 4Runner SR5  
  • 1994 Toyota Pickup Base  
  • 1994 Toyota Pickup DLX  
  • 1994 Toyota Pickup SR5  
  • 1993 Toyota 4Runner SR5  
  • 1993 Toyota Pickup Base  
  • 1993 Toyota Pickup DLX  
  • 1993 Toyota Pickup SR5  
  • 1992 Toyota 4Runner SR5  
  • 1992 Toyota Pickup Base  
  • 1992 Toyota Pickup DLX  
  • 1992 Toyota Pickup SR5  
  • 1991 Toyota 4Runner SR5  
  • 1991 Toyota Pickup Base  
  • 1991 Toyota Pickup DLX  
  • 1991 Toyota Pickup SR5  
  • 1990 Toyota 4Runner SR5  
  • 1990 Toyota Pickup Base  
  • 1990 Toyota Pickup DLX  
  • 1990 Toyota Pickup SR5  
  • 1989 Toyota Pickup Base  
  • 1989 Toyota Pickup DLX  
  • 1989 Toyota Pickup SR5  


We Pay Your Sales Tax