Trail Gear Lift Kits

A: If you have questions about installing your IFS Eliminator Kit, please call us at 559-252-4950.

A: This product will be for Pre-runner & 4x4 Tacoma’s ( 6 Lug wheels only ) for a 5 lug I would look under fabtech https://fabtechmotorsports.com/product-category/toyota/2wd-toyota/tacoma/1995-04-5-lug/3-inch-systems-1995-04-5-lug/ this would be the best answer for the 5 lug check the notes if the OEM wheels can fit with a spindle .

A: No it does not. However, Trail Gear says On V6 installations, they recommend moving the front hanger forward 3/4". This allows the tie rod to clear the stock 4wd oil pan. It also kicks the shackles forward slightly helping the springs to carry the heavier load of the V6 motor.

A: Hi Colton, The Trail Gear Solid Axle Sway Lift Kit C with ARB Locker is a very extensive kit that comes with most all you need but since your truck has a V6 Trail Gear says may need to replace the radiator as well. This kit does requires fabrication and welding to install. This particular listing is a little light on what is all included and will be updated soon. It does fit your 2002 Tacoma 3.4L V6. There are a few options pertaining to these kits and the best course of action would be to contact our customer service @ 877-474-4821 to go over the options.

A: Hello Lead, Yes, the Trail Gear 5 Inch HD IFS Eliminator Lift Kit TGI110134-1-KIT will allow you to run a 37x12.50 tire. Please Note: You may need to trim some of the firewall to clear that tire size. That will also depend upon wheel backspace. Thank you.

A: Sir, if you have a 1986 to 1995 Toyota P/U and 4Runner this would be the correct kit for you. thank you for your question.

A: Hello there, the Trail Gear Solid Axle Swap Lift Kit C with ARB Locker will work fine with your toyota 1987 pickup. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the question. Trail Gear 5 Inch IFS Eliminator Lift Kit TGI110003-1-KIT Most people run a 35/12.50 with this kit. With the 3" body lift, you can defiantly go wider. This is going to be dependent on the wheel size you are running. Thank you.

A: Hello Kazu, With the Trail Gear 3 Inch Rear Lift Kit TGI110036-1-KIT you will still retain the factory antilock braking system. If you are swapping in a different rear axle you will need to upgrade the vehicles rear proportioning valve to an adjustable. We offer the Adjustable Brake Proportioning Valve By Stainless Steel Brakes SSBA0707 http://jo.my/rgoaqu Thank you for the email.

A: A Detroit locker is always engaged while an ARB locker acts like an open diff until engaged by air pressure. If you drive the truck on the street I recommend the ARB unit as it drives better on the street.