Trail Gear High Steer Kits

A: Hello LittleSteve, Provided you have an 8" Toyota steering axle in the rear of the vehicle, this will fit. Thank you.

A: Hello Ichiban This kit is for the straight axle Toyota's. Take a look at the one by Blue Torch Fab here is there part number BTF07050 We have their kit for the Fords you can look at it on their website. http://www.bluetorchfab.com/Product/1375/BTF-Dana-60-High-Steer-Kit-.aspx

A: Hello Derek, The Trail Gear High Steer Kit Part Number: tgi130005-1-kit is designed for a left hand drive solid axle Toyota.

A: Hi Joe Daddy You really do not want to bring the drag link under the spring as when you steer to the right the drag link may hit the spring then when the right side compresses and droops while you steer right it gets worse. we never recommend blocks in the front as they tend to sheer the pin and fall out. very dangerous. Thank You

A: Hello Yes this gives you the new pitman arm and steering arms for your conversion. It makes for a great steering setup with a lot better control.

A: Hello Yes you do need to get the IFS steering box so the pittman arm moves left to right. You steering moves the pittman arm front to rear. Yes it will work with the Rough Country lift's.