Trail Gear Double Ended Ram, 10 Inch - 130283-1

universal fit logo


  • Trail Gear | Part Number: TGI130283-1
  • Fitment:Universal Fit


Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top-level rock crawling competitors and the toughest trails in the world. Based on our experience we knew exactly what we wanted in a ram, and what we didn't. Most rams on the market only have one rod seal. We started with the primary and secondary rod seal to ensure that fluid leakage would never be an issue. We also included two wiper seals in our design to make sure that dirt and debris stay on the trail and don't get into your steering system. In addition, we designed our ram with a Triple Lip Piston Seal for consistent steering with no drift or fluid bypassing the piston. In true Trail-Gear style we also had to make our ram the strongest on the market, so we added a feature that you will not see on any other ram on the market. We designed ours with a piston wear band and a rod bushing. The bushing allows the rod to absorb much higher side loads. We also machined our piston shaft out of a single piece of 4340 chromoly. Other rams on the market use a two-piece welded or threaded piston shaft that can fail under severe loads. Our Double Ended Ram have a 6", 8", or 10" stroke x 2.25" bore x 1.125" rod. The cylinder has a black zinc plate finish while the rod has 3/4x16 female threads on each end and is made entirely out of 4340 chromoly material. NOTE: If you are using our Rock Assault™ 9 Front Axle Housing, you will need to use a 10" ram for your steering setup. CAUTION: These rams are for use with hydraulic or power steering fluid only. The use of Automatic Transmission Fluid or semi-synthetic blends will void the warranty

Customer Reviews

0.0 0.0
0 Customer reviews

Question & Answers

0 Answered question


With over a decade of experience, Trail-Gear has been developing, designing and distributing products for adventurous off-roaders and especially wheelers into rockcrawling. Located in Fresno, California, the company specializes in suspension-related parts and accessories including bumpers, armor, axles and drivetrains. The company's employees live and breathe the off-roading lifestyle and Trail-Gear strives to keep their products affordable without cutting corners on design and quality. When you need suspension systems, recovery and towing accessories or lighting solutions, Trail-Gear can outfit you for the trail and beyond. Shop Trail Gear Now