TeraFlex High Steer System

A: Hello Don, Yes, the TeraFlex High Steer System will fit the G2 CORE 44 axles. Thank you for the question.

A: Thanks for the inquiry Johnny, the TeraFlex High Steer System part # TER1813000 this will work Cherokee XJ.

A: Thanks for the inquiry Johnny, the TeraFlex High Steer System part # TER1813000 this will work Cherokee XJ.

A: Hello Ryan, Yes, the TeraFlex High Steer System will fit with your vehicle application. Thank you.

A: Hello Bob, Yes, the TeraFlex High Steer System TER1813000 is a direct bolt-on installation for the Dana 30 and Dana 44 axles. Thank you.

A: Hello It will work on other lifts that are lifted the same way as the TeraFlex kits. It will work with the Pro Comp, Rubicon express, FabTech, most all common lift brands Thanks

A: Hello Steven, the Teraflex High steer kit part# ter1813000 will work with the Dana 44 front axle you were looking to purchase. Thank you for your question.

A: Hello Yes the high steer system will work with the G2 Dana 44's also.

A: Hello Wade. The TeraFlex High Steer System, part # TER1849000, comes with the tie rod and drag link w/ one ton tie rod ends, pitman arm, high steer knuckle, and tapered ends. Thank you

A: Hi McClynes This is a very sticky question. with out knowing what you did for the track bar i cannot make a suggestion. you need to match the angle of the track bar to the drag link or you will get terrible bump steer as a result. there is a cross over steering knuckle from TeraFlex http://jo.my/c0u45j but you will need to work the track bar to prevent the bump steer. Thank You

A: Hello dentking2, Thank you for the question. The TeraFlex High Steer System ter1849000 retains the drivers side factory steering knuckle. No need for replacement.

A: Hi Star\ The tie rod ends are 7/8" with 1 1/4 tubing Thank you

A: Hi Chris This kit does not contain a steering stabilizer bracket. You will be able to reuse your existing bracket or one from an aftermarket kit http://jo.my/2tzx25 Thank you