A: Yes,  comes with handlebar switch and a remote switch with a cable. 

A: Yes, includes the handle bar and hand held.

A: It will come with the wiring cables. If you have the proper winch mount on the Sportsman it would mount on it.

A: The Overall dimensions are = (LxWxH) 12.6 inch x 4.13 inch x 4.35

A: Hello hunter84, This will fit your ATV. It comes with a universal winch mount kit. Thank you.

A: Hello Yes it would fit but is way to small to pull your Jeep. It is for the Yamaha and Honda UTV's

A: Hello Jacob, Yes, the Smittybilt XRC3.0, 3,000 lb. Compact Winch S/B97203 will fit your vehicle. It comes with a universal mounting plate. Thank you.

A: Thanks for the inquiry Redd, the Smittybilt XRC3.0, 3,000 lb. Compact Winch part # S/B97203 these are for ATV's use part # S/B97495.

A: No like most winches the Smittybilt XRC3.0, 3,000 lb. Compact Winch is not US made. Hope this helps!

A: Thanks for the inquiry K.W., the Smittybilt XRC3.0, 3,000 lb. Compact Winch part # S/B97203 a wireless system is not avaiable through smittybilt. Warn does offer one part # WAR90288 here is a link for their winches. http://jo.my/wevjyl

A: Hello Brad, the Smittybilt XRC3.0, 3,000 lb. Compact Winch part# S/B97203 does freespool out. Thank you for your question.

A: Hello smoking, The Smittybilt XRC3.0, 3,000 lb. Compact Winch comes with 5.5mm x 10m cable.

A: Hello Duke, This Smittybilt XRC3.0, 3,000 lb. Compact Winch will fit that vehicle. I am showing that your Artic Cat has a factory winch mount which this is a direct bolt on. No mounting plate needed.

A: Hello there, the Smittybilt XRC3.0, 3,000 lb. Compact Winch is for ATV applications we would recommend the XRC-9.5K Waterproof Winch Gen2 part number S/B97495. Here are the technical Details *Waterproofing: IP67 Rating *Fairlead: 4-Way Roller *Rated Line Pull: 9,500Lbs (4,309kgs) single-line *Remote Control: Included *Motor: 6.6hp Series Wound *Recommended Battery: 650CCA Minimum for Winching *Control: Remote Switch, 12’ (3.7m) lead *Battery Leads: 25mm, 72" (1.83m) *Gear Train: 3-Stage Planetary *Gear Ratio: 161.28:1 *Finish: Textured Black *Weight: 78.0 lbs (35.0 k) *Clutch: Sliding Ring Gear Mounting *Bolt Pattern: 10.0 " x 4.5 " *Brake: Automatic In-Drum *Overall Dimensions (L x W x H): 22.3" x 5.4" x 9.4" *Drum Size: Diameter 2.5" *Cable Type: Wire Rope *Cable: 93.5’ 5/16" Diameter

A: Hi Aus This winch comes with a universal mounting plate that should fit your yfz 450. although many times you have to drill a hole or two in the mounting plate Thank You

A: John- Thanks for asking. I would consider modifying the skid plate to clear the Smittybilt XRC3.0

A: Bubba- Thanks for asking. The Smittybilt XRC3.0 3,000lb compact winch has metal gears.

A: Grumpy- Thanks for asking. The Smittybilt XRC3.0 winch would not have enough strength to pull your Ford F-150 out of the mud even with just a horizontal pull. I would recommend the XRC8 winch that you can find here http://jo.my/p4mnqu

A: Hello Tim, The Smittybilt XRC3.0, 3,000 lb. Compact Winch S/B97203 comes with a universal winch mount, fairlead, controller and winch. Thank you for the email

A: Hello Tim, The Smittybilt XRC3.0, 3,000 lb. Compact Winch S/B97203 will fit your application. It comes with a fairlead, universal mount and hardware. Thank you for the email.

A: Hi Jim The mounting plate that comes with the Smittybilt XRC3.0 winch is a universal mounting plat that may requiring drilling to mount to your specific vehicle. Thank You

A: Jim- Thanks for the question. If you have a winch mount for your Kawasaki Prairie 600 then the Smittybilt XRC3.0 3,000lb. winch will fit.

A: Alex- Thanks for the question. The Smittybilt XRC3.0 3,000 lb. winch could be mounted to the front end of your 2013 Jeep Wrangler but you will need a winch plate such as this unit here http://jo.my/x1dvww If you are looking to use this as a recovery winch you should probably opt for a minimum of an 8,000 lb. winch like the the XRC8 unit you can find here http://jo.my/tk5ufq

A: Will- Thank you for the inquiry. Depending on the weight of the vehicle you are lifting the Smittybilt XRC 3.0 utility winch should perform well for lifting the wheel. The brake on this winch does self lock so you should be ok leaving it in a lifted position.

A: Yeas you can mount the Smittybilt XRC3.0 3000lb. winch in a trailer to help load items.