Smittybilt Standard Bucket Seats

A: These seats Recliners? Will they fit in a 1996 Ford bronco?

A: Not sure I installed my seat in a1971 Bronco. I mount the bracket that I bought was bolted to the to the seat first. I marked and drill holes for installation then mounted seat. I installed washers on the front of the seat to tilt in back. 1 inch for comfort. 

A: No, you need TJ adapter bracket for it

A: Hello Aubrey, this Smittybilt bucket seat will fit your 1994 Wrangler YJ.

A: Hi Jmg, This Smittybilt Standard Bucket Seat is a direct bolt on for your '76 CJ, it does not require any separate adapters for your model. Thanks for your inquiry.

A: Hi gbeatty Yes both Standard Bucket Seats will bolt up direct. Driver side should have a slider and no slider on the passenger side. Thanks

A: Hi Jack's 89MJ, These Smittybilt Standard Bucket Seat are grey, they will fit in your '89 MJ if you get the required mounting brackets. Here they are and thanks for your inquiry.http://www.4wd.com/Jeep-Interior-Parts-Accessories/Seat-Bracket.aspx?t_c=9&t_s=418&t_pt=8680&t_pn=MCS624500

A: Hey Rogue, the Smittybilt Standard Bucket Seat comes in a spice color which would match you stock interior best part number S/B44917. These would adapt to your stock seat brackets and would still maintain your flip forward feature. You will need to buy adapters to work with your 2002 Wrangler part numbers S/B49900 and S/B49901. Thanks for your question.

A: Hey Kayak guy, the Smittybilt Standard Bucket Seat would require you to buy part number S/B49900 and S/B49901. Thanks for your question.

A: Hi KC It will depend if your roll bar was drilled for a shoulder harness if you can use one of the BII0721-637401. If not the BII0721-63701 or the BII0721-63101 lap belts with the Standard Bucket Seat. Thanks

A: Hi KC The Standard Bucket Seat will fit both driver and passenger sides and will have the room to tilt forward on your 1977. Thanks

A: Hey Squirrel, the Smittybilt Standard Bucket Seat will work for both sides on your Jeep. Thanks for your question.

A: Hello Steve, No, this will only fit the 1976 to 2015 Jeeps. Thank you

A: Hello Steve, No, this will only fit the 1976 to 2015 Jeeps. Thank you

A: Hi Alan The Standard Bucket Seat is to wide to fit in a Samurai. Rugged Ridge use to make a seat but they have discontinued them. Thanks

A: Hello Earl, Yes, this seat will fit in a 1979 Jeep CJ-5. Thank you for the question.

A: Hello Jakes, Yes, this seat will fit your vehicle application. Thank you for the question.

A: Hello Parker, The Smittybilt Standard Bucket Seat will bolt right up to your driver side seat bracket. The passenger seat will require modification. Thanks for the inquiry.

A: Hello Pete, The Smittybilt Standard Bucket Seat will be a direct bolt up to your factory CJ5 bracket. The passenger side will require modification. Nobody makes an adapter bracket as of now. thanks for the inquiry.

A: Hello Patrick, Yes, the factory seat sliders and mounts will bolt-on. Thank you.

A: Thanks for the inquiry GV, the Smittybilt Standard Bucket Seat in Black Vinyl part # S/B44901 will fit your 2003 wrangler.

A: Hello dave, Yes, however some modifications will be required to install the seat brackets on the Smittybilt Standard Bucket Seat in Spice Denim S/B44917. Thank you.

A: Hello Goose, The Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim will retain the factory recline and sliders. Thank you.

A: Hello Yetti, We only have the shipping dimensions available. They are 31" Length x 19" Wide x 12.50" Tall.

A: Hey Nick, the Smittybilt Standard Bucket Seat will work for your 1989 Bronco you will just have to drill holes and modify a bit to make it work. Thanks for your question.

A: Bartles, the Smittybilt Standard Bucket Seat measures in at 16"x20" for the base and 28"x20" for the back. Hope this helps!

A: Hello Bill The material is the denim same as the gray denim. The factory used denim on the stock seat since the mid 70's. As for bolting in they go right on the stock seat sliders like the factory seats. Thanks

A: Hello Kip, The Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim should work with your factory hardware.

A: Sam, The Smittybilt Standard Bucket Seat in Black Vinyl are water resistant. Please let us know if you have any other questions. Thanks!

A: Cameron, Unfortunately these seats were designed to fit most Jeeps so custom brackets would have to be made to make the Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim work.

A: Hello steve and thank you for your question! Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim S/B44915 have dimensions of 32"x19"x13" and weigh 27 lbs each. I hope my answer helps 4 Wheel Parts your business.

A: Greg, The Smittybilt Standard Bucket Seat will fit in your 2004 jeep TJ with the adapters you mentioned. Thanks, Don

A: Hello Bib, the Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim part# S/B44915 will not fit your vehicle without modification. Thank you for your inquiry.

A: Coot- Thanks for the question. The Smittybilt Standard Bucket Seat in Black Vinyl does not recline.

A: Jeep_noob- Thanks for asking. These Smittybilt Standard Bucket Seat in Black Vinyl does not fit a 2000 Jeep Grand Cherokee.

A: Hi Gilbert, We have almost 100 of these seats in my warehouse ready to ship so availability is not a problem. The time frame for delivery depends on the ship to state, if you are in Oregon it would be approximately 7-10 business days. Thanks for the inquiry.

A: Shawn, the Smittybilt Standard Bucket Seat in Black Vinyl will fit on the 89 with no problems. Let us know if you have any other questions. Thanks a lot!

A: Feisty Chik- Thanks for asking. The Smittybilt Standard Bucket seat comes in Gray Denim but not gray vinyl.

A: Matikah, With the Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim there is no difference between the passenger and drivers sides. please let us know if you have any other questions. Thanks!

A: Matikah, the Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim are made to be a direct bolt in for the YJ's as long as you have the stock brackets. Since you have the Cherokee seats you may not have the stock brackets. The size of the bottom of the seat is a 20" x 20" square. The bolt holes are 14" wide by 13" long. Hopefully that will work for you. Thanks a lot!

A: Matikah, the Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim has a measurement of 32" measured from the bucket part of the seat. Let us know if you have any other questions. Thanks a lot!

A: Hi Ned The Smittybilt S/B44915 seat will fit either driver or passenger there is no difference between the mounting for the seat. Thank You

A: Jimmy- Thanks for the question. The Smittybilt Standard Bucket Seat in Black Vinyl do not have the easy access capability of the factory seats.

A: David- Thanks for the inquiry. This Smittybilt Standard Bucket Seat comes in Black Vinyl

A: Stan- Thanks for the inquiry. The Smittybilt standard bucket seat does not fold forward.

A: Old Guy- Thanks for the question. The Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim is actually a highly durable Denim cloth material similar to what pants are made from.

A: Jess- Thanks for the inquiry. We do not currently offer a slider option for the Smittybilt Standard Bucket seat.

A: The Smittybilt Standard Bucket Seat in Charcoal Light Gray Denim will fit your 2000 Cherokee (XJ) with the bracket part number s/b49908

A: The Standard Bucket Seat in Charcoal Light Gray Denim will not be a direct bolt in for your 1974 CJ-5.

A: Hello! This seat is stationary and does not recline or tilt. It will slide back and forth if your seat brackets allow it.

A: Hello, These Smittybilt Standard Bucket Seat will work on either side. They do not tilt the floor bracket is what tilts forward to let people in the rear seat. Thank you!

A: Yes, this Smittybilt Standard Bucket Seat will fit your Jeep. Thanks!

A: The Smittybilt Standard Bucket Seat is a fixed back seat, so it will not recline. Because this seat mounts using your original brackets and hardware, it will have the same sliding capabilities as your factory seats. Likewise, the passenger seat will retain the ability to lift forward to allow passenger entry. I hope this information is helpful. Thanks!

A: This Smittybilt Standard Bucket Seat is a fixed-back seat, so it does recline. Because this seat mounts using your original brackets and hardware, it will have the same sliding capabilities as your factory seat. Likewise, your passenger seat will retain the ability to flip forward to allow passenger entry. I hope this information is helpful. Thanks!

A: Nan, your in luck we have one of these Smittybilt Standard Bucket Seats set up in the showroom. The bottom cushion is 19 1/2" wide and 17" front to back. The seat back is 26" tall.

A: Howdy Steamer! The height of the bottom cushion on this bucket seat is 5" from base to top.

A: These seats are vinyl as well. The ?denim? is the pattern not the material.

A: Hello! This seat is completely stationary. There are no manual adjustment levers on it.

A: Hello, To mount these seats in 1997 to 2002 TJ Wranglers, you'll need the following 2 adapters: part# S/B49900 for the driver side, and part# S/B49901 for the passenger side.

A: Hello, All our seats we sell are made to bolt in to Jeeps. They do have different bolt patterns on the bottom of the seats. They may fit in your Toyota pickup but most likely you will have to fabricate an adapter to bolt them in or you can purchase the Corbeau custom seat brackets for your Toyota pickup #CBUC22046L #CBUC22046R $93.99 each

A: These are designed to mount to the factory brackets. So you shouldn?t need to do any modifying.

A: Yes you can match the back seat and the part number for the rear is #S/B8011N.