Smittybilt SRC Roll Cage Kit - 76900

Specifications

  • Smittybilt | Part Number: S/B76900
  • Fitment:Direct Fit
  • Installation Type:Bolt In

PRODUCT OVERVIEW

The all new reinforced cage kits come with everything you will need to strengthen your factory roll bar into a solid foundation if a roll over takes place. We start off with 1020 .120 Wall DOM tubing which is one of the strongest materials available. Each kit includes the new Knuckle System that attaches to the factory roll bar, using a unique pivot and fastening point on one end and grade 10 fasteners on the other. Making it one of the strongest and the most solid mounts available for your Jeep. All of our cages were engineered to bolt-in and require no modifications to the vehicle to ensure a rock solid install while creating the strongest cage kit available. This item requires a $40 oversize fee for shipping.

Related

Reviews

3.7
3.0
get what you pay for..

The collars will not close. But you can get them tight with your own tools, the supplied are no good. They will strip and bend easily. If you follow the directions it will be ok. Only lacking in those would be the A pillar install. The backing hardware needs to be flipped and can be a pain. 2 people required to install or it will be very difficult. Another tip is to install every before you put it in the jeep. It will be easier in the long run.


from Portland Oregon |
4.0
Solid Construction-Tricky to install

Bought product because it included entire kit, provides more protection from side impact in the back seat and roll over protection, and was listed as "works with all factory hardware" or something like that. As it turns out, you have to cut part of the plastic away from you door surrounds and the plastic where the side support bars meet the windshield. Instructions say to install the bars with the grab handles before installing dash cross bar. DO this the other way around otherwise the dash bar will not fit. A heavy duty ratchet strap is highly recommended for all other cross bar installations. Also, when removing the bar covers, it helps to label the inside of the cover with FD, FP, RD, and RP to make reinstallation easier. Where it says that some modification to the roll bar padding and covers may be needed, what it means is you will need to do A LOT of cutting and the zippers are now useless. I recommend buying a small diameter grommet kit and a couple hundred feet of Para cord. You are going to want to hem sections you cut so they do not fray. It would be nice if the kit would come with additional bar covers to cover the stock bars as well as the roll cage bars. Over-all. Great product, just takes more planning than the product description lets on.


from Tatum, Texas |
4.0
Not Yet Available

As of 3/27/2012 this product is currently being reconstructed and wont be available until late Summer 2012 with no guarantee. This product is also incorrectly named "XRC" Cage Kit. It is actually "SRC" Cage Kit. I have Smittybilt bumpers on the front, rear, and sides of my jeep and am happy to say I am pleased with their durability and appearance. If this Cage Kit is constructed with the same amount of concern for safety as the rest of their products, it will definitely be worth it. But for now, I would call to find out when it will be available before ordering.


from Alabama |

Question & Answers

3 Answered questions

I have a 97 TJ with a full welded cage can I buy a clamp on 4 point harness bar ?

Asked by tj rocker from big bear lake on

Hello TJ, All of the harness kits we offer are bolt-on installations. They do require welded in threaded bungs as well. Thank you.

Answered by from big bear lake on

Hi I've a Jeep Wrangler 1997,I'm wondering if I might buy one part first of the roll over cage and then a second one.Can I buy it separately ??

Asked by Chilo from San Luis,Arizona. on

Thanks for the question Chilo, unfortunately this kit is manufactured, packaged and sold as a kit, we can not break it up for you.

Answered by lance from San Luis,Arizona. on

Hey guy's, I have a 2000 Jeep TJ Sahara. Basically it has the factory roll cage in it right now and I'm thinking of adding the 7 piece XRC Cage Kit. At this time it also has the factory sound bar in it as well, so I'm thinking that until I upgrade the stereo and eliminate the sound bar, I'll install everything but the "rear angle bars". Is it possible to install the front "top t-section" without installing the rear angle bars using only the material that is provided with the 7 piece Cage Kit? Thanks in advance for your help.

Asked by The Ricksta! from Castro Valley, Ca. on

Hello, the Ricksta, the Smittybilt XRC Roll Cage Kit, 1997-2006 Jeep TJ Wrangler & Rubicon, 7-Piece part# S/B76900 Can not be installed with your sound bar. You would either have to remove the sound bar or split the pods in half if that's possible. Thank you for your inquiry.

Answered by mikey from Castro Valley, Ca. on

Manufacturer

For 60 years Smittybilt has been fabricating aftermarket parts and today their products include Jeep tops, bumpers, lighting, winches and trail gear. Off-roaders count on the company's innovative parts like the original nerf bar side steps to equip their Jeeps for the trail and day-to-day driving. Pairing affordability without compromising quality is the hallmark of Smittybilt and the manufacturer's reputation carries over to products like its Overlander Series of tents, Adventure Boxes and SEMA award-winning magnetic trail skins for Jeeps. Smittybilt offers over 2,000 interior and exterior parts and accessories for 4x4s with multiple capabilities for jeepers of all levels. Shop Smittybilt Now

This Product Fits the Following:

  • 2006 Jeep Wrangler (TJ) Rubicon  
  • 2006 Jeep Wrangler (TJ) SE  
  • 2006 Jeep Wrangler (TJ) Sport  
  • 2006 Jeep Wrangler (LJ) Unlimited  
  • 2006 Jeep Wrangler (LJ) Unlimited Rubicon  
  • 2006 Jeep Wrangler (TJ) X  
  • 2006 Jeep Wrangler (TJ) 65th Anniversary Edition  
  • 2005 Jeep Wrangler (TJ) Rubicon  
  • 2005 Jeep Wrangler (TJ) SE  
  • 2005 Jeep Wrangler (TJ) Sport  
  • 2005 Jeep Wrangler (TJ) X  
  • 2005 Jeep Wrangler (LJ) Unlimited  
  • 2005 Jeep Wrangler (LJ) Unlimited Rubicon  
  • 2004 Jeep Wrangler (TJ) Rubicon  
  • 2004 Jeep Wrangler (TJ) Sahara  
  • 2004 Jeep Wrangler (TJ) SE  
  • 2004 Jeep Wrangler (TJ) Sport  
  • 2004 Jeep Wrangler (TJ) X  
  • 2004 Jeep Wrangler (LJ) Unlimited  
  • 2003 Jeep Wrangler (TJ) Rubicon  
  • 2003 Jeep Wrangler (TJ) SE  
  • 2003 Jeep Wrangler (TJ) Sahara  
  • 2003 Jeep Wrangler (TJ) Sport  
  • 2003 Jeep Wrangler (TJ) X  
  • 2002 Jeep Wrangler (TJ) SE  
  • 2002 Jeep Wrangler (TJ) Sahara  
  • 2002 Jeep Wrangler (TJ) Sport  
  • 2002 Jeep Wrangler (TJ) X  
  • 2001 Jeep Wrangler (TJ) SE  
  • 2001 Jeep Wrangler (TJ) Sahara  
  • 2001 Jeep Wrangler (TJ) Sport  
  • 2000 Jeep Wrangler (TJ) SE  
  • 2000 Jeep Wrangler (TJ) Sahara  
  • 2000 Jeep Wrangler (TJ) Sport  
  • 1999 Jeep Wrangler (TJ) SE  
  • 1999 Jeep Wrangler (TJ) Sahara  
  • 1999 Jeep Wrangler (TJ) Sport  
  • 1998 Jeep Wrangler (TJ) SE  
  • 1998 Jeep Wrangler (TJ) Sahara  
  • 1998 Jeep Wrangler (TJ) Sport  
  • 1997 Jeep Wrangler (TJ) SE  
  • 1997 Jeep Wrangler (TJ) Sahara  
  • 1997 Jeep Wrangler (TJ) Sport  

Promotions