A: I had this front bumper on my 1997 Wrangler TJ, and flat towed it with no problems. My longest trips were about 4 hours, and I drove VERY slowly and cautiously

A: Yes, the Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring (Black) - 76740D this bumper will allow you to tow the 1995 YJ. May need an adaptor kit from Demco.

A: I flat towed my 1997 Jeep Wrangler with this bumper. I have a different brand two-car set up, however.

A: Yes it can.

A: Yes, they are included.

A: The D ring shackles are included.

A: It only bolts on with one bolt. Not two like the factory bumper. Took a little work to cut the washers down too use as spacers under the tow hooks so it's kinda held on with two bolts. I've towed my tj several thousand miles and the bumper stayed attached.

A: Hello Boss Man, Thank you for asking. In order to get that information you will need to speak to Smittybilt direct. They can be reached at 888-717-5797

A: Hi Lost, This Smittybilt SRC Classic Rock Crawler Front Bumper with D-Ring Mounts in Matte Black power Coat does accept the Smittybilt Tow Bar. It fits the CJ's starting in '76. Thanks for your inquiry.

A: Hello Lost, The Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black powder Coat will fit your 78 Jeep CJ7. There are multiple hole locations. Thanks for the inquiry.

A: Bill, the Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black powder Coat is 55" long. The shipping box is 58". I hope this helps!

A: Jeeptrail, the Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black powder Coat weighs 40 pounds. I hope this helps!

A: Yes this works with the tow bar kit because it has the d ring mounts to attach it. Thanks

A: Robert, the Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black powder Coat doesn't have any holes drilled for a front plate. You will either have to drill holes or make a bracket to mount the plate to it. Hope this helps!

A: Jimbo, the Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black powder Coat doesn't have a direct bolt on grille guard available. You would have to do some fabrication work to make something work on this bumper. Hope this helps!

A: Hi Skinny The big determining factor in choosing the winch plate is the winch you plan to use.The flat winch plate S/B2803 will only work with the hawse fairlead and the roller fairlead will require the raised S/B2802 mounting plate. Thank you

A: Hello Scott, Thank you for the question. You will need the Smittybilt Winch Plate S/B2802.

A: Hello Trey, You will need to drill a few holes to install your fog lights on the Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black powder Coat S/B76740D. Thank you for the email.

A: Hello Joel, this Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black powder Coat is only a couple inches shorter than the stock bumper.It is 58" long. Thank you!

A: Hi Pete The Smittybilt XRC Front bumper S/B76800 weighs in at 62 pounds and the rear XRC bumper with tire carrier S/B76654 & S/B776653 weighs in at 169 pounds. The SRC front bumper S/B767400 weighs in at 40 pounds and the Rear SRC bumper with tire carrier weighs in at 122 pounds Thank you

A: Hi Matt the bumper is 58" long from ene to end Thank You

A: Ed- Thanks for your question. You can add a winch to your TJ Wrangler by using the Smittybilt Winch Plate you can find here http://jo.my/w761ay It is a bolt on part so you won't have to fabricate anything.

A: The SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black powder Coat does not have an optional bull bar.

A: The Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black powder Coat does not include the winch mounting plate or roller fair lead they are just there for aesthetic purposes.

A: Hi there! This SRC front bumper has the following dimensions : Length - 55" end to end Width - 7" from back to front at furthest d-ring point Height - 4.75"

A: Hello Austin! There are no holes provided on the top of the classic rock crawler bumper, so you will need to drill you own if you want to continue to use the OEM fog lights.

A: This bumper does not come with a winch plate. Smittybilt offers a variety of winch plates to fit your vehicle. Depending on your application, you may be interested in S/B2801 or S/B2802. Thanks!

A: This bumper does come with D-rings. They are not tow rated, but are meant to stand up to standard recovery use. Thanks!

A: Hello DK. This bumper will require a winch plate as there are no provisions for mounting a roller or hawse fairlead. Smittybilt offers several winch mounting plates specifically tailored for your Jeep. For TJ and YJ Wrangler, try S\/B2801. If you would like a raised mount specifically for TJ, try S\/B2802.

A: This bumper will require a winch plate as there are no provisions for mounting a roller or hawse fairlead. Smittybilt offers several winch mounting plates specifically tailored for your Jeep. For TJ and YJ Wrangler, try S/B2801. If you would like a raised mount specifically for TJ, try S/B2802.