Smittybilt Secure Lock Box - 2761

Specifications

  • Smittybilt | Part Number: S/B2761
  • Fitment:Direct Fit

PRODUCT OVERVIEW

Storage and security is the number one concern for all Jeepers and now you have an option with our all new storage vault for the Jeep Wrangler & Unlimited. Each box is manufactured out of 16 gauge cold rolled steel and is powder coated in Smittybilts signature series two stage black powder coat. The solidly built, the drawer supports up to 350 pounds, these high-grade steel slides offer smooth, quiet operation for some of your heaviest applications. A positive stop prevents drawers from accidentally rolling open, while the trigger disconnect allows for simple drawer removal. When you want the best in storage technology, look to Smittybilt to have your storage solution. Dimensions 35" W x 13" H x 30" L and 4.2 cubic feet of storage.

Related

Reviews

4.3
5.0
Good strong storage container

This is a good solid storage box needed in a Wrangler. I had to put a small piece of weatherstrip on the drawer to stop a rattle but that is no big deal. Bolts thru the floor with the bolts from the seat. Did have to push the box slightly to the right to clear the nader bolt, but again, no big deal...you won't notice it. Tie-down anchors integrated into to top helps with coolers,etc that needs to be secured.


from Boca Raton, Florida |
4.0
Very strong and handy box

Box is well made but rattles when going off road. Annoying, so going to try and put a different glide on drawer.


from Bullhead City, AZ |
4.0
Great Storage Box

I ordered this storage box on July 8 and due to backorders and it being shipped to the wrong address I received it in 4 months and 4 days. When the unit did arrive I was very pleased with the overall appearance and the opening handle and locking device was more than I expected. Very nice. I was very pleased to find that the unit bolts down to the jeep using the existing welded in nuts that did hold down the seat brackets. I wanted to leave the carpet in place so I had to go buy longer bolts. In order to bolt the storage unit in, the instructions state to take the drawer out and explains how to do it. That was easy. I was taken aback by at least 10 bolts, nuts, and washers that were all over, under the drawer. What came next was not so good, as I tilted the box into the back of the jeep part of the slide unit fall apart. I spent half an hour getting the plastic strip that contained round balls back into place. These rails are inside the box so they could not have been bumped. Taken the drawer out makes the unit lighter and I was able to lift it into the back of the jeep. I had to do a lot of pushing and shoving to get the box over so that the drawer would clear the jeep's tailgate latching post. All in all I am pleased with the unit. The drawer now contains all the supplies that use to be under the seats, behind the seats, and on the seats. Plus I have some room to spare. The drawback is no rear seat but we hardly ever used it. Well not true, we used it for our dog. I carpeted the top of the new box and now our dog has more room, a secure rug and can see out a whole lot better. Loading groceries is much easier now. We use to load them through the passenger side and lift them into the back seat. Now we open the tailgate and easily place them on top of the security box.


from Surprise, AZ and Colorado Springs, CO |

Question & Answers

8 Answered questions

I have a 2006 unlimited will the box fit with out removing or repositioning the back seat? Also how does the box attach to the body of the jeep!

Asked by Ed from Lakr Mary fl on

Hello Ed, You will need to move the rear seat to install this into in your vehicle.

Answered by from Lakr Mary fl on

Are the dimension list the the inside of the drawer or the outside of the box? (35Wx13Hx30L) if this is not the inside of the drawer please post the inside drawer dimensions. Thanks JC

Asked by JC from RC, CA on

Hello JC, The Smittybilt Secure Lock Box dimensions are from the outside of the box.

Answered by Dave from RC, CA on

How heavy is the unit the works with a 2002 TJ?

Asked by JC from RC, CA on

Hello JC Yes it will work with your 2002 Jeep TJ and it weighs in at 113 pounds.

Answered by Rody from RC, CA on

See all questions & answers

Manufacturer

For 60 years Smittybilt has been fabricating aftermarket parts and today their products include Jeep tops, bumpers, lighting, winches and trail gear. Off-roaders count on the company's innovative parts like the original nerf bar side steps to equip their Jeeps for the trail and day-to-day driving. Pairing affordability without compromising quality is the hallmark of Smittybilt and the manufacturer's reputation carries over to products like its Overlander Series of tents, Adventure Boxes and SEMA award-winning magnetic trail skins for Jeeps. Smittybilt offers over 2,000 interior and exterior parts and accessories for 4x4s with multiple capabilities for jeepers of all levels. Shop Smittybilt Now

Promotions