Smittybilt Front Tube Bumpers

A: Smittybilt 3" Tube Mounted License Plate Bracket (Black) - Part # S/B4430 or Rugged Ridge Tubular Bumper License Plate Bracket (Black) - Part # RUG11503.80

A: Sorry, black texture only.

A: Yes, this comes with (2) brackets. Please review the installation guide: https://www.4wheelparts.com/sku/Smittybilt/standard/JB48-FT.pdf

A: No - this is a Jeep bumper.

A: Hey Steve, the Smittybilt 3 Inch Front Tube Bumper with Hoop in Stainless Steel does not have d-ring mounts. Thanks for your question.

A: Hey Steve, the Smittybilt 3 Inch Front Tube Bumper with Hoop in Stainless Steel has two light tabs in the center of the hoop on top of the top lower bar. Thanks for your question.

A: Hi Tyler, This Smittybilt 3 Inch Front Tube Bumper with Hoop in Black Powder Coat does have a matching rear bumper, not sure what year Jeep you have but here's the one for the Wrangler's from '87 to '06 and thanks for your inquiry.http://www.4wd.com/Jeep-Bumpers-Jeep-Tire-Carriers/3-Rear-Tube-Bumper-with-Hitch.aspx?t_c=64&t_s=26&t_pt=3486&t_pn=S%2fBJB44-RH

A: Hello Jeff, We offer a plain cap part number RUG11525.01 that will fit the Smittybilt 3 Inch Front Tube Bumper with Hoop in Black Powder Coat. Hope that helps.

A: Hey Bryanw0087, the Smittybilt 3 Inch Front Tube Bumper with Hoop in Black Powder Coat has plastic end caps. Thanks for your question.

A: Hi Rebekah The 3" Double Tube Front Bumper with Hoop is not drilled for license plate. Smittybilt makes a bracket S/B4430 to mount the license plate to. Thanks

A: Hi Steele88, This Smittybilt 3 Inch Front Tube Bumper with Hoop in Black Powder Coat has the light tabs welded in place, so you won't need any additional light mounts. Great question, thanks for your inquiry.

A: Hi Steve, This Smittybilt Front Bumper with Hoop in Stainless Steel uses a licence plate mount specific to this tubular style, here it is and thanks for your inquiry. http://www.4wd.com/Exterior-Parts-Car-Care/License-Plate-Bracket.aspx?t_c=3&t_s=21&t_pt=6256&t_pn=S/B4430

A: Hey Jeremy, the Smittybilt 3 Inch Front Double Tube Bumper with Hoop in Textured Black Powder Coat will use any fog light but no aftermarket light will be a direct plug in to the OE wiring. Thanks for your question.

A: Smittybilt Tubular Jeep Bumper in Textured Black Powder Coat Hi Tom, This bumper has end caps, but they are plastic and not welded. It does not have light taps, however our bumper with the hoop has the light tabs. Here it is and thanks for your inquiry! http://www.4wd.com/Jeep-Bumpers-Jeep-Tire-Carriers/3-Front-Tube-Bumper-with-Hoop.aspx?t_c=64&t_s=26&t_pt=6410&t_pn=S%2fBJB44-FT

A: Thanks for the inquiry Jacob, the Smittybilt 3 Inch Front Tube Bumper with Hoop in Black Powder Coat part # S/BJB44-F this bumper has 2 tabs to mount lights.

A: Hi Austin, This Smittybilt bumper measures 54" across. Thanks for the inquiry!

A: Hello Zach, Yes sir you are correct. These bumpers are the same textured black finish. Thanks for your question.

A: Hey Ak, the Smittybilt 3 Inch Front Tube Bumper with Hoop in Black Powder Coat has a weight of 35 lbs. Thanks for your question.

A: Hi Rick, This Smittybilt front tubular bumper has built in light tabs for the lights, so yes you can still use your factory fog lights. Thank you for the inquiry.

A: Hello, You would use a raised winch plate for 97-06 jeeps and 87-95 use a standard plate. If you have anymore questions feel free to ask, Thank you.

A: Hello, You can mount the factory tow hooks back to the frame and use those. If you have anymore questions feel free to ask, Thank you.

A: Hello Mike, the Smittybilt 3 Inch Front Double Tube Bumper with Hoop in Textured Black Powder Coat will interfere with the factory tow hooks. Thank you for your inquiry.

A: Hi Newb, This bumper requires no drilling and mounts to the same location and holes as the original bumper so there are no instructions. Thanks for the inquiry!

A: Hello, The Smittybilt Tubular Jeep Bumper in Stainless Steel does come with light tabs attached. Please let us know if you have any other questions. Thanks!

A: Austin- Thanks for the question. For a Wrangler you don't mount a winch to the bumper you would mount it to a winch plate on top of the frame behind the bumper. You can find them here http://jo.my/8jr1di

A: Justin- Thanks for the question. The Smittybilt 3 Inch Front Double Tube Bumper with Hoop in Textured Black Powder Coat does not have a provision for a winch mount. One can be mounted but due to the placement of the tubes you will need to do some custom fabrication.

A: Mike the Smittybilt 3 Inch Front Tube Bumper with Hoop in Black Powder Coat is 54" wide and 18" tall. I hope this helps!

A: Mcgee19D, the Smittybilt 3 Inch Front Double Tube Bumper with Hoop weighs about 44lbs. The matching rear bumper weighs in at 41 lbs. I'm not sure exactly the weight of the factory bumpers but I would guess about 20 lbs per bumper. If you have any other questions please feel free ton give me a call at extension 939. Thanks a lot!

A: Hi there! This double tube bumper doesn't have a location to mount the factory fog lights. Virtually any fog light will work if you have a bracket, and we carry many types of brackets for tube bumpers. Here is a link, but make sure you only choose products for 3" tubes : http://jo.my/tube_bumper_light_mounts

A: Stratt10, this Smittybilt 3" Front Tube Bumper with Hoop does have the tabs for hooking up fog lights. Both of your factory 6" or 7" lights will fit on this bumper with no issues.

A: Hello Gary, this Smittybilt Tubular Jeep Front Bumper is made out of 304 marine grade highly polished stainless steel with a mirror finish. It is .120 wall thickness. Thank you!

A: Sorry for the confusion. Each Smittybilt 3" Front Tube Bumper with Hoop has a different finish. S/BJB44-F is gloss black, S/BJB44-FS is stainless steel, and S/BJB44-FT is textured black. I hope this information is helpful. Thanks!

A: This Smittybilt 3" Front Double Tube Bumper with Hoop does not have provisions to mount a license plate, but Smittybilt offers a bracket to mount your license plate. You can find it here: http://jo.my/liscense_plate_bracket Thanks!

A: Andrew, yes this Smittybilt Tubular Jeep? Bumper has 2 tabs for aftermarket lights.

A: Hello, Yes you bolt a winch on with this bumper. Use the Smittybilt Winch Plate #S/B2804 $149.99 it bolts on to the frame rails behind the bumper. You can see it here.http://www.4wd.com/Jeep-Winches-Jeep-Winch-Accessories/Winch-Plate.aspx?t_c=18&t_s=126&t_pt=3440&t_pn=S%2fB2804

A: Yes the Smittybilt X2O Winch will work with this bumper. You will just need to purchase a winch mounting plate to mount the winch.