A: Vertical height is 6 inches, maybe a tad over but use 6" as your guide. As far as the clamps, if the ones you are looking for are the ones that come w the gutter mount then those are ~3" or so.

A: Minimum 3-3/8” Maximum 4-3/4”

A: Smittybilt Rain Gutter Clamps for Defender Rack Roof Rack - Part Number: S/BHD-6 (QTY: 6) | Smittybilt Adjust-A-Mount Defender Rack Mounting Kit - Part Number: S/BAM-6 (QTY: 6) | Smittybilt Heavy Duty Rain Gutter Clamps for Defender Rack Roof Rack - ** Part Number: S/BHDS-4 (QTY: 4)

A: Multiple the dash and quantity i.e. S/BHDS-4 (QTY: 4) or S/BHD-6 (QTY: 6)

A: Yes they make this model of bracket for all van gutters

A: The bracket kits do not have a stated rating, all defender racks/baskets have a 150lbs rating.

A: It is adjustable from 3 to 5 inches.

A: That is just a bolt we used to prop up the part to take a photo.

A: Brackets for what? We have DS31-4 brackets for a 45454 rack for hardtops.

A: The bracket kits do not have a stated rating, all defender racks/baskets have a 150lbs rating.

A: Yes they will

A: Hi Randy the Smittybilt Rain Gutter Clamps for Defender Rack Roof Rack are just the clamps for the rack. They are 6 in from bottom of the clamp to the top of the bracket. If you have any other questions feel free to ask. Thanks,

A: Thanks for the inquiry Todd, the Smittybilt Rain Gutter Clamps for Defender Roof Rack part # S/BHD-6 we only sell these in the kit part #'s.

A: Hello Shaft, No, this will not fit your vehicle. The correct part number is S/BAM-6. Thank you.

A: Hi James The S/BHD6 is a 6 position mounting kit. It is designed to clamp onto a rain gutter. I do not believe your Dodge has a rain gutter that will accept this type of mount. You will need a S/BAM6 mounting kit. This kit will have brackets that are of a hinge type that can work with the angle at the outer edged of the roof. Each bracket is mounted with 2 well nuts that are installed in the roof. The roof must be drilled for the well nuts to be installed. On the Dodge there should be enough room to drill the holes with out dropping the headliner if you are careful. Thank You Jon Snyder 4Wheelparts

A: Hello Jim, the Smittybilt Rain Gutter Clamps for Defender Roof Rack part# S/BHD-6 will fit any vehicle with factory rain gutters. Thank you for your inquiry.

A: Hello Jim, Thank you for the question. According to Smittybilt this will not fit your vehicle application.

A: Hello Rich, Thank you for the question. You will need the Smittybilt Adjust-A-Mount Defender Rack Mounting Kit Part Number: S/BAM-6

A: John- Thanks for the question. These Smittybilt Defender rain gutter clamps will work with your Scout II. You may need to modify the bolt pattern on the Con-Ferr rack to match the mounts.

A: Albert- Thanks for the question. The correct Smittybilt rain gutter clamp for mounting a Defender roof rack on your 1997 Toyota Land Cruiser can be found here http://jo.my/e1xeyb

A: No this Smittybilt Rain Gutter Clamps for Defender Roof Rack mount will not work with your 1978 e350 ford van. You will need these http://jo.my/sbhd-8