A: Try McMaster Carr. Source it yourself or maybe get lucky at ACE or Grainger

A: The Smittybilt 54" Trail Jack - 2722 weighs 37 lbs.

A: Maximum rated load 4,660 lbs

A: No, overseas. Try the PN: H/LHL-484

A: The XRC Gen 2 bumper doesn’t have any mounts for a trail jack. However, the XRC Gen 2 tire carrier does come with mounts for the trail jack.

A: Oliver BR, the Smittybilt 54" Trail Jack weighs 37 pounds, and the dimensions are 56x8x6. Thanks for the question!

A: Joe, the Smittybilt 54" Trail Jack does not come with any accessories shown. If you would like to purchase the isolator separately, you can find them here: http://www.4wd.com/eSearch.aspx?Ntk=primary&Ntt=jack+isolator. I hope this helps!

A: Hello, The Smittybilt 54" Trail Jack has a lot of uses other than lifting vehicles. Many of us here have used it to pull post and the sort out of the ground. Just keep in mind to wear the proper safety attire and make sure the jack does not lean under load. Please let us know if you have any other questions. Thanks!

A: Redjeepsrule, the Smittybilt 54" Trail Jack doesn't work with the jack base since it has a larger foot print as it is. As for the Jack Mate it will work just fine!

A: Russ, The Smittybilt 54" Trail Jack can technically be used in the receiver as long as the front wheels are chocked correctly. Unfortunately there is no specific adapter to use in the receiver. Please let us know if you have any other questions. Thanks!

A: Bob, The Smittybilt 54" Trail Jack has a 4660lb capacity for vertical lift due to all of the weight being supported by the jack itself where as using as a winch there is no direct load on the jack so it is able to handle the strain better and safer. Please let us know if you have any other questions. Thanks!

A: Hello Justaguy, We suggest the Smittybilt Intelligent Rack (I-Rack) Platform Part Number: S/B2740-01 and Smittybilt Jack Mount Part Number: S/B2740-03. Thank you.

A: Hello No they are a little different and don't interchange. If you have had the jack for less than two years it is covered under warranty. call (310)762-9944

A: Sir, here are some part# H/LHM-825, W/I1540, AEEACETJHM. these are all hood mounted brackets for the TJ. Thank you for your question.

A: Hello Esteban, the Smittybilt 54" Trail Jack part# S/B2722 will work on your 91 Suburban. Thank you for your question.

A: Hello It depends on how much droop your suspension has. I would try jacking it up by the bumper with a floor jack and block. See how high you have to go before the wheel comes off the ground. If it is higher than 54 inches you can put a strap around the axle to the frame and keep it from drooping as much.

A: Hello Alex, the Smittybilt 54" Trail Jack part# S/B2722 will work on your 02 ford f-250. Thank you for your question.

A: Hello there, the Smittybilt 54" Trail Jack will work with a factor bumper of 2013 jeep wrangler sport. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello Sue, The Smittybilt 54" Trail Jack will work with your 95 Suburban.

A: Hello old goat from texas and thank you for the inquiry on the Smittybilt 54" Trail Jack. This product is comparable to the Hi-Lift brand, IF NOT BETTER ! Feel free to order with this link: http://jo.my/fii0vz.qrcode

A: Hello Dave and thank you for the inquiry on the Smittybilt 54" Trail Jack. This product is made in China. Here is the link to get back to the ordering page: http://jo.my/fii0vz.qrcode

A: Hello James and thank you for your question! Smittybilt 54" Trail Jack has a max lift height of 50".

A: Hi Ron Yes the top hook will unbolt on the 54? Trail Jack. Thanks

A: Hello, This jack weighs 35 pounds. If you have anymore questions feel free to ask, Thank you.

A: Blake, The Smittybilt 54" Trail Jack will work with the Smittybilt IRACK system. Thanks, Don

A: Lacscam- Thanks for the question. The Smittybilt 54” Trail Jack does not come with the handle isolator.

A: Hey Daniel, the Smittybilt 54" Trail Jack comes in black and gray as shown it the picture. Please let me know if you have any other questions, thanks.

A: JJ McCullough- Thanks for the question. You can use any Hi-Lift jack mount with the Smittybilt 54" trail jack

A: Hello! I'm afraid that no mounting hardware comes with this trail jack. We do have hood mounts available, you can find them here : http://jo.my/hood_hinge_mount_kits

A: The Smittybilt 54? Trail Jack can be mounted in any location using any hi-lift style jack mount. I hope this information is helpful. Thanks!