Skyjacker Track Bar Assembly

A: I have not been able to get the adapter to fit on my 1999 3/4 ton 4x4.I’m waiting to hear back from Skyjacker support. Also the track bar they sent has a bend in it and the ones in the website picture are straight. I am not sure they sent me the right kit… The center hole length is 39 inches screwed all the way in and 39 1/2 inches when at the factory recommended maximum length (1/2 inch of thread showing past the jam nut). The instructions indicate you can cut up to 1/2 inch off the track bar if needed. I would try to get any more information directly from skyjacker. Good luck a half inch off of the track bar if it needs to be shorter.

A: This is the information the MFG offers - Track Bar Assembly; Adjustable; For 4-7 in. Lift | 94-01 Dodge Ram 1500, 2500, 3500 4WD

A: No - Skyjacker says this fit YJ's with 6" lift.

A: Fits 6-8” lifts

A: Hello 7.3guy, Sorry, this will not fit that height. Its designed for 4" to 8" of lift. Thank you.

A: Hello DJ, A Jeep TJ Wrangler with a 2" lift does not require a drop pitman arm. Only when the lift is taller than 4" will it require one and that only depends on the suspension design. Sound to me like you either have a ball joint issue, bad unit bearing or not enough caster in the front axle. Id suggest checking all three prior to purchasing more parts. Thank you.

A: Call skyjacker if they say you can they will give you a part number to order them. I don't show any parts numbers for just these parts in their catalog. But call them I bet they can make something happen. Skyjacker 318-388-0816

A: Hello Kenny, Thank you for asking. Unfortunately we do not have that information. You will need to contact Skyjacker to get those specs. (318) 388-0816

A: Jerry- Thanks for the question. The Skyjacker Adjustable Track Bar will fit a lift kit of between 6 and 8 inches on your 95 jeep wrangler.

A: Matt- Thanks for asking. Yes the Skyjacker Adjustable track bar includes the steering dampener as picture