Skyjacker Sway Bar Extended End Links

A: Please give us a call 877-474-4821, we need a little more info.

A: Sway Bar Extended End Links; Lift Height 5-8 in. Fits 1999 Ford F-350 & F-250 Super Duty 4WD GAS

A: I sold the truck I put them on…2000 Silverado with 4 inch lift, but do remember them being pretty short to the point I had to jack the wheel up to get the bolt through the bottom arm and nut on.  

A: Part # C766SBL – Sway Bar End Link Pair GM : Sway Bar End Link Pair; Includes Bushings | 07-18 GM 1500 4WD – 4-6 in. Lift | 01-10 GM 2500 HD / 3500 HD 4WD – 3 in. Lift | 99-06 GM 1500 4WD – 3-4 in. Lift | 00-06 GM Avalanche / Tahoe 1500 4WD – 3 in. Lift.

A: Yes, 07-18 GM 1500 4WD – 4-6 in. Lift

A: Sway Bar Extended End Links; Lift Height 3 in. – 4 in.

A: I believe they did. I don't recall having to purchase additional hardware for my 2004 Excursion. I have a total of approximately 6" of lift with 18" wheels and 33" tires. I went with an ATS Springs package which was about 5". The sway bar extension appears to be lower than I needed. I cannot currently provide photos.

A: No they will not work.

A: Per Fabtech Install instructions: FT44040BK Sway Bar End Link Frt. Drv FT44041BK Sway Bar End Link Frt. Pass

A: Yes these are for 6" lifts.

A: It depends on your vehicle. You might want to call Skyjacker to see what they have available for your lift and your vehicle 318-388-0816

A: Yes, these will work on your vehicle.

A: Too long. These are for 6" lifts. C766SBL are for 3-4" inch lift. Or please call our sales line toll free at 1-877-474-4821

A: Do not know what length the Skyjacker links are and/or which kit style they fit. Depending on which Pro Comp 2500HD kit you have: K1051B – Drop Bracket kit, end link 91-6100B (Pair) K1084B- Knuckle kit, end link 91-8018 (2 required)

A: These only fit 3-4" lifts

A: This is just one. Sold individually.

A: Product dimensions: 22 x 6 x 3.4 inches

A: You would need part number C966SBL https://www.4wheelparts.com/p/skyjacker-sway-bar-extended-end-links-c966sbl/_/R-BHNG-C966SBL

A: Unfortunately no, these extended sway bar links are designed for the following trucks with 6" lifts. 07-17 GM 1500 4WD 01-10 GM 2500 HD / 3500 HD 4WD 99-06 GM 1500 4WD 00-06 GM Avalanche / Tahoe 4WD 02-10 Hummer H2 4WD 97-03 Ford F-150 4WD 06-15 Ram 1500 4WD

A: No, the Skyjacker Sway Bar Extended End Links - C766SBL would only work up to a 3" lift for your vehicle application.

A: Hello Delattre, Yes part number SKYSBE502 is sold as a pair. Thanks for your question.

A: Hello, These part #SKYSBE502 are sold as a pair. thanks for your question.

A: Hello Barrie, These Skyjacker Sway Bar Links are 10 3/4 inches eye to eye. If you have anymore questions feel free to ask, Thank you.

A: Hello Todd The SKYC966SBL-S sway bar end link kit is 11 inches from top mounting seat to lower mounting area between the lower bushings. This will match your 6 inch lift perfectly. These Skyjacker end are excellent quality and have a swivel pivot at the top. Thank You for your question. Jon Snyder 4Wheelparts

A: Hello Jerad, Yes, this will fit your vehicle application. Thank you

A: Hello Jay, Sorry, this only fits the 1999 to 2009 GM & Hummer 1500 vehicles with 6" lift. We currently do not offer an link for you.

A: Hello truck, The Skyjacker Sway Bar Extended End Links SKYC966SBL-S only fit the 1999 to 2009 GM 1500 Truck and SUV's. Thank you.

A: Hello kwtrucker, Yes, the Skyjacker Sway Bar Extended End Links will fit your vehicle application. Thank you.

A: Hello cp3, The Skyjacker Sway Bar Extended End Links are sold as a pair. Thank you.

A: Todd, You will have to ask Rough Country we don't sell that brand and don't have that information on hand. Thank you for the question.

A: hello bowler14, Yes, the Skyjacker Sway Bar Extended End Links will fit your vehicle application.

A: Hi KS, These extended end links from Skyjacker measure approximately 10" from eye to eye. Thanks for the inquiry.

A: Mike, that is for a 6" lift only and one side. thank you for your question.

A: I would recommend staying with the fabtech sway bar links we can get you those. Skyjacker doesn't give us the length on these they just tell us its for their 6" lift kit.

A: Hello Jessica and thank you for your question! Skyjacker Sway Bar Extended End Links are made for your 2008 Chevy Silverado.

A: Hello Jim, Thank you for asking. Unfortunately Skyjacker does not provide the overall length measurement in their catalog. It only specifies for 2-4 inch lifts

A: Hello Elkhunter, Thank you for asking. The Skyjacker Sway Bar Extended End Links will work with your 4" lift.

A: Hello chevymike and thank you for your question! Skyjacker Sway Bar Extended End Links part number SKYC966SBL is the correct sway bar links for your 2005GMC 2500HD.

A: Hello Chevymike, These Skyjacker Sway Bar Extended End Links are the correct part # for your truck with a 6" lift.

A: Dillon- Thank you for your question. The Overall length on the Skyjacker Sway Bar Extended End Links is 17 inches and 15 Inches eye to eye.

A: Hello Dillon, The Skyjacker Sway Bar Extended End Links will work if you have a 3-4"lift kit.

A: Mr. Matt- Thank you for your question. The Skyjacker Sway Bar Extended End Links will fit your 2004 f250 with a 6 inch lift. Your track bar should sit paralle with the ground normally. Popping noise can be quite a few things when dealing with a lifted truck. Make sure your track bar end and steering links are in good condition.

A: Hello Ken and thank you for the inquiry on the Skyjacker Sway Bar Extended End Links. This part number will not fit your vehicle. Skyjacker part #SKYSBL40 is the correct part number for the Skyjacker sway bar lowering kit.

A: Thanks for the inquiry tony, the Skyjacker Sway Bar Extended End Links part # SKYC966SBL what you want to use in skyjacker is part # SKYSBE5069

A: Hello ss and thank you for your question! Skyjacker Sway Bar Extended End Links is to be used with a 6" lift.

A: Hello They say the length between bushings is 9.75 inches.

A: Hello Johnny and thank you for the inquiry on the Skyjacker Sway Bar Extended End Links. No these will not fit your 2002 Ford Ranger. Skyjacker does not make this product for your vehicle. You will have to find a SUPERLIFT distributor to order your parts from.

A: Hello never mind and thank you for your question! Skyjacker Sway Bar Extended End Links part number SKYSBE502 are the correct links for your 2007 Wrangler.

A: Hello Stoey and thank you for the inquiry on the Skyjacker Sway Bar Extended End Links. Yes, they will fit your 1998 Jeep TJ with a 2.5" lift and they do come with the bushings as well. Here is the link to get you back to the ordering page: http://jo.my/8e4c4c.qrcode

A: Hello Josh, This Skyjacker Sway Bar Extended End Links are correct for your year truck with a 6" lift and these are for the front.

A: Hello Mike and thank you for your question! Skyjacker Sway Bar Extended End Links part number will work for your K3500.

A: Hello Justin, Thank you for asking. The Skyjacker Sway Bar Extended End Links are 10 inches long.

A: Hello Shawn and thank you for your question! Skyjacker Sway Bar Extended End Links are for up to 6" of lift.

A: Hello Kelly, These Skyjacker Sway Bar Extended End Links are made for a 6" lift for a 1999--2006 Chevy Silverado. These are the only ones Skyjacker offers.It is possible you have a smaller lift but if you can trim these down to make them work they will be fine.

A: Hello Eric, Thank you for asking. The Skyjacker Sway Bar Extended End Links part# SKYC966SBL are for a 6" lift. You will need quantity (2) of part# C766SBL-S. They are not listed on our websiteso please feel free to call in our sales department to get a price.

A: Hello J. This Skyjacker Sway Bar Extended End Links are correct fo your year truck.; These fit the 1/2 ton Chevys from 1999-2006.

A: Cade, thank you for your inquiry on the Skyjacker Sway Bar Extended End Links. Yes, this product will work with your 6" lift. please follow this link to get back to the order page: http://jo.my/e3ju8t.qrcode

A: Hello Yes they will work on your C1500 truck.

A: Thanks for the inquiry myke, the Skyjacker Sway Bar Extended End Links are approximately 10 inches and for use with a 6 inch lift.

A: Hello there, the Skyjacker Sway Bar Extended End Links SKYC966SBL-S will not work for your truck. After 1997 the company's we carrier do not show any listing for a 2000 Ford Ranger.

A: Hoover0309 from Ohio, Thanks for the question.Part #SKYC966SBL is not the correct part # for your 03 ram 2500 diesel 4x4.Sky Jacker does not offer sway bar extended links for your application.Sky Jacker uses part #SKYSBL20 and this is a lowering bracket.

A: Hi Alyssa Skyjacker Sway Bar Extended End Links, SKYHR20SBL. These end links will not fit you vehicle. You will want to order SKYSBE120. (for a 2"- 4" lift on vehicle) Thanks for the question.

A: Hello Ben, Yes, this Skyjacker Sway Bar Extended End Links will fit any 1997-2003 Ford F-150 with a 6" lift.

A: Tbones- Thanks for the question. The Skyjacker Sway Bar Extended End Links will fit your 2004 1500 sierra with 6 inch lift.

A: Hello Tom, the Skyjacker Sway Bar Extended End Links part# SKYC966SBL-S is designed for vehicles with skyjackers 6" lift. For technical specs on this link please contact skyjacker direct at 318-388-0816. Thank you for your inquiry.

A: Jake- Thanks for the question. The Skyjacker Sway Bar Extended End Links will not fit your 05 GMC Canyon with 2.5 inches of lift. The Sway bar end link that will fit are the energy suspension 9.8169G. They are special order, please call 800-257-5629 to speak to a sales associate.

A: Matt- Thanks for your question. The differance between the SKYC966SBL-S and the SKYC966SBL is -s is sold individually.

A: Hello donjon, Thank you for the question. The Skyjacker Sway Bar Extended End Links Part Number: SKYC966SBLwill fit your vehicle application.

A: Hello Conway, Thank you for the question. Yes, this will fit your vehicle application. The are some single.

A: Hello Kip, Thank you for the question. Yes, the Skyjacker Sway Bar Extended End Links will fit your vehicle application.

A: Ray- Thanks for the question. The sway bar end links, Skyjacker Sway Bar Extended End Links SKYSBE402 will be to short. The links that you will need are SKYSBE303.

A: Boss- Thanks for the question. The Skyjacker Sway Bar Extended End Links are for GM applications. I would recommend the Tuff country T/C30927 kit for your 94 dodge ram 12 valve.

A: Hi Dave! Center to center, these links measure 11 inches from hole to hole.

A: Lilman- Thank you for your question. The Skyjacker Sway Bar Extended End Links will work with a 6 inch lift on your 03 Chevy Tahoe with an 6 inch RC lift.

A: Utah- Thank you for your question. The Skyjacker Sway Bar Extended End Links will work with most 6 inch lift kits with out sway bar drop brackets.

A: Dave- Thank you for your question. The Skyjacker Sway Bar Extended End Links will work for your 06 Chevy 2500 with a 6 inch lift.

A: SC- Thank you for your question. If your have a north south connection on your truck, then these should work. The Eyelet design will allow you to have more articulation with out binding. North south can shear at high articulation. You can convert to eyelet with these adapters, http://jo.my/g42gz8 look at the end of the sway bar link.

A: SC- Thank you for your question. The Skyjacker Sway Bar Extended End Links will not fit your 08 Ram 1500 with a 6 inch lift. The Sway bar end links that will work for your truck can be found here http://jo.my/jizzmw

A: Felchie- Thank you for your question. The Skyjacker Sway Bar Extended End Links are designed for a 6 inch lift and will be to long for your leveled truck, they will contact the upper control arms. Your tie rod ends shouldn't be contacting the sway bar links at any time. I would recommend that you have your truck looked at by a qualified mechanic.

A: Hello Stellina, Thank you for the question. The Skyjacker Sway Bar Extended End Links SKYSBE500 are designed for a 1997 to 2006 Jeep TJ Wrangler.

A: Hi DJ These bars will not fit your 1990 Chevrolet. I do not see a set of of the shelf end links that will fit your truck. Most lift kits for your truck are 6" and you flip the bar over to drop the ends to fit your kit. The other option is to cut the factory links in half and insert the ends in to a piece of steel tubing and weld them in place. Thank You

A: Hello Gustavo, Thank you for the question. The Skyjacker Sway Bar Extended End Links SKYHR20SBL are sold as a pair.

A: Rene- Thanks for the question. The difference between the two Skyjacker end links is the application.

A: Hello FREEBIRD, The Skyjacker Sway Bar Extended End Links skyc966sbl-s will help eliminate excessive body roll for smoother handing on and off-road. I would check all of the tie rod ends in the front of the vehicle. Thank you for the email.

A: The Skyjacker Sway Bar Extended End links are sold in pairs.