Skyjacker Softride Coil Spring

A: The 6” suspension is not designed to handle 7-8” coils. If 8” coils are installed with 6” drop brackets, the vehicle will not be align-able.

A: Fits the factory coil buckets on the Ram.

A: Yes they will

A: Hey Leo, Yup these coil springs will get the job done, Thanks

A: Thanks for the inquiry john sheer, the Skyjacker 8 Inch Lift Softride Coil Springs part # SKYTJ80R these are specific to a Wrangler TJ, we don't know if they will work on any other vehicle.

A: Thanks for the inquiry Brett Avid. the Skyjacker 2 Inch Lift Softride Coil Springs part# SKYD20 these will give a 2 inch lift normally to the vehicle.

A: Hello Tot202, To regain caster you will need to install the Synergy Manufacturing Front Upper Control Arms Part Number: SYN8553-01 and the Synergy Manufacturing Fixed Front Lower Control Arm for Dodge Part Number: SYN8563-01. Thank you.

A: Todd, correct coils for this truck. Front shocks part# RS5221 rear shock # RS5262 thank you for your question.

A: Sir, these coils are intended for the Ford explorer and have nothing available for the Ford Courier. thank you for your question

A: Sir, any more than 2.5" lift and you will need track bar brackets. thank you for your question.

A: Hello Pete, Thank you for asking. The Skyjacker 3 Inch Lift Softride Coil Springs part# SKYGC20R are for the rear. If you are looking for the fronts you'll need part# SKYJC30F

A: Thanks for the inquiry Country boy, the Skyjacker 2.5 Inch Lift Softride Coil Springs part # SKYD30 these will fit a 2000 RAM 1500 4X4.

A: Hello Billy The JC80F coil is for a Jeep Cherokee. The coils you need for your Bronco are part number SKY 188 These will work with your kit and 351 motor.

A: Thanks for the question. Skyjacker 2.5 Inch Lift Softride Coil Springs This is just going to be the springs The full kit is going to be this part # D2512K-H this comes with shocks, control arms and add a leafs. You want to order this kit D2512K-H

A: Hello Joel, What is the year, make and model vehicle you are installing this on?

A: Hello, the Skyjacker 2.5 Inch Lift Softride Coil Springs part# SKYD25 does not require anything else other than an alignment. If you go any higher on the factory suspension you will need a track bar bracket and sway bar links. Thank you for your questions.

A: Jenna,Thanks for the question.The only thing that is recommended is new shocks.They are not mandatory.If you need help with shocks please call in we can help.

A: Hello jay and thank you for your question! Skyjacker 8 Inch Lift Softride Coil Springs would need the radius drop brackets that come up when you enter the year, make of your Super Duty.

A: Thanks for the question. Skyjacker 7 Inch Lift Softride Coil Springs skyjk60r With the 6" lift springs they are designed for the4 door model and the 2 door model you will get a little more lift. If you want 6" of lift you will want to order the 6" lift spring for your 4 door model. If you are running a larger bumper and winch on the Jeep you might want to order a lager spring or a coil spacer to cover the extra weight of the Jeep. Thank you Answer box sales

A: Hello Ale, Thank you for asking. The Skyjacker 8 Inch Lift Softride Coil Springs are the coils only, not the complete 8" lift. If you had a full 8" lift you will be able to run 35"x12.50" here are some 8" lift options http://jo.my/akff2t

A: Thanks for the inquiry heather, the Skyjacker 3 Inch Lift Softride Coil Springs part # SKYD45 have a limited lifetime warranty, if they are defective from the factory they are covered, if they ever sag that would be under warranty replaceable from the manufacturer..

A: Hello Dan, the Skyjacker 10 Inch Lift Softride Coil Springs part# skytj90f weigh in at 22lbs each and sit at 21" long, Thank you for your inquiry.

A: John- Thanks for the question. The Skyjacker 3 Inch Lift Softride Coil Springs are part of the kit SKYLIB258K. The front springs only come in the kit with the rears.

A: Thanks for the inquiry No nickname, the Skyjacker 4 Inch Lift Softride Coil Springs part # SKY174 for a early ford will be able to clear up to a 35 inch tall tire.

A: Nate- Thanks for the question. The skyjc30f front coil springs will give you the 3 inches of lift with the 5.2 V8 in your grand cherokee.

A: Hello thatoneguy, Thank you for the question. Provided this coil spring fits your vehicle application. Yes.

A: Rudy- Thank you for your question. The Skyjacker 4 Inch Lift Softride Coil Springs measure 22 inches at static unload.

A: Gadman- Thank you for your question. The Skyjacker 3 Inch Lift Softride Coil Springs will fit your 96 jeep grand cherokee.

A: Hello MoparMan, Thank you for the question. Free length is 18.30"

A: Hello Gerret, Thank you for the question. The Skyjacker 2.5 Inch Lift Softride Coil Springs Part Number: SKYD25 will lift the vehicle 2.5 inches.

A: Scooby- Thanks for your question. The Skyjacker 2.5 Inch Lift Softride Coil Springs part number sky30 does not fit your 01 dodge 3500 cummins 4x4. The coil springs you will need for your application can be found here http://jo.my/7j35ca

A: Thank you for your question. Yes the Skyjacker 2.5 Inch Lift Softride Coil Springs part number SKYD30 will work with your factory shocks but if you have over 70k on the shocks I would recommend to change/upgrade your shocks.

A: Hello team_kj, Yes, adding the Skyjacker 2.5 Inch Lift Softride Coil Springs SKYLIB25R can be used with your application. Thank you for the email.

A: Hello Roy, Yes, the Skyjacker 4 Inch Lift Softride Coil Springs sky174 will fit your vehicle application. Thank you for the email.

A: Hi Joe Skyjacker does not publish theyr spring free standing heights and are closed for the holidays. I will try to contact them next week and get back to you next week Thank You