Rugged Ridge Lift Kits

A: This kit uses spacers and can be used on any 1999-04 Grand Cherokee.

A: This does in fact include front and rear shocks.

A: We do not sell any lift larger than 5.5" for the Grand Cherokee.

A: Hi bajaman83, For the Rugged Ridge 2 Inch ORV Budget Lift Kit there are many shocks that can be used. We sell many different brands in lengths that will accommodate the lift. If you contact our customer service center @ 877-474-4821 they can guide you into the right shock for your application

A: Thanks for the inquiry Theron, the Rugged Ridge 4 Inch ORV Suspension Lift Kit part # RUG18401.41 4WP does not have this in stock.

A: Hello mkeathb, That is the correct part number for the front and rear Bilstein 5100 series shocks to fit this kit. Thank you.

A: Hello keathb, We suggest the part number PXA5041-7973 with this kit. Thank you.

A: Mike from Michigan,Thanks for the question.One thing we recommend is a drive shaft & a slip yoke and you will be ready to go.

A: Hello JeepAholic from Martinez, CA and thank you for the inquiry on the Rugged Ridge 2 Inch ORV Budget Lift Kit. This part number contains (2) 2" spacers and (4) nitrogen shocks. Here is the link to get back to the ordering page: http://jo.my/ug5ak4.qrcode

A: Hello Rocky, The Rugged Ridge 2.5 to 3.5 Inch ORV Suspension Lift Kit or the Procomp 4"stage 1 will both work great as a daily driver.Each one of these kits is loaded with upgrades options. I would consider also installing a steering stabilizer shock.

A: Thanks for the question 1234, The rear springs are angle corective and do have shims, this is a pretty complete, ready to run kit, The only other parts you will need is shocks, I would recomend these http://jo.my/wt5fbz

A: Hello FoxAstrophe, Rugged Ridge 4 to 5 Inch ORV Suspension Lift Kit part # RUG18415.60. Our stores would charge a 5 hour labor time for installation.

A: Hello Gary, for the Rugged Ridge 4 Inch ORV Suspension Lift Kit you should not need an extended pitman arm.

A: Jeep- Thank you for your question. I would recommend that when installing the Rugged Ridge 4 Inch ORV Suspension Lift Kit that you look into replacing the brake lines and also look into an slip yoke eliminator for the rear drive shaft.

A: Hi Beau This kit will not require you to change the drive shafts at the time of installation. over time you may wish to replace the shafts with a more conventional u joint style shaft to eliminate potential binding off road and vibrations. thank you

A: Hello Terry, We suggest yo upgrade to a longer shock with the Rugged Ridge 2 Inch ORV Budget Lift Kit RUG18415.80 installed on your vehicle. Thank you for the email.

A: Hello New Jeeper Joe, With a 33x12.50 tire I would recommend the 4 inch on your 1973 Jeep CJ5. If you need any further assistance with your build please feel free to ask us. Thank you for the email.

A: Hello martin, You will need to upgrade the factory shocks to a longer aftermarket package. Everything you need to install is included in this kit. Thank you for the email.