JK Off-Road Jack Mount allows you to carry your Off-Road jack on the outside of your vehicle saving precious cargo space. Fast and easy bolt on installation. Compatible with stock and most aftermarket rear bumpers (without tire carriers) as well as Rugged Ridge XHD rear bumper with or without tire carrier. Bracket is sturdy and secures the jack in two locations to eliminate any vibration noise during vehicle operation. Durable textured finish looks great. Fits most off-road style jacks including Hi-Lift
After lifting my JK and adding new bumpers, I knew that I would need a trail jack and a secure way to mount it. After looking at a number of kits, I settled on this one because it keeps the jack out of the weather and pretty much out of view. The mounts are versatile and give you 3-4 inches of play, up or down the rear roll bar. It is better if you loose fit the two ends and tighten them after you get your jack attached and leveled. I have no issues with the jack being stowed across the top of the tailgate opening because I can reach over or under it to load. Consider purchasing the rubber insulator for your jack handle and you won't have to endure any metal on metal rattles, coming from the rear.
Holds the Hi Lift jack tightly. Not the easiest for removing and reattachment of the jack, but will probably keep it from getting stolen. Works great for me. I'm not planning on using the jack on a regular basis.
As others have stated the instructions are very confusing. If you are installing the Jack mounting bracket with the Spartacus Spare Tire support and hinge you only need the two outer hinge bolts and the long spacers. Once I figured that out it works like a charm. I found it works perfect out of the box.
Actually my customer already had a jack mount just like this on his rig but we ordered it thinking this was a better unit. I corresponded thru email to try and get a return tag for this item but have seen no messages thru email. My name is Scott K. in parts department and email is skaser@larrygreen .us. Any help would be appreciated and thank you.
All the reviews I read said the instructions were awful, parts were hard to arrange, etc etc. took me thirty minutes with basic tools to install. I just left the hinge covers off in case I ever change my mind. Instructions were clear, logical and simple. Product seems sturdy. Jack fits. Doesn't rattle.
I had to 1/2 uninstall the lower bracket to install the bracket. You really need to figure it out because the instructions are so bad. I installed the lower bracket fully. Then installed the driver side of the upper bracket and loosely installed the passenger side of the upper bracket. I then undid the passenger side lower bracket and loosened the driver side lower bracket. I then re-installed the lower bracket with the bracket on it. This was hard to get the spacers behind the bracket and through the hole I had to drill in the cover. It was annoying, but in the end it was worth it, the installation looks great.
I am real happy with the mounting bracket.Easy to Uses Dont have to bend over to get to your Jack, and you can lock it. Witch is nice to know it will be there when you return. GREAT PRODUCT.
Q: Does this fit on the designated Hi-lift mount for Smittybilt XRC/SRC Gen2 Bolt-On Tire Carrier? Answer this question
A: It has not been tested on the Smittybilt parts by the vendor.
Answered by Kelly from 4WP Corporate Headquarters on 09/01/2021
Q: will this jack mount fit the tailgate of my 2006 X Wrangler? Answer this question
A: No, this only fits the 07-18 JK Wranglers.
Answered by Christian from 4WP HQ on 02/25/2021
Q: The base of my jack looks larger than the ones here. What size base will fit in this mount? Answer this question
A: Hey! This mount fits most off-road style jacks including Hi-Lift. Thanks!
Answered by Kelly from Ohio on 10/01/2020
Q: Will this work with stock bumper but a 33" tire on back? Answer this question
A: Hello Jamie, Yes, this will fit your with your configuration. Thank you.
Answered by RK on 09/05/2015
Q: Will this mount work with Trek Top NX frameless soft top? Will it still be able to be mounted when the top sides and back window are on? Answer this question
A: Hello Jim, No, this will not work with the Trek Top NX. Thank you.
Answered by RK on 04/30/2015
Rugged Ridge was established in 2005 by the company Omix-ADA to focus on innovative aftermarket Jeep accessories. Many of Rugged Ridge's recent designs are so innovative they have been patented. This includes their floor liners, snorkel and XHD Modular Bumpers. Since 2005 Rugged Ridge has developed and manufactured over 3,000 kinds of Jeep related products. All Rugged Ridge Jeep accessories are trail rated. The Omix-ADA founder came from a family that owned a small Jeep dealership. It was the founder's dream from a young age to own a company that made accessories for Jeeps. The founder manifested the dream in 1992. Shop Rugged Ridge Now
Join our mailing list to receive information on new products, special events, discounts and more!
Sign up to receive deals by email!
Sign up to receive text alerts about new product releases, exclusive access to sales, and much more!
Sign up to receive deals by text!