These Tie Rod Assemblies provide virtually 1-ton strength with factory tapered ends, so no modification is required. The tube is 1.25? OD SAE steel with .25? wall thickness. This is the perfect solution for preventing bent tie rod tubes from off roading with larger tires. Complete kits with dust shields, castle nuts, cotter pins, jamb nuts and zerk fittings.
So I got this from the 4wheel Parts, partly cause one of the guys there is running it on his XJ. Anyways yes its very beefy indeed. The issue I have with this is is that there is a ton of slop in ther steering and it also rolls or twist when you steer side to side. Also its a month or 2 old and the TIE's are already bad. I wish I would have researched more before hand I would have done over the knuckle. Live and learn
I have this setup on my TJ and need a replacement part. What is the replacement tire rod end # for the driver side connection?
GOLDSLOGGER from ALA. on
Hello Goldslogger, the Replacement Tie rod on the drivers side is part# Rug18043.10. Thank you for your question.
mikey from ALA. on
I have an 05 Jeep Wrangler X I put a 4.5 lift Rubicon Express long arm wit a tri-link in the rear. Will the tie rod fit my jeep? Also I'm getting a dual steering stabilizer from skyjacker will it all fit together?
soto from Yuma Arizona on
The Rugged Ridge heavy duty tie rod kit will come with a bracket to fit a factory replacement steering stabilizer. if you are definitely go with the dual steering stabilizer you will need to make sure that the stabilizer klit comes with u bolts that will fit a 1 1/2 bar. The SKY9240 http://jo.my/yfpxma will come with the correct u bolts.Thank You
Stevie from Yuma Arizona on
in the manufacturer description on the rugged ridge website, it specifies that this should not be used with a lift larger than 4". if i were to have approximately 4.25" on my 2001 jeep Cherokee, would i be able to solve this issue by using a dropped pittman arm? also, it said that this is not recommended for vehicles with less than 2" of lift, and as far as i can tell the only dropped pittman arms i can find are for a 3.5" lift or greater. essentially what i am asking is if i purchase this with a 4.25" lift on my jeep will it work, or will i need to correct things, and if so would a dropped pittman arm work for the correction? thanks
wes from on
The 1/4" of additional lift is not a concern its the 5-6" lifts were you run into problems with drag link to track bar angle issues and over all length of drag link bar problems. basically you start to run out of adjustment or un safe thread engagement. Thank ou.
Rugged Ridge was established in 2005 by the company Omix-ADA to focus on innovative aftermarket Jeep accessories. Many of Rugged Ridge's recent designs are so innovative they have been patented. This includes their floor liners, snorkel and XHD Modular Bumpers. Since 2005 Rugged Ridge has developed and manufactured over 3,000 kinds of Jeep related products. All Rugged Ridge Jeep accessories are trail rated. The Omix-ADA founder came from a family that owned a small Jeep dealership. It was the founder's dream from a young age to own a company that made accessories for Jeeps. The founder manifested the dream in 1992. Shop Rugged Ridge Now