Looking for a summer top that is easy to install and remove? The Rugged Ridge Eclipse Sunshade gives the open air and top down feeling you want, while providing added protection from harsh sunlight. Featuring reinforced mesh construction, the half sun shade installs between the front portion of a JK sport bar and windshield to protect either front or rear passengers separately. The full-length sun shade is secured between the windshield and the rear crossbar of the JK sport bar to protect both front and rear passengers simultaneously. By using the mesh material with built-in elastic straps, this sunshade was designed from the start to eliminate the need for a header channel as with other similar products. An all-in-one package, this sunshade is simple to install and does not require any modifications. By retaining access to the Jeep top clamps, drivers can keep the shade in place and preserve function of the factory top. The Eclipse Sun Shade installs with sewn-in bungee cords and a small mesh carrying bag for storage when not in use. Compact in size, the Rugged Ridge sun shade can be stored in just about any compartment of your Jeep for quick access. Available in your choice of tough black or hot red.
We buy 2 Jeeps for the family every rainy season and then sell them in sept while it is still sunny outside and we can make a couple bucks. So we purchased two of these a year. We only have a few months of sun here but it really helps when you’re sitting in traffic and it’s 90° you would not believe how much cooler it gets or I should say stays it’s worth every dollar. Especially since they are really not that much money when it comes to jeep accessories
Arrived on time. Fits perfect on my 2018 JKU Rubicon Recon.
Exactly what we wanted as a sunshade over the front seats of our JL 4-door. Access holes allow for reinstallation of the Freedom tops. Note: these holes are not supposed to line up either the Freefom top mechanisms; just allows your hand to reach up through them to close the latches. Velcro straps have easy grip red tabs to aid in separating the Velcro.
Knocked the Texas Sun off of us while driving over 1000 miles. No whistling. No flapping. No problems.(installed with /KC Pro6 Light bar)took the 4 screws on the inside of the windshield out and loosened the screws on the lightbar. Pushed forward (probably about 6 inches, lol. More than I expected). Put the 2 front anchors in…
Q: Technical details state that product installs with bungee balls. Are the bungees included with product? Answer this question
A: Hello M Coker The RUG13579.05 does come with the bungee balls and a carrying bag. Thank You for your question Jon Snyder 4Wheelparts
Answered by RK on 06/13/2015
Q: it currently says it doesn't fit my vehicle : "2007 JEEP WRANGLER (JK) X V6 - 3.8 Liter - GAS" the bullet points in the description says 07-15. making sure this will fit my JK before ordering it. - thanks. Answer this question
A: Hello SAMHAIN, This unit will fit the 2007 Jeep Wrangler JK provided it is a 2-moor model. Thank you.
Answered by RK on 05/25/2015
Q: Can the Eclipse Sun Shade be used on the 2 door '09 JK with front removable hard tops ??? I read your question /answers,but was not sure if this also covered the two door model removal hardtops? Is there a water proof type soft cover available for this application for when the covers are left behind and the weather turns in the mountains ?? Thanks for your help, Paul Answer this question
A: Hello Paul, Yes, the Rugged Ridge Eclipse Sun Shade Top RUG13579.04 can be installed with any top (Soft or Hard). They fit both 2 doors and 4 doors. They are not waterproof. We only offer the Bestop Header Bikini Top BST52586-35 that completely cover the front of the vehicle.
Answered by RK on 05/01/2015
Q: The 4wheelparts website says that this top does not fit me 2015 wrangler unlimited sahara. the literature on the item indicates that it does. which is correct? Answer this question
A: Hello tprince, The Rugged Ridge Eclipse Sun Shade Top will fit your vehicle application. Thank you.
Answered by RK on 04/12/2015
Q: Can this be easily installed and then left on with the hard top? Answer this question
A: Thanks for the question Suz789, It is recomended to be installed without the top off although I dont see why you couldn't leave it on.
Answered by lance on 10/21/2014
Rugged Ridge was established in 2005 by the company Omix-ADA to focus on innovative aftermarket Jeep accessories. Many of Rugged Ridge's recent designs are so innovative they have been patented. This includes their floor liners, snorkel and XHD Modular Bumpers. Since 2005 Rugged Ridge has developed and manufactured over 3,000 kinds of Jeep related products. All Rugged Ridge Jeep accessories are trail rated. The Omix-ADA founder came from a family that owned a small Jeep dealership. It was the founder's dream from a young age to own a company that made accessories for Jeeps. The founder manifested the dream in 1992. Shop Rugged Ridge Now
Join our mailing list to receive information on new products, special events, discounts and more!
Sign up to receive deals by email!
Sign up to receive text alerts about new product releases, exclusive access to sales, and much more!
Sign up to receive deals by text!
By submitting, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from 4 Wheel Parts (4WP) on 21208. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy