Rugged Ridge Drop Pitman Arms

A: Hi Skate_n_shuff, On a small lift such as the 2" a drop pitman arm works great to align the steering components, the adjustable track bar is usually only on taller lifts. Thanks for the inquiry!

A: Morrie, the Rugged Ridge Drop Pitman Arm will not be needed with a high steer kit. Since you will use the stock pitman arm, you do not need to worry about drilling anything. I hope this helps!

A: Thanks for the question Asher this is going to be a 3" drop from the stock size pit man arm. It will Fit 1984 to 2001 XJ Cherokee and 1993 to 1998 ZJ Grand Cherokee Thank you Answer box sales

A: A Rugged Ridge Drop Pitman Arm is usually only needed with a 4 inch or higher lift kit on an Jeep Cherokee XJ. If you look at your track bar angle the steering link should be at the same angle or very close. If your steering link is at a steeper angle than your track bar then you can use this to bring the angle down to match your track bar.

A: Hello! This drop pitman arm is specifically designed for a 4" to 8" XJ or ZJ. You should be fine to use this at 4.5" just make sure you keep both the trac bar and drag link parallel to each other, this will avoid any undesirable steering characteristics. Thank you!

A: This is specifically designed for a 4" to 8" XJ or ZJ. You should be fine to use this at 3.5" just make sure you keep both the trac bar and drag link parallel to each other, this will avoid any undesirable steering characteristics.