Rubicon Express Sway Bar End Links

A: The Rubicon Express Front Sway Bar End Link Kit - RE1152 is a pair.

A: Hello, These are 11.5" eye to eye. I found some for a JK , but I assume you have a TJ since you're looking at this part. Please call us so we can find the right size for your Wrangler perhaps in a different brand 877-474-4821 (have vehicle info available). Thanks for checking us out.

A: The RE1152 is for 3.5”-4.5” lifts.

A: I installed a Dynatrac 2 inch lift on my JL Rubicon. The Dynatrac lift swapped the rear links a to the front. I was not happy with this solution. This pair of links was perfect!

A: No they will not fit your WK.

A: They’ll work safely with shock lengths up to 27.5” extended length.

A: Re1157 is for Wranglers with a 3.5-4.5" Lift. RE1158 is 1/2" longer than stock.

A: 8"

A: Hey Danny, RE1155 is a direct replacements for the stock unit, retain stock hardware. If you need hardware Feel free to call into the sales line to place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: You should be in the clear zone, Keep your Jeeps Sway bar in its proper location after installing a suspension lift and ensure your Jeep handles safely with these sway bar links from Rubicon Express. Thanks!

A: 11.5" long

A: Hello Steve and thank you for your question! Rubicon Express Sway Bar End Links Front XJ/ZJ/TJ 3.5" is 7" eye to eye.

A: Hello Bob and thank you for your question! Rubicon Express Sway Bar End Links Front XJ/ZJ/TJ 3.5" will work for your Jeep with up to a 3.5" lift.

A: Hello Steve, the Rubicon Express Sway Bar End Link part# R/ERE1145 is for a 3.5" lift. usually a 2.5" lift doesn't require endlinks. If you are in need of some these should work since they are only a little longer than the stock links. Thank you for your inquiry.

A: Hello You didn't say what type of lift you put on. Going 2 inches won't change the ride if you used the coil spacers. If the lift was done by using new coils then it would be the coils being stiffer. I don't know if you changed the shocks when you lifted the Jeep that can be the cause also. If the shocks are gas charged and very stiff that will make the ride worse. The end links are normally used on 4 inch and higher kits.

A: Hello Jimmy, the Rubicon Express Sway Bar End Link part# R/ERE1157 are for a 3.5" to 4.5" lift. Thank you for your inquiry.

A: Hello Jay and thank you for your question! Rubicon Express Sway Bar End Links Rear TJ 3.5"-4.5" will fit your 2001 Jeep Wrangler with up to a 4.5" lift kit.

A: Hello jim and you for your question! Rubicon Express Sway Bar End Links Front XJ/ZJ/TJ 3.5" should have came with the sleeve bushings. If the end links did not dome with the sleeves please call our customer service line during the week and they will take care of you.

A: Philip- Thanks for the question. The Rubicon Express Sway Bar End Links Rear TJ 3.5"-4.5" are 9.5 inches eye to eye. The RE 1157 is 11.5 inches eye to eye

A: Kevin- Thanks for the question. The distance Eye to Eye on the the Rubicon Express Sway Bar End Link is 11.5 inches

A: Hello Ernie, The Rubicon Express Sway Bar End Link R/ERE1145 is designed for the front sway bar of the Fits 1997 to 2006 Jeep TJ Wrangler, Rubicon and Unlimited with a 3.5 Inch suspension lift kit installed. Thank you for the email.

A: Than k you for your question T. The Rubicon Express Gen II Joggle Sway Bar Link part number R/ERE1181 is a front end kit.

A: The R/ERE1181 is just a single replacement link end if you are looking for a set of end links you will be needing part number R/ERE1180 http://www.4wheelparts.com/Lift-Kits-Suspensions-Shocks/Sway-Bar-Disconnects-Set-W-10-Center-YJ-4-0.aspx?t_c=1&t_s=101&t_pt=4309&t_pn=R%2fERE1180

A: Part number R/ERE1181 Front End Links are for the front.